Predicting earthquakes is difficult because different rock types can withstand different amounts of stress before breaking and melt at different temperatures within Earth's interior, introducing uncertainty into predictive models.

Convection flows in Earth’s mantle drive the movement of tectonic plates

These processes transfer heat from Earth’s core to the surface via rising magma plumes, while cooler, denser rock falls into the mantle at rates similar to human fingernail growth. These rates are determined by combining seismic data with computer simulations to model Earth’s interior.

Tectonic earthquakes are caused by tectonic plates sliding past one another at fault zones, deforming rock through friction as energy builds like a stretched rubber band.

Eruption forecasting relies on probabilistic methods resembling weather forecasting

While some volcanoes erupt with predictable signs, such as surface deformation from the build-up of underground magma pressure, others release magma at inconsistent rates. Extensive monitoring is needed to identify less clear patterns and indicators of future eruptions.

Scientists investigate Earth's interior by studying seismic waves

Scientists investigate Earth's interior by studying seismic wavesBelow Earth's atmosphere lies the crust, which extends to the Mohorovičić discontinuity between five and 20 miles below Earth's surface. Below the crust lies the mantle, the liquid-metal outer core, and the solid inner core, which surpasses 5,200 degrees Celsius (9,392 degrees Fahrenheit).

Earth's inner structure is a dynamic system of layers in constant, slow motion

From the crust to the core, each of Earth's layers—some solid, some liquid—plays a role in generating its magnetic field, moving tectonic plates, and cycling matter. These details are determined through modeling since humans have only drilled 12 kilometers underground.

Earthquakes of identical magnitudes are unlikely to cause equal damage because magnitude only measures energy released, and earthquake severity depends on environmental factors, such as local architecture and geological conditions.

Explosive volcanic eruptions happen when magma pressure overcomes rock strength

Magma usually stays underground because of a balance between its upward pressure, the weight of the Earth’s crust above, and the crust’s rock strength. Landslides can reduce crust weight, while built-up gas pressure can strengthen magmastatic pressure.

How we know what's deep inside the Earth, despite never traveling there

We'll likely never see the Earth's core, but we can make educated guesses about what it's like down there. Nearly as hot as the sun's surface and under impossibly high pressure, the inner Earths extreme conditions make it impossible to explore. Yet, seismic waves during earthquakes, volcanic eruptions, and light waves from the sun provide fascinating insights about our planet's mantle, crust, and core.

The frequency of earthquakes and the distribution of their magnitudes have not changed significantly over long-term records, but technological improvements have enabled scientists to detect more of them as they occur.

Simulate geological activity at plate boundaries using virtual planetary models.

View maps of seafloor topography, earthquakes, and volcanic activity, which scientists use to create outlines of Earth's tectonic plates.

Scientists determined that tectonic plates moved the ocean floor by observing symmetric patterns of magnetic stripes on opposite sides of underwater volcano systems, which could only result from seafloor spreading.

What makes the Earth shake?

Researchers are demystifying the science of earthquakes—from their origins deep within the Earth to the scales that measure their strength. This article, which was part of a series of weekly reports from Cornell University, serves as a guide to...

Reported earthquake magnitudes often change because initial values are based on limited information, whereas revised magnitudes account for factors such as fault size, rupture duration, and seismic wave behavior.

Rather than predicting them in advance, earthquake early warning systems detect tremors moments after they begin and send notifications that reach users before the seismic activity does.

Just as light bends at different angles as it travels through different materials, seismic waves move in different directions through Earth's interior, revealing the presence of layers with varying properties.

Volcanoes 'die' when their supply of magma runs out, if they are shifted away from their underlying magma reservoir, or if they get clogged by collapsing or their magma cooling back into rock.

Enhanced geothermal power systems can trigger earthquakes by injecting fluid into rock, increasing subterranean pressure.

Some tectonic plates move faster than their underlying convection currents

Like a chain slipping off a ledge, as tectonic plates sink, their weight can pull the rest of the trailing plate forward, accelerating their movement. Plates can also break apart and fall, creating a suction effect that drives movement, resembling leaves following a passing car.

Although earthquakes cause about 80% of tsunamis, almost all earthquakes lack sufficient energy to cause the sudden shift in the ocean floor needed to substantially displace enormous volumes of water.

View a map of the world's major earthquakes from 1956 to 2022, which can be used to identify tectonic plate boundaries.

200 million years of tectonic plate movement

The Earth's internal forces have continuously pushed and reshaped how the planet's land masses are arranged. From one supercontinent hundreds of millions of years ago, to present day, the Earth has looked dramatically different throughout the...

The San Andreas Fault is an example of tectonic plates sliding past each other

The transform boundary divides the opposing movements of the Pacific and North American tectonic plates, which create shear zones that distort and fracture rock. These movements produce shallow earthquakes as rocks are gradually displaced hundreds of miles.

Instead of the tectonic plates found on Earth that produce earthquakes, volcanoes, and other geological activity when they interact, Mercury, Mars, and the moon have continuous, unbroken shells of rock called 'stagnant lids.'

Some earthquakes can produce smaller tremors called boomerang earthquakes, which travel in the opposite direction and ripple back to the original earthquake's source.

Earth’s major tectonic plates make up 95% of its surface

Tectonic plates are pieces of Earth’s lithosphere, which consists of the crust and the solid, upper layer of the mantle. Segments of major plates can break and form minor or microplates, whose total number varies based on ongoing geological activity.

Scientists can map Earth's shape and structure by measuring the ratios of certain particles arriving from different directions in space, as these ratios change with the density of the material particles travel through.

Records of Earth's magnetic field on the seafloor validated plate tectonics

Matching glacial, fossil, and rock records, mountain ranges, and continental shapes across oceans was insufficient evidence for continental drift. Precise measurements of magnetic minerals on the ocean floor revealed seafloor spreading, which could only be explained by moving landmasses.

Deep-sea trenches form when one tectonic plate subducts another underwater

Oceanic plates sink when colliding with less dense continental plates, bending the seafloor into steep depressions that can be almost 11 kilometers deep. Many of Earth’s strongest earthquakes occur at these plate boundaries, often featuring volcanic activity.

Some scientists hypothesize that stressed rocks can discharge built-up static electricity in the form of lightning—a phenomenon known as fracto-luminescence, or earthquake lights.

Scientists determine earthquake locations by comparing how long it takes different seismic waves to be detected at three stations around the world, from which an origin, or hypocenter, can be triangulated.

Heat slowly moves through Earth's mantle like softened wax

Energy trapped during Earth's formation and released via the radioactivity of elements is carried by convection currents towards the surface, while cooler, denser material sinks. The planet's core is almost as hot as the sun's surface.

Ancient sunken plates may influence mantle convection and surface motion

Research suggests sunken tectonic plates can collide, assemble, and break apart to form structures called large low-velocity provinces. LLVPs can significantly enrich rising magma plumes with elements commonly seen on Earth’s surface.

Scientists define sea level as the elevation to which water would settle on Earth's surface, given the planet's gravitational field and rotation.

Magnetic material in rocks provides evidence of flips in Earth's magnetic field

Volcanic rocks can lock in the direction of Earth's magnetic field as they cool, making them natural recorders of magnetism. Dating rocks and seeing the changing orientation of their magnetic field helps construct a timeline of Earth's magnetic field history.

Slab pull and ridge push contribute to convection-driven oceanic crust movement

Through ridge push, after magma is projected up from the mantle, it cools and sinks, allowing gravity to help push older oceanic crust away. As this crust sinks into the mantle at deep-sea trenches, it pulls on the trailing crust behind it, accelerating ocean crust movement.

Visualize the power and frequency of earthquakes across the moment magnitude scale, where a whole number increase corresponds to about 32 times more energy released.

Climate models use complex equations and supercomputers to predict future climate

The equations apply the laws of thermodynamics, fluid motion, and radiative transfer to a 3D grid along Earth's surface. After solving them for each cell in the grid over a time interval, the results carry over to neighboring cells, and the process repeats into the future.

Cooling lava naturally creates hexagonal cracks to evenly relieve stress

When lava cools and turns into rock, it contracts and builds up tension, particularly when held in place by the surrounding landscape. Just as drying mud cracks, initial cracks in the rock are random, but quickly organize into a hexagonal pattern, which scientists consider the most space-efficient shape.

When oceanic plates sink beneath tectonic ones, they can generate magma

At converging oceanic-continental plate boundaries, the subduction of the oceanic plate introduces seawater that reduces the melting temperature of the overlying mantle. This causes it to melt into less dense magma, which can rise to fuel more volcanic activity.

View the past month of earthquakes worldwide with this digital globe, which displays data from the US Geological Survey.

Geological tremors on the moon provide evidence that it is shrinking

Apollo seismometers have collected moonquake data, which scientists have analyzed to map the moon's interior and reveal that fault slips producing tremors are the result of sublunar cooling and contraction. It also revealed that the moon's inner core is about 500 kilometers (311 miles) across.

Why starquakes may explain various phenomena associated with neutron stars

Fast radio bursts—repeated millisecond-long pulses of enormous energy from neutron stars—are emitted with a timing that resembles the earthquakes and aftershocks seen on Earth when geological activity releases energy from within the planet. Although pulsars should gradually spin more slowly as they lose energy from emitting jets of radiation, sudden increases may result from interior matter moving during starquakes.

The theory of plate tectonics was not initially accepted until evidence became undeniable

Alfred Wegener proposed continental drift—the movement of large landmasses—in 1912 to explain why similar rock layers, plant and animal fossils, and glacial deposits were found on continents that were then unconnected. In the early 1960s, this was combined with evidence of seafloor spreading, mantle convection in Earth's interior, and earthquake and volcanic data outlining plate boundaries to produce the accepted theory.

Earth's core is leaking precious metals, including gold

Earth's core, containing 99.999% of all known gold, is leaking trace amounts of precious metals into the mantle. Advanced isotopic methods have detected this leakage at volcanoes in Hawai'i, providing new insights into the movement of material beneath Earth's surface.

Accurate climate models incorporate calculus to account for complex feedback loops

The simplest models assume uniformity across the Earth, with incoming energy from the sun being offset by the planet's albedo, or reflectiveness, which prevents the radiation from being fully absorbed. Incorporating elements such as atmospheric layers, latitude bands, geographic variability, and emissivity yields coupled differential equations quantifying Earth's interconnected systems.

The cycling of carbon via tectonic activity may have facilitated life on Earth

Plates sinking into Earth’s mantle pull carbon from the surface, helping stabilize the atmosphere and climate by removing greenhouse gases from volcanic eruptions. At the same time, magma is a significant contributor of heavy metals and other crucial minerals for life to the surface.

The composition of magma affects the explosivity of volcanic eruptions

Silicate-rich magma contains extensive molecular chains that trap dissolved gases like water and carbon dioxide. These gases build pressure until they violently escape, creating explosive eruptions. Low-silica magmas produce gentler eruptions categorized as effusive.

Because the Richter scale was calibrated to crustal and mantle properties in Southern California, seismologists have instead used the moment magnitude scale to quantify earthquakes since the 1970s.

The Ring of Fire, which spans 40,000 kilometers (24,900 miles) around the Pacific Ocean, is the most geologically active region on Earth.