Tectonic earthquakes are caused by tectonic plates sliding past one another at fault zones, deforming rock through friction as energy builds like a stretched rubber band.

The San Andreas Fault is an example of tectonic plates sliding past each other

The transform boundary divides the opposing movements of the Pacific and North American tectonic plates, which create shear zones that distort and fracture rock. These movements produce shallow earthquakes as rocks are gradually displaced hundreds of miles.

Some tectonic plates move faster than their underlying convection currents

Like a chain slipping off a ledge, as tectonic plates sink, their weight can pull the rest of the trailing plate forward, accelerating their movement. Plates can also break apart and fall, creating a suction effect that drives movement, resembling leaves following a passing car.

Although earthquakes cause about 80% of tsunamis, almost all earthquakes lack sufficient energy to cause the sudden shift in the ocean floor needed to substantially displace enormous volumes of water.

Deep-sea trenches form when one tectonic plate subducts another underwater

Oceanic plates sink when colliding with less dense continental plates, bending the seafloor into steep depressions that can be almost 11 kilometers deep. Many of Earth’s strongest earthquakes occur at these plate boundaries, often featuring volcanic activity.

Explosive volcanic eruptions happen when magma pressure overcomes rock strength

Magma usually stays underground because of a balance between its upward pressure, the weight of the Earth’s crust above, and the crust’s rock strength. Landslides can reduce crust weight, while built-up gas pressure can strengthen magmastatic pressure.

Convection flows in Earth’s mantle drive the movement of tectonic plates

These processes transfer heat from Earth’s core to the surface via rising magma plumes, while cooler, denser rock falls into the mantle at rates similar to human fingernail growth. These rates are determined by combining seismic data with computer simulations to model Earth’s interior.

Predicting earthquakes is difficult because different rock types can withstand different amounts of stress before breaking and melt at different temperatures within Earth's interior, introducing uncertainty into predictive models.

Volcanoes 'die' when their supply of magma runs out, if they are shifted away from their underlying magma reservoir, or if they get clogged by collapsing or their magma cooling back into rock.

When oceanic plates sink beneath tectonic ones, they can generate magma

At converging oceanic-continental plate boundaries, the subduction of the oceanic plate introduces seawater that reduces the melting temperature of the overlying mantle. This causes it to melt into less dense magma, which can rise to fuel more volcanic activity.

Earthquakes of identical magnitudes are unlikely to cause equal damage because magnitude only measures energy released, and earthquake severity depends on environmental factors, such as local architecture and geological conditions.

Earth’s major tectonic plates make up 95% of its surface

Tectonic plates are pieces of Earth’s lithosphere, which consists of the crust and the solid, upper layer of the mantle. Segments of major plates can break and form minor or microplates, whose total number varies based on ongoing geological activity.

View maps of seafloor topography, earthquakes, and volcanic activity, which scientists use to create outlines of Earth's tectonic plates.

View a map of the world's major earthquakes from 1956 to 2022, which can be used to identify tectonic plate boundaries.

What makes the Earth shake?

Researchers are demystifying the science of earthquakes—from their origins deep within the Earth to the scales that measure their strength. This article, which was part of a series of weekly reports from Cornell University, serves as a guide to...

Some earthquakes can produce smaller tremors called boomerang earthquakes, which travel in the opposite direction and ripple back to the original earthquake's source.

Some scientists hypothesize that stressed rocks can discharge built-up static electricity in the form of lightning—a phenomenon known as fracto-luminescence, or earthquake lights.

Most volcanic activity occurs in submarine volcanoes on the seafloor

At divergent plate boundaries in mid-ocean ridges, volcanic activity produces new ocean crust as the seafloor spreads. These areas are home to underwater mountains with extensive biodiversity due to redirecting ocean currents and concentrating food for marine life.

Enhanced geothermal power systems can trigger earthquakes by injecting fluid into rock, increasing subterranean pressure.

Scientists determined that tectonic plates moved the ocean floor by observing symmetric patterns of magnetic stripes on opposite sides of underwater volcano systems, which could only result from seafloor spreading.

Slab pull and ridge push contribute to convection-driven oceanic crust movement

Through ridge push, after magma is projected up from the mantle, it cools and sinks, allowing gravity to help push older oceanic crust away. As this crust sinks into the mantle at deep-sea trenches, it pulls on the trailing crust behind it, accelerating ocean crust movement.

The frequency of earthquakes and the distribution of their magnitudes have not changed significantly over long-term records, but technological improvements have enabled scientists to detect more of them as they occur.

The cycling of carbon via tectonic activity may have facilitated life on Earth

Plates sinking into Earth’s mantle pull carbon from the surface, helping stabilize the atmosphere and climate by removing greenhouse gases from volcanic eruptions. At the same time, magma is a significant contributor of heavy metals and other crucial minerals for life to the surface.

Simulate geological activity at plate boundaries using virtual planetary models.

Likened to a car backfiring or a faraway cannon fire, skyquakes have been reported worldwide in Earth's atmosphere without any obvious cause.

View examples of rift valleys, the product of surface divergent boundaries

At these boundaries, tectonic plates move apart, stretching and thinning Earth’s crust as long valleys are formed from smaller, interconnected valleys and troughs. Ongoing rifting and erosion can further sink the valley, becoming a rift lake if volcanic activity becomes inactive.

Ancient sunken plates may influence mantle convection and surface motion

Research suggests sunken tectonic plates can collide, assemble, and break apart to form structures called large low-velocity provinces. LLVPs can significantly enrich rising magma plumes with elements commonly seen on Earth’s surface.

200 million years of tectonic plate movement

The Earth's internal forces have continuously pushed and reshaped how the planet's land masses are arranged. From one supercontinent hundreds of millions of years ago, to present day, the Earth has looked dramatically different throughout the...

Visualize the power and frequency of earthquakes across the moment magnitude scale, where a whole number increase corresponds to about 32 times more energy released.

How the Turkish earthquake created a 100-mile rupture

A February 2023 earthquake devastated parts of Turkey and Syria destroying entire blocks, with more than 50,000 people killed. A scientific analysis revealed a fault line with a 100-mile-long rupture, where separate tectonic plates moved more than...

Explore case studies of each type of convergent plate boundary

At these boundaries, a collision of two oceanic plates produces a curved chain of volcanic islands, like those seen in the Caribbean. A continental-continental plate collision results in plates buckling upward, forming large mountain ranges.

The Ring of Fire, which spans 40,000 kilometers (24,900 miles) around the Pacific Ocean, is the most geologically active region on Earth.

Instead of the tectonic plates found on Earth that produce earthquakes, volcanoes, and other geological activity when they interact, Mercury, Mars, and the moon have continuous, unbroken shells of rock called 'stagnant lids.'

Supervolcanoes can eject enough material to fill one-fourth of the Grand Canyon

Although extremely rare, their released material can trigger winters by blocking the sun and cooling the Earth’s surface for years. The Toba supereruption 74,000 years ago disrupted food chains and reduced the human population to a few thousand.

Mid-ocean ridges are underwater volcano systems where tectonic plates diverge

New ocean crust is formed at these ridges as magma rises from Earth’s mantle and fills the space between the spreading plates. The speed of divergence influences ridge shape, with slow spreads forming rugged valleys and fast spreading creating smooth, wide slopes.

The four types of seismic waves—vibrations that carry energy generated by geological events, such as earthquakes—are categorized as body or surface waves.

Just as light bends at different angles as it travels through different materials, seismic waves move in different directions through Earth's interior, revealing the presence of layers with varying properties.

The composition of magma affects the explosivity of volcanic eruptions

Silicate-rich magma contains extensive molecular chains that trap dissolved gases like water and carbon dioxide. These gases build pressure until they violently escape, creating explosive eruptions. Low-silica magmas produce gentler eruptions categorized as effusive.

Earth's inner structure is a dynamic system of layers in constant, slow motion

From the crust to the core, each of Earth's layers—some solid, some liquid—plays a role in generating its magnetic field, moving tectonic plates, and cycling matter. These details are determined through modeling since humans have only drilled 12 kilometers underground.

Wave tanks can be used to create and study the impacts of tsunamis by building tension in an underwater object before allowing it to slip and rapidly displace water.

If, not when: An earthquake is destined to destroy the Pacific Northwest.

When the Cascadia fault line ruptures, it could be North America’s worst natural disaster in recorded history. Read a deep dive into the history of the region and the potential impact of the eventual seismic boom.

While landslides are associated with the downward flow of unstable terrain, the term encompasses a variety of geological processes, which are distinguished by how the material moves and what materials are involved.

Why starquakes may explain various phenomena associated with neutron stars

Fast radio bursts—repeated millisecond-long pulses of enormous energy from neutron stars—are emitted with a timing that resembles the earthquakes and aftershocks seen on Earth when geological activity releases energy from within the planet. Although pulsars should gradually spin more slowly as they lose energy from emitting jets of radiation, sudden increases may result from interior matter moving during starquakes.

Thunder occurs when fast-flowing electricity heats and pressurizes air, causing it to expand and produce a shockwave at each point along the bolt at multiple frequencies.

Thunderquakes—seismic waves created when lightning strikes the ground—have enabled scientists to image underground environments near Earth's surface by detecting vibrations along subterranean fiber-optic cables.

Eruption forecasting relies on probabilistic methods resembling weather forecasting

While some volcanoes erupt with predictable signs, such as surface deformation from the build-up of underground magma pressure, others release magma at inconsistent rates. Extensive monitoring is needed to identify less clear patterns and indicators of future eruptions.

Dirty lightning is a thunderstorm created from friction between rising and falling flows of ash and smoke during volcanic eruptions.

A tsunami—Japanese for 'harbor wave'—can begin with a drop in sea level before rising, which has contributed to its mistaken categorization as a tidal wave, despite being unrelated to the moon's gravity.

Scientists investigate Earth's interior by studying seismic waves

Scientists investigate Earth's interior by studying seismic wavesBelow Earth's atmosphere lies the crust, which extends to the Mohorovičić discontinuity between five and 20 miles below Earth's surface. Below the crust lies the mantle, the liquid-metal outer core, and the solid inner core, which surpasses 5,200 degrees Celsius (9,392 degrees Fahrenheit).

Human activities release 100 times the carbon dioxide of all volcanic eruptions

While gases released by volcanoes contribute to climate change, humans produce the carbon dioxide equivalent of a Mount St. Helens-sized eruption every 2.5 hours, or more than one Yellowstone eruption yearly, even though such supervolcanoes only erupt about every 100,000 to 200,000 years or more.

Sinkholes form when underground cavities cause the surface above to collapse

These openings are typically carved by acidic water, which often forms in limestone-rich areas. However, leaking pipes, groundwater removal and extreme weather or geological activity increases the frequency of sinkhole appearances.