Some renewable energy sources may weaken the resiliency of electric grids by removing outage buffers provided by coal- and natural gas-fired plants, which provide the system with more time to find a new power source if a plant goes down.

Understanding the power grid and how renewable sources fit in

The power grid is evolving to include ever-higher levels of solar and wind, which don't provide inertia. Should system planners and operators panic?

More batteries in the power grid would create an on-demand energy reservoir

Most power grids are inefficient because they require enough generation capacity at all times to avoid blackouts. This means at any given time, as much as 50% of generating capacity at power plants can go unused. Batteries would reduce this inefficiency and allow for real-time adjustments.

Why decarbonizing the entire electric grid is impossible with its current infrastructure

Fossil fuel plants can be built anywhere and have thus typically been built near highly populated areas, such as coastal cities, where electricity demand is high. However, certain renewable resources operate most efficiently in specific regions, such as wind turbines in the Midwest, and therefore require substantial transmission infrastructure to be constructed to transport the generated electricity.

Why is hydropower important when other power sources go dark?

Hydropower can ramp up, recoup shortfalls, and stabilize the grid nearly instantaneously. A new study quantifies the energy source’s contribution to grid stability.

Examining the causes of power outages, from system damage to preventative measures

Stray balloons, contact with trees, malfunctioning equipment, and severe weather are among the causes of failures that can cause widespread, unplanned blackouts. Although contingency options that rely on alternative transmission pathways to deliver electricity from generators to consumers may be possible, some shutoffs, brownouts—available power is reduced—and cycles of repeated outages may be intentionally implemented to protect public safety.

Geothermal power plants can provide large-scale energy storage for other systems

These facilities can store excess energy from solar and wind power as hot water or steam, which can be used to run turbines to generate electricity when other renewable energy sources are unavailable. Simulations have found efficiencies of 90% during a storage-use cycle, making it comparable to lithium-ion batteries.

View a breakdown of global electricity generation in 2025, led by coal power plants.

A look at how power is restored after an outage on the electric grid

From minor system failures to more widespread blackouts, crews begin by assessing damage done to infrastructure, such as transmission towers and distribution power lines. Prioritizing essential services, such as hospitals, crews then begin restoration, starting with any damage found closest to the power generation and working down the distribution system to customers.

Larger shares of solar power generation produce larger energy demand curves

Because solar energy is only available during daylight hours, transitioning an electric grid to solar requires significant ramp-ups and ramp-downs of other energy sources during mornings and evenings to compensate. Widespread adoption of affordable energy storage solutions can soften these curves.

Learn how critical services, infrastructure, and people would be impacted by a US-scale blackout—a nationwide, long-term failure of the electric grid.

During emergencies, backup diesel generators in data centers emit substantial pollution

During power outages or when the power grid is at insufficient capacity, these generators emit 200 to 600 times more nitrogen oxides—a greenhouse gas—than natural gas plants, as well as fine particulate matter linked to respiratory disease.

How microgrids can modernize electric grids to meet 21st-century demands

Just as having a single, outdated internet service provider leaves an area helpless in the case of an outage, failures in the electric grid can be devastating to communities. For this reason, hospitals, data centers, and other structures have their own backup power supplies. However, decentralized microgrids would provide areas with their own electricity generation and storage, thereby reducing overall grid load and reliance while enabling better electricity management.

Electric grids that rely on solar power must compensate for reduced electricity generation during solar eclipses.

All clean energy technologies rely heavily on critical minerals

Although many of these minerals have been used for decades, such as copper in electrical wiring, the accelerating demand for them has strained existing extraction and processing systems. Supply chain disruptions for these materials may delay and increase the cost of transitioning to solar, wind, hydroelectric, and geothermal power.

As of 2022, just 0.5% of installed renewable energy capacity worldwide is geothermal

Despite being able to generate electricity regardless of the weather, solar (28%) and wind (27%) are far more prevalent, primarily because of their lower upfront costs. Geothermal plants use 88% less space than solar farms to produce the same energy, but have been restricted to geologically active regions.

Clean energy technologies are more mineral-intensive than burning fossil fuels

Solar panels use silver due to its high conductivity, hydropower plants use chromium in their steel alloys, and geothermal plants need titanium to withstand abundant heat and pressure. Lithium—used in energy storage—is expected to see over 500% increased demand from 2020 to 2025.

The engineering underlying the electric grid and why it needs to be modernized

The system includes generators for producing electricity and millions of miles of transmission and distribution lines to transport the energy. The substantial increase in the number of electronic devices and electrical demand since the construction of much of the grid in the mid-1900s has strained infrastructure, requiring continuous upgrades and massive investments in new construction.

View breakdowns of the world's and each nation's electricity comes from

These charts show how the shares of generated electricity sources—solar, wind, hydro, nuclear, bioenergy, oil, gas, and coal—have changed since 1985. Since 2010, an increase in renewable sources has offset the share lost by nuclear and fossil fuels.

Simulate the effects of changing supply and demand on the electric grid

In this application, users can modify the demand of fictional cities and the supply of various generators, including a nuclear power plant and a wind farm, which can be disconnected from the grid. Notice that current may flow into or out of external systems to compensate for available generation. See what it takes to cause a blackout in different cities or shut down the entire grid.

Establishing the wind power grid required incentives, reliability, and affordability

Although wind was harnessed to generate electricity for individual buildings in the late 1800s, high costs, mechanical issues with turbines, and better fossil-fuel alternatives delayed wind power's widespread growth. After the oil crises of the 1970s, governments sought alternative energy sources and, in the decades that followed, provided tax credits to expand the wind power market.

The benefits and risks of smart grids, from improved efficiency to cybersecurity risks

By using a network of devices, including digital meters, sensors, and controllers, smart grids can quickly detect mechanical issues and fluctuations in supply and demand, automatically adjusting electricity flow to prevent cascading failures. While this is important for variable solar and wind power generation, many of these computer systems are designed to be controlled remotely, which increases the risk of malicious access.

Sand 'batteries' can store excess electricity from the power grid as thermal energy

Energy collected from solar or wind power is used to heat insulated silos full of sand to temperatures as high as 450 degrees Celsius (842 degrees Fahrenheit), which can be retained for long periods. These thermal energy storage systems can be designed to boil water and generate electricity when needed.

Data from 2020 suggests that fossil fuels are the most dangerous and least clean energy sources, causing the most deaths and emitting the most greenhouse gases per unit of energy generated.

Some geothermal power plants make electricity using a secondary fluid

Direct dry-steam systems pull underground steam into a turbine-generator system, while flash and double-flash cycle systems spray extracted liquid water into a low-pressure tank, causing it to rapidly vaporize—"flash"—before moving to the turbine. Binary cycle systems use the extracted steam and water to flash a second fluid that easily boils, which then drives the turbine.

Find out how much energy in the US comes from renewable sources and other FAQs

Browse frequently asked questions about renewables, from the amount of energy production by state to the cost of electricity generation by power source.

Wind energy is categorized into land-based, distributed, and offshore types

Distributed wind turbines efficiently serve on-site energy needs, while land-based turbines are large and generate cost-competitive electricity. Offshore wind turbines capture powerful winds above the ocean and may be pounded into the seafloor using pile drivers or built to float above water at scales larger than the Statue of Liberty.

Electrical grids worldwide must double their power delivery capacity by 2050 to meet surging demand from AI and electric vehicles.

Visualize how alternating currents—electricity that periodically changes direction—are generated by rotating magnetic fields, as occurs in turbine-generator systems.

In nuclear reactors, water acts as a coolant and moderator, slowing neutrons produced in nuclear reactions so they are more likely to interact with nuclear fuel and generate sustainable energy.

Data center power demands have delayed the retirement of coal plants

US data center power consumption is expected to triple by 2035 to meet the growing infrastructure needs of AI platforms. Longer construction times and higher startup costs for renewable energy systems such as wind and solar have led to at least 15 coal power plant closures being postponed.

Wind turbines explained

Wind turbines have powered homes since 1887, and today they’re stronger, quieter, and more reliable than ever. Offshore wind could power millions and grow fast enough to meet climate goals.

Discover why Texas runs its own electric grid, separate from the other US interconnections

In 1935, electrical utilities in the Lone Star State opted to rely on the state's own fossil fuel reserves to power an independent electric grid. While this prevented the federal oversight required for the Eastern and Western Interconnections that span multiple states, it also meant Texas's grid was unable to draw sufficient backup power during the winter 2021 power grid failure.

Renewable energy basics

Discover the many benefits to using renewable energy resources, but what is it exactly? From solar to wind, it’s the fastest-growing source of energy in the world – and how we can use it to combat climate change.

Among renewable sources, geothermal rivals hydropower in lifetime cost

As of 2024, the levelized cost of energy—the average cost per unit of energy over the lifetime of a power plant—for geothermal power is surpassed only by solar photovoltaic and onshore wind. Geothermal's LCOE has remained relatively unchanged since 2007, with significant decreases held back by significant upfront installation costs.

As of 2025, wave power projects remain in early research and testing phases

Waves can become a steady source of renewable energy because they do not pause like wind and solar power do. However, funding gaps and the effects of storms, salt exposure, and biofouling—mussels and other sea creatures attaching to wave machines—have presented challenges in scaling the technology beyond testing sites.

The carbon footprint of manufacturing a wind turbine is offset within seven months

Despite initial carbon emissions during manufacturing, wind turbines generate nearly zero pollution across their 20- to 25-year lifetimes. Offsets occur when turbines replace energy generation from coal and natural gas plants, which emit carbon dioxide.

Technological advancements will make future wind turbines more efficient and quieter

Manufacturing larger, more powerful turbines will result in future wind farms requiring fewer of them to meet energy demands. Larger turbines will meet these demands while rotating at lower speeds, reducing risks to avian wildlife.

Due to their enormous size, wind turbines are assembled on-site using prefabricated components, advanced cranes, and vibration-damping systems to withstand the dynamic ocean environment.

View an interactive map of US power plants, which generate electricity from coal, gas, water, biomass, nuclear fuel, oil, sunlight, and wind.

Solar energy alone can fully power the world if transmission hurdles can be resolved

When light strikes a photovoltaic cell, electrons are loosened, which travel through a circuit where the energy can be used. Distributing energy from high solar intensity regions and storing energy for non-daylight hours is logistically challenging and costly.

Learn why electrical substations are needed to provide safe electricity with minimal energy loss

These typically fenced-off facilities with steel boxes or cylinders topped with cone-like caps house circuit breakers, fuses, and switches that can isolate sections of the grid to prevent electrical failures from spreading. Substations use transformers to modify electrical voltage and are customized to the generation, transmission, and distribution networks they interconnect.

Solar power is converting the sun's energy into thermal or electrical energy

Solar energy is the most abundant renewable energy resource. It can be captured in photovoltaic cells to generate electricity, solar heating and cooling technologies for temperature control, and concentrated solar power to drive steam turbines.

Understanding how non-profit entities manage electric grids to ensure supply-demand balance

Independent System Operators in smaller areas and Regional Transmission Organizations that operate across multiple states run wholesale electricity markets. Electricity suppliers can submit competitive bids to meet estimated demand in day-ahead markets while keeping consumer costs low. ISOs and RCOs also inform markets of deviations in these estimates so that suppliers can adjust how much power they generate, which is then bought and sold in real time.

Carbon-neutral data centers may be possible if built within wind turbines

Wind turbine towers are typically hollow, housing only cables and a ladder for maintenance access. The excess electricity a wind turbine collects could power a stack of server racks more than 100 meters (328 feet) high within its tower.

Explore global solar resources with this interactive map

One of the biggest challenges to deploying solar panels is whether electricity can be generated reliably when needed, day after day. This detailed interactive map calculates the solar power output potential of regions worldwide and provides a visual comparison between locations such as North Africa and the US Midwest.

Fiberglass and epoxy resin on blades complicate the recycling of wind turbines

Between 85 and 95% of a turbine's materials—except for the blades—can be recycled. Blades have been left in landfills when not repurposed into playgrounds and sheds, but new processes may allow them to be made into pellets for injection plastics and concrete.

AI's growing energy demands are driving tech companies to consider nuclear power

Big Tech has rebranded nuclear power as a green solution to address the strain on the grid from millions of people using power-hungry AI tools. As of mid-2025, generating one image uses as much electricity as charging the average smartphone, or leaving a household light bulb on for 87 consecutive days.

The history of the North American power grid, which is composed of five major grids

Thomas Edison's Pearl Street Station was the first US commercial power plant, burning coal to power lamps for some Manhattan residents. Over time, local power plants would be bought out by larger ones, forming interconnected systems spanning multiple states. Today, the Eastern Interconnection and Western Interconnection are the largest of these systems.

An overview of hydropower

Hydropower, or the use of the natural flow of moving water to generate electricity, is one of the oldest and largest sources of renewable energy.

Maintenance, curtailment, congestion, and wind speed can park a wind turbine

Wind turbines are optimized to operate at wind speeds between about 10 and 80 kph, but an internal brake stops them if energy is not required. Routine preventative maintenance and cleaning also prevent blades from rotating.