Thunderquakes—seismic waves created when lightning strikes the ground—have enabled scientists to image underground environments near Earth's surface by detecting vibrations along subterranean fiber-optic cables.

Because seismic waves travel 100 times faster than tsunami waves—waves typically travel faster through solids than liquids—measurements of geological activity help tsunami detection systems provide early warnings.

Likened to a car backfiring or a faraway cannon fire, skyquakes have been reported worldwide in Earth's atmosphere without any obvious cause.

Scientists determine earthquake locations by comparing how long it takes different seismic waves to be detected at three stations around the world, from which an origin, or hypocenter, can be triangulated.

Video and still images are combined with sonar data to create seafloor maps

Sonar works by sending thousands of sound pulses per second towards the seafloor, capturing the strength and timing of the returning echo. This data can accurately reveal depth, seafloor texture, and the presence of fish habitats to millimeter resolutions.

When GPS and sonar are unavailable, submarine navigation relies on a fiber-optic gyroscope to determine the vessel's orientation and an accelerometer to calculate distance traveled.

Rather than predicting them in advance, earthquake early warning systems detect tremors moments after they begin and send notifications that reach users before the seismic activity does.

Some scientists hypothesize that stressed rocks can discharge built-up static electricity in the form of lightning—a phenomenon known as fracto-luminescence, or earthquake lights.

Enhanced geothermal power systems can trigger earthquakes by injecting fluid into rock, increasing subterranean pressure.

The frequency of earthquakes and the distribution of their magnitudes have not changed significantly over long-term records, but technological improvements have enabled scientists to detect more of them as they occur.

Scientists investigate Earth's interior by studying seismic waves

Scientists investigate Earth's interior by studying seismic wavesBelow Earth's atmosphere lies the crust, which extends to the Mohorovičić discontinuity between five and 20 miles below Earth's surface. Below the crust lies the mantle, the liquid-metal outer core, and the solid inner core, which surpasses 5,200 degrees Celsius (9,392 degrees Fahrenheit).

What makes the Earth shake?

Researchers are demystifying the science of earthquakes—from their origins deep within the Earth to the scales that measure their strength. This article, which was part of a series of weekly reports from Cornell University, serves as a guide to...

View maps of seafloor topography, earthquakes, and volcanic activity, which scientists use to create outlines of Earth's tectonic plates.

Some earthquakes can produce smaller tremors called boomerang earthquakes, which travel in the opposite direction and ripple back to the original earthquake's source.

Just as light bends at different angles as it travels through different materials, seismic waves move in different directions through Earth's interior, revealing the presence of layers with varying properties.

Micro-seismic activity has been produced from people cheering or dancing at sporting events, concerts, and other large gatherings, but scientists can easily distinguish these vibrations from natural earthquakes using seismometers.

A case study of how engineers and geologists at Tullow Oil look for oil reserves

An analysis of surface rocks using aerial and satellite imagery can help narrow the search for crude oil by identifying basins where sedimentary layers have compacted—a key process in oil formation. Surveys that look for variations in Earth's gravitational and magnetic fields consistent with specific rock distributions, or that use sound waves reflected off rock layers—not unlike sonar underwater—can also help map subsurface geology.

See top-down views of Washington state's geology with cutting-edge lidar

Lidar is a revolutionary tool that creates visual models of landscapes using rapid light pulse measurements. Geologists in Washington state have deployed the technology to study the state's fault lines, landslides, tsunami inundation zones, and much more.

As of 2025, humans have only dug 0.2% the way to Earth's center

The Kola Superdeep Borehole revealed two billion-year-old fossils and underground water, but the immense temperature and pressure prevented further tunneling. Beyond those depths, scientists know of Earth's interior by analyzing how seismic waves move.

Sonar, or sound navigation and ranging, uses reflected sound waves to map and detect seafloor features, marine organisms, and other obstacles.

Visualize the power and frequency of earthquakes across the moment magnitude scale, where a whole number increase corresponds to about 32 times more energy released.

Gravitational waves—ripples in the fabric of spacetime—are detected at LIGO by measuring how two lasers traveling down equally distant, perpendicular tunnels interfere with one another after they reflect back and meet.

Although earthquakes cause about 80% of tsunamis, almost all earthquakes lack sufficient energy to cause the sudden shift in the ocean floor needed to substantially displace enormous volumes of water.

Learn about the construction of the undersea fiber optic cables carrying internet data

Over 750,000 miles of fiber-optic cables run along the seafloor, serving as a freeway for the Internet's data. Despite subsea cable projects costing hundreds of millions of dollars, depending on the length of the cable, it remains the fastest and most cost-effective way to send information.

View the past month of earthquakes worldwide with this digital globe, which displays data from the US Geological Survey.

Scientists can map Earth's shape and structure by measuring the ratios of certain particles arriving from different directions in space, as these ratios change with the density of the material particles travel through.

Disposal wells for fracking wastewater have been linked to spikes in seismic activity

A study of all such underground wells in the central and eastern US found that they were 1.5 times more likely to be associated with earthquakes than oil recovery wells. The link between fluid injection and earthquakes was strongest at disposal wells where fluid was injected quickly.

Why starquakes may explain various phenomena associated with neutron stars

Fast radio bursts—repeated millisecond-long pulses of enormous energy from neutron stars—are emitted with a timing that resembles the earthquakes and aftershocks seen on Earth when geological activity releases energy from within the planet. Although pulsars should gradually spin more slowly as they lose energy from emitting jets of radiation, sudden increases may result from interior matter moving during starquakes.

Scientists can create movies of atomic and molecular phenomena using X-ray free-electron lasers, in which images are produced by matter being struck by high-intensity light created by accelerating electrons.

In an X-ray free-electron laser, electromagnetic fields are used to accelerate and move electrons in wiggling patterns, causing them to emit synchronized, high-energy X-rays. This resulting light beam can strike targets up to 120 times per second to create movies of changing molecular structures and phenomena.

Geological tremors on the moon provide evidence that it is shrinking

Apollo seismometers have collected moonquake data, which scientists have analyzed to map the moon's interior and reveal that fault slips producing tremors are the result of sublunar cooling and contraction. It also revealed that the moon's inner core is about 500 kilometers (311 miles) across.

Tornadoes produce inaudible signals to humans hours before forming

Researchers at the National Oceanic and Atmospheric Administration have found that tornado-producing storms generate specific sounds below the range of human hearing, much like the infrasonic signals produced by earthquakes and avalanches. Although difficult to distinguish from wind noise, scientists hope to build systems that use these signals to improve tornado forecasting.

Scientists determined that tectonic plates moved the ocean floor by observing symmetric patterns of magnetic stripes on opposite sides of underwater volcano systems, which could only result from seafloor spreading.

Track lightning strikes around the world

The Blitzortung platform triangulates the positions of this phenomenon from stations that detect atmospheric interference in low-frequency signals that are characteristic of lightning strikes. A network of nearly 2,000 stations transmits the required data to a central server, where its software performs these calculations and generates the subsequent visualization.

How we know what's deep inside the Earth, despite never traveling there

We'll likely never see the Earth's core, but we can make educated guesses about what it's like down there. Nearly as hot as the sun's surface and under impossibly high pressure, the inner Earths extreme conditions make it impossible to explore. Yet, seismic waves during earthquakes, volcanic eruptions, and light waves from the sun provide fascinating insights about our planet's mantle, crust, and core.

Ultrasound machines emit and receive high-frequency sound waves to construct images of the body's interior, with differences in the penetrating power of different frequencies allowing medical professionals to identify different structures.

Earthquakes of identical magnitudes are unlikely to cause equal damage because magnitude only measures energy released, and earthquake severity depends on environmental factors, such as local architecture and geological conditions.

The four types of seismic waves—vibrations that carry energy generated by geological events, such as earthquakes—are categorized as body or surface waves.

How lasers have become a go-to in archaeology

Archaeological teams now have another item to pack with their trowels: Lasers. Researchers' approach to unsurveyed land has been transformed by light detection and ranging technology. LiDAR has helped archaeologists break new ground and uncover...

Although an estimated 99.999% of the deep ocean has not been explored, techniques such as sonar have been used to identify the deepest known point in each of Earth's five oceans.

Deep-sea trenches form when one tectonic plate subducts another underwater

Oceanic plates sink when colliding with less dense continental plates, bending the seafloor into steep depressions that can be almost 11 kilometers deep. Many of Earth’s strongest earthquakes occur at these plate boundaries, often featuring volcanic activity.

From 2018 to 2022, NASA's InSight Lander used three primary instruments to measure Martian seismic activity, subterranean heat flow, and wobbles of its north pole.

Scientists have tested atmospheric models by firing rockets into the aurora borealis

Functioning like components of a CT scan, the missiles transmit signals that can be used to identify charged particles and electromagnetic currents in slices. The slices are then combined to construct a computer-based model of Earth's atmospheric structure, which is used to compare the accuracy of physics-based models.

Lidar's discoveries: 32 forts revealed by the laser tech

Lidar is a cutting-edge tool using lasers from an aircraft to map the elevations of huge swaths of land across the world. This technology has been especially effective in archaeology. It has revealed dozens of lost major historical sites concealed beneath overgrown brush and forests. From Canadian forts to Mayan settlements, check out these 32 significant finds from lidar.

Explore a searchable map of underwater cables carrying internet traffic worldwide

The Submarine Cable Map provides users with data from TeleGeography's Transport Networks Research Service on individual submarine cables, including cable owners, suppliers, URLs, landing points, lengths, and notes of interest.

Potential LIGO sites were selected in pairs, approximately 3,000 kilometers apart

The 1,864-mile distance meant gravitational wave signals would be detected no more than 10 milliseconds apart, ruling out many background signals. The sites needed sufficient plots of nearly flat land, proximity to infrastructure (e.g., electricity), and adequate distance from urban areas and geologically active areas to reduce environmental noise.

The earliest earthquake-detection device—the seismoscope—was invented in China in 132 CE and featured eight ball-wielding dragons facing different directions.

Lasers, semiconductors, medical imaging, and atomic clocks rely on quantum mechanics

Semiconductors, crucial in electronics, operate based on quantum superposition. Lasers use stimulated emission, a quantum process, and MRI machines leverage the quantum spin of hydrogen atoms for imaging. Atomic clocks measure time with unprecedented precision using quantum transitions.

Listen to the 'sounds' of the universe with this sonification library, where astronomers have transformed certain astronomical data sets into audio for broader engagement.

Scientists monitor volcanoes with a suitcase-sized observatory called SKATE

Short for Setup for the Kinematic Acquisition of Explosive Eruptions, the device is left to record heat, sound and visual data while volcanologists remain at a safe distance. The $58,000 tool is the successor to the FAMoUS (Fast Multiparametric Setup) prototype.

Through sonoluminescence, concentrated sound waves can produce short, high-intensity flashes of light by rapidly collapsing microscopic bubbles to temperatures up to twice that of the sun's surface.

The construction of LIGO needed to compensate for Earth's curvature

Across the 4-kilometer (2.5-mile) arms, the height of Earth's surface falls by almost a meter, preventing the lasers traveling within the arms from meeting the mirror at the end of each. Concrete slabs built beneath the arms help keep them level and provide structural support against seismic vibrations.