As of 2022, just 0.5% of installed renewable energy capacity worldwide is geothermal

Among renewable sources, geothermal rivals hydropower in lifetime cost

As of 2024, the levelized cost of energy—the average cost per unit of energy over the lifetime of a power plant—for geothermal power is surpassed only by solar photovoltaic and onshore wind. Geothermal's LCOE has remained relatively unchanged since 2007, with significant decreases held back by significant upfront installation costs.

Geothermal power may meet 15% of global electricity demand growth through 2050

According to the International Energy Agency, the estimate would require the construction of geothermal capacity with an annual output equivalent to the combined electricity consumption in the US and India in 2024. The report suggests geothermal investment will reach $2.5T by 2050, with the integration of fracking technologies decreasing costs by 80% by 2035.

Geothermal power plants can provide large-scale energy storage for other systems

These facilities can store excess energy from solar and wind power as hot water or steam, which can be used to run turbines to generate electricity when other renewable energy sources are unavailable. Simulations have found efficiencies of 90% during a storage-use cycle, making it comparable to lithium-ion batteries.

View a breakdown of global electricity generation in 2025, led by coal power plants.

The continuous decay of radioactive elements regenerates geothermal energy reserves

Geothermal power is a renewable energy source derived from Earth's interior, where the core reaches temperatures exceeding 5,000 degrees Celsius (9,000 degrees Fahrenheit). These temperatures result from leftover energy from collisions during planetary formation, with radioactive decay in the core releasing additional energy that travels to the surface.

Like nuclear power, US geothermal power plant construction stalled for decades

Development and investment into geothermal energy took off in the 1960s. However, by the 1980s, companies repeatedly failed to find reservoirs of hot water when exploring new locations, and investors lost interest in the expensive drilling required. By the 2020s, technological advancements had finally helped mitigate exploration risk and expand viable drilling locations.

Fracking technology can help make geothermal power possible almost everywhere

Generating electricity from Earth's thermal energy has previously required existing underground reservoirs of hot water and permeable rocks through which the fluid naturally escapes. Today, fractures can be artificially created to form fluid pathways, and surface water can be injected underground and brought back to the surface.

Geothermal power can generate electricity and provide direct heating for homes

By drilling several kilometers through penetrable rock, wells can access highly pressurized groundwater warmed by thermal energy trapped beneath Earth's surface. This water can be turned into steam to create electricity in generators. Heating systems several meters deep can pump fluid underground before circulating it through buildings.

Geothermal heat pumps have the greatest upfront cost of any home heating system

As of 2025, installations of these systems can range from $15,000 to over $40,000, significantly more than for furnace-air conditioner and air-source heat pump systems. However, they are up to 50% more efficient than these alternative systems, making them able to pay for themselves within 15 years.

Explore next-generation geothermal projects worldwide

This tool from the Clean Air Task Force allows users to see the location of geothermal power systems to depths of 12.5 kilometers (7.8 miles), where temperatures reach about 450 degrees Celsius (842 degrees Fahrenheit), including proposed, abandoned, and in-development projects.

Wind energy is categorized into land-based, distributed, and offshore types

Distributed wind turbines efficiently serve on-site energy needs, while land-based turbines are large and generate cost-competitive electricity. Offshore wind turbines capture powerful winds above the ocean and may be pounded into the seafloor using pile drivers or built to float above water at scales larger than the Statue of Liberty.

View breakdowns of the world's and each nation's electricity comes from

These charts show how the shares of generated electricity sources—solar, wind, hydro, nuclear, bioenergy, oil, gas, and coal—have changed since 1985. Since 2010, an increase in renewable sources has offset the share lost by nuclear and fossil fuels.

Geothermal power can reduce the dangerous mining of rare earth elements

Geothermal brines—mineral-rich underground fluids extracted for use in geothermal plants—contain small concentrations of REEs that can be recovered after energy generation. Although researchers suggest that this retrieval requires complex extraction methods at a significant scale to account for high flow rates, the chemical processes also occur in traditional REE processing.

Solar power is converting the sun's energy into thermal or electrical energy

Solar energy is the most abundant renewable energy resource. It can be captured in photovoltaic cells to generate electricity, solar heating and cooling technologies for temperature control, and concentrated solar power to drive steam turbines.

Clean energy technologies are more mineral-intensive than burning fossil fuels

Solar panels use silver due to its high conductivity, hydropower plants use chromium in their steel alloys, and geothermal plants need titanium to withstand abundant heat and pressure. Lithium—used in energy storage—is expected to see over 500% increased demand from 2020 to 2025.

Enough sunlight hits Earth in just 90 minutes to power the planet for an entire year

Despite this, in 2023, only 5.1% of electricity in the US came from solar energy. Solar panel technology has nonetheless made significant advancements since the 19th century, largely due to NASA's efforts in the space race.

Some renewable energy sources may weaken the resiliency of electric grids by removing outage buffers provided by coal- and natural gas-fired plants, which provide the system with more time to find a new power source if a plant goes down.

Explore global solar resources with this interactive map

One of the biggest challenges to deploying solar panels is whether electricity can be generated reliably when needed, day after day. This detailed interactive map calculates the solar power output potential of regions worldwide and provides a visual comparison between locations such as North Africa and the US Midwest.

Wastewater from geothermal power plants helps melt sidewalk snow in Iceland

Located on the Mid-Atlantic ridge, where the North American and Eurasian tectonic plates move apart, the nation saw geothermal power meet more than 90% of its heating demand in 2024. After the hot water produced by these plants is used to heat homes and businesses, it is transferred through small pipes beneath Reykjavík's sidewalks.

Renewable energy basics

Discover the many benefits to using renewable energy resources, but what is it exactly? From solar to wind, it’s the fastest-growing source of energy in the world – and how we can use it to combat climate change.

Data from 2020 suggests that fossil fuels are the most dangerous and least clean energy sources, causing the most deaths and emitting the most greenhouse gases per unit of energy generated.

Nuclear power supplies almost half of US carbon-free energy

As of 2023, nearly 20% of US electricity comes from nuclear power, but most reactors were built from 1971 to 1990. Expansion slowed due to safety concerns, high costs, and competition from natural gas.

Some geothermal power plants make electricity using a secondary fluid

Direct dry-steam systems pull underground steam into a turbine-generator system, while flash and double-flash cycle systems spray extracted liquid water into a low-pressure tank, causing it to rapidly vaporize—"flash"—before moving to the turbine. Binary cycle systems use the extracted steam and water to flash a second fluid that easily boils, which then drives the turbine.

Agricultural land remains mostly unchanged after wind projects

From 2012 to 2020, less than 0.05% of available US farmland had commercial wind turbines installed. More than 95% of this land lacks wind farm structures such as turbine pads or roads, leaving most cropland and pasture-rangeland unchanged.

Why decarbonizing the entire electric grid is impossible with its current infrastructure

Fossil fuel plants can be built anywhere and have thus typically been built near highly populated areas, such as coastal cities, where electricity demand is high. However, certain renewable resources operate most efficiently in specific regions, such as wind turbines in the Midwest, and therefore require substantial transmission infrastructure to be constructed to transport the generated electricity.

Find out how much energy in the US comes from renewable sources and other FAQs

Browse frequently asked questions about renewables, from the amount of energy production by state to the cost of electricity generation by power source.

Geothermal power can be used beyond heating and energy production

Depending on the depth of the natural vents or artificial wells drilled, the surrounding fluid temperature will vary greatly—from 10 to 371 degrees Celsius (50 to 700 degrees Fahrenheit)—allowing for various applications, including the drying of cement, concrete, and lumber, as well as the processing of pulp and paper.

All clean energy technologies rely heavily on critical minerals

Although many of these minerals have been used for decades, such as copper in electrical wiring, the accelerating demand for them has strained existing extraction and processing systems. Supply chain disruptions for these materials may delay and increase the cost of transitioning to solar, wind, hydroelectric, and geothermal power.

The world's first geothermal power plant was built in 1913 in Devil's Valley

In Tuscany, Italy, Prince Piero Ginori-Conti of Trevignano established the plant nine years after creating a generator that powered five light bulbs using steam vents in the area. Within three years, a second plant was built with two generators, each with 10 times the energy output of the first.

Larger shares of solar power generation produce larger energy demand curves

Because solar energy is only available during daylight hours, transitioning an electric grid to solar requires significant ramp-ups and ramp-downs of other energy sources during mornings and evenings to compensate. Widespread adoption of affordable energy storage solutions can soften these curves.

Electric grids that rely on solar power must compensate for reduced electricity generation during solar eclipses.

Sand 'batteries' can store excess electricity from the power grid as thermal energy

Energy collected from solar or wind power is used to heat insulated silos full of sand to temperatures as high as 450 degrees Celsius (842 degrees Fahrenheit), which can be retained for long periods. These thermal energy storage systems can be designed to boil water and generate electricity when needed.

Explore which sectors produce the most greenhouse gas emissions by country

As of 2023, the energy sector, including electricity and heating, accounts for the largest share of greenhouse gas emissions. The 10 largest greenhouse gas-emitting nations account for two-thirds of global emissions, with the world's top three—China, the US, and India—contributing 15 times more than the bottom 100.

Establishing the wind power grid required incentives, reliability, and affordability

Although wind was harnessed to generate electricity for individual buildings in the late 1800s, high costs, mechanical issues with turbines, and better fossil-fuel alternatives delayed wind power's widespread growth. After the oil crises of the 1970s, governments sought alternative energy sources and, in the decades that followed, provided tax credits to expand the wind power market.

As of 2024, approximately 44% of Americans support fracking

This makes the method less popular than carbon-free forms of energy production, such as solar, wind, and nuclear power, but more popular than coal mining. Support for fracking increased 7% from 2020 to 2024, primarily due to increased support from Republicans and older Americans.

View a photo essay of renewable power landscapes in China

Using a drone, Chinese photographer Weimin Chu captured the deployment of solar and wind power installations across the country, which accounted for half of all global installations in 2025. The images show modern infrastructure juxtaposed with natural landscapes and was featured in an award-winning exhibition presented by Greenpeace in 2025.

Earth's easily accessible surface water in rivers and lakes accounts for about 0.01% of all the water on Earth, but 70% of this surface water is used for agriculture.

As of 2025, wave power projects remain in early research and testing phases

Waves can become a steady source of renewable energy because they do not pause like wind and solar power do. However, funding gaps and the effects of storms, salt exposure, and biofouling—mussels and other sea creatures attaching to wave machines—have presented challenges in scaling the technology beyond testing sites.

The world derives more of its energy from oil than from any other resource

Coal and gas are second and third, respectively, in terms of where the bulk of the world’s energy consumption stems from. These interactive charts can help you visualize where the world sources the most of its energy.

Wind turbines are limited to capturing no more than 59.3% of incoming wind energy

In 1919, German physicist Albert Betz applied the laws of conservation of mass and momentum to airstreams to calculate the theoretical limit. However, real-world turbines only convert 35 to 45% of available wind energy into electricity.

Despite electric usage concerns, EV charging accounts for less than 1% of grid load

Other popular myths about EVs include battery failure concerns—failure rates are less than 1% on newer models—and that there are no places to charge cars, though both at-home outlets and more than 77,000 stations on the road are available.

From 1990 to 2020, wind turbine height and blade length have more than tripled

Wind turbines' energy generation capacity—or maximum power rating—also increased by 375% from 1998 to 2023. As of that year, wind turbines can produce more energy per dollar than solar panels, though transportation and installation challenges remain.

View US maps of average daily solar resources and solar-based electricity generation

The state you live in can drastically change how much solar energy you can expect to capture to power your home. These National Laboratory of the Rockies maps show where you can reliably generate solar resources.

A 1,000 square kilometer patch of solar panels in Africa can power most of Europe

The $500 billion Desertec initiative would have constructed massive solar farms in the Sahara and expansive electrical transmission networks across continents. However, the plan was built on concentrated solar power technology, which is more expensive and less practical than photovoltaics.

Understanding the power grid and how renewable sources fit in

The power grid is evolving to include ever-higher levels of solar and wind, which don't provide inertia. Should system planners and operators panic?

Solar energy alone can fully power the world if transmission hurdles can be resolved

When light strikes a photovoltaic cell, electrons are loosened, which travel through a circuit where the energy can be used. Distributing energy from high solar intensity regions and storing energy for non-daylight hours is logistically challenging and costly.

See where the 94 nuclear reactors in the continental US are located

In 2023, these reactors—located in 53 plants across 28 states—prevented 437 million tons of carbon dioxide emissions. A single fingertip-sized uranium pellet generates as much electricity as a ton of coal, enough for one household's annual electricity.

The carbon footprint of manufacturing a wind turbine is offset within seven months

Despite initial carbon emissions during manufacturing, wind turbines generate nearly zero pollution across their 20- to 25-year lifetimes. Offsets occur when turbines replace energy generation from coal and natural gas plants, which emit carbon dioxide.

Since 2022, two-thirds of data centers have been built in water-stressed areas

In residential evaporative cooling systems, 10% of consumed water is lost to evaporation compared to 80% in data centers. Although some companies have pledged to become water-positive—replenishing more freshwater than they consume—by 2030 through a transition to air cooling, only 10% of data center operators track water use across all their facilities.

As of 2025, China used the most electricity of any country, accounting for 33% of the total global demand and more than twice that of the US.