In nuclear reactors, water acts as a coolant and moderator, slowing neutrons produced in nuclear reactions so they are more likely to interact with nuclear fuel and generate sustainable energy.

While both are nuclear weapons, atomic bombs release nuclear energy by splitting large atomic nuclei, whereas hydrogen bombs derive most of their energy from fusing heavy hydrogen isotopes.

The oldest nuclear fission reactor on Earth formed naturally in West Africa about 2 billion years ago, where groundwater enabled atoms in uranium deposits to split, releasing energy.

Visualize what happens to atoms during nuclear fission and how the process produces energy

Nuclear fission occurs when an unstable, often massive, atomic nucleus splits into smaller ones—daughter atoms—and releases energy. Within a nuclear reactor, these daughter atoms can collide and combine with neighboring atoms, destabilizing them and triggering a chain reaction of atomic splitting.

Uranium's ability to split easily makes it the most common catalyst for nuclear power

Uranium is commonly found in rocks, water, and soil worldwide, but significant industrial processes are needed to process and enrich it for efficient reactor usage. After being irradiated in reactors, it must be cooled down before disposal.

Nuclear fusion, where the nuclei of two atoms are combined, can produce near-limitless clean energy, but requires extreme conditions to kickstart because of the natural repulsion of atomic nuclei.

Methods for disposing of nuclear waste include melting it into a liquid to create glass, dumping it into graphite blocks, storing it in lead-lined rooms, and submerging it in deep pools of water.

A nuclear reactor's characteristic blue light is produced from superluminal particles

When light travels through water, its effective speed is 25% lower than its speed in a vacuum. Just as sound waves bunch up and produce a sonic boom when objects move faster than the speed of sound, particles moving faster than this reduced speed generate a shock wave of light, visible as a blue hue.

The first nuclear reactor was built three years after nuclear fission was discovered

After learning that large atomic nuclei release energy upon being split apart, scientists quickly researched how to control the reaction to make electricity. Fusion—combining small atomic nuclei—generates massive energy in stars and hydrogen bombs.

Nuclear power relies on chain reactions involving uranium-235, but because the isotope's concentration in natural ores is too low to sustain these reactions, enrichment is needed to produce more highly concentrated fuel.

Over a lifetime, the average American's nuclear power usage creates a hockey puck of nuclear waste

Spent nuclear fuel remains hot and highly radioactive for long periods, requiring submersion in cooling pools before being stored in dry casks and deep underground repositories. The potential recycling of nuclear waste is impeded by security concerns and dangerous reprocessing methods, particularly when obtaining fresh uranium is often easier.

Watch a visualization of a fission chain reaction

When a neutron collides with an atom, it is absorbed into the nucleus. If the resulting nucleus is unstable, it can undergo a series of decays that turn it into a less massive nucleus while releasing energy and other particles.

Since 2026, the Large Hadron Collider has provided heat to thousands of French homes and businesses through a system that harnesses hot water from the accelerator's cooling circuits.

Nuclear-powered missiles replace chemical combustion with energy from nuclear fission

In these systems, energy is added to an airstream, which passes through a nozzle to generate thrust. Because the amount of energy released per unit mass of nuclear fuel is millions of times larger than that of chemical propellants, nuclear missiles can travel faster and farther with less fuel.

Some geothermal power plants make electricity using a secondary fluid

Direct dry-steam systems pull underground steam into a turbine-generator system, while flash and double-flash cycle systems spray extracted liquid water into a low-pressure tank, causing it to rapidly vaporize—"flash"—before moving to the turbine. Binary cycle systems use the extracted steam and water to flash a second fluid that easily boils, which then drives the turbine.

Visualizing the chemistry of nuclear weapons

Nuclear weapons have devastating effects, but the science of how they work is atomically small. There are two main types of nuclear reaction: fission and fusion. The fission bomb produces immense energy by splitting an atom, the result of firing a...

Nuclear batteries generate electrical currents using radioactive materials

Rather than using electrochemical reactions to produce the electrons that flow through a circuit, isotopes like nickel-63 undergo beta decay—emitting electrons—which a semiconducting material can absorb to establish a charge imbalance that generates current. Such batteries could provide low-power energy for decades.

Microreactors are 100 to 1,000 times smaller than traditional nuclear reactors but still generate thermal energy for heating or electricity by splitting atomic nuclei.

The continuous decay of radioactive elements regenerates geothermal energy reserves

Geothermal power is a renewable energy source derived from Earth's interior, where the core reaches temperatures exceeding 5,000 degrees Celsius (9,000 degrees Fahrenheit). These temperatures result from leftover energy from collisions during planetary formation, with radioactive decay in the core releasing additional energy that travels to the surface.

Geothermal power plants can provide large-scale energy storage for other systems

These facilities can store excess energy from solar and wind power as hot water or steam, which can be used to run turbines to generate electricity when other renewable energy sources are unavailable. Simulations have found efficiencies of 90% during a storage-use cycle, making it comparable to lithium-ion batteries.

Hydrogen fuel cells, which combine hydrogen and oxygen to generate electricity and water, can be run in reverse to produce hydrogen fuel from water.

Unlike solar panels, which convert sunlight directly into electricity, concentrated solar power systems focus sunlight to heat a material that boils water, which then drives a turbine-generator to produce electricity.

See where the 94 nuclear reactors in the continental US are located

In 2023, these reactors—located in 53 plants across 28 states—prevented 437 million tons of carbon dioxide emissions. A single fingertip-sized uranium pellet generates as much electricity as a ton of coal, enough for one household's annual electricity.

As of 2024, there are 90,000 tons of nuclear waste stored at 100+ sites in 39 states

Over 315,000 bundles of spent nuclear fuel rods are stored in water pools and over 3,800 dry storage casks in concrete vaults above ground. Corrosion from saltwater spray threatens waste containers of reactors near oceans.

Geothermal power can generate electricity and provide direct heating for homes

By drilling several kilometers through penetrable rock, wells can access highly pressurized groundwater warmed by thermal energy trapped beneath Earth's surface. This water can be turned into steam to create electricity in generators. Heating systems several meters deep can pump fluid underground before circulating it through buildings.

An imbalance in nuclear reactivity factors caused Chernobyl's reactor to explode

The initial explosion resulted from excessive steam pressure that had built up in a runaway manner due to design flaws and violations of safety protocols. Once exposed to atmospheric oxygen, the hot graphite in the control rods underwent a combustion reaction, resulting in a secondary explosion.

Some renewable energy sources may weaken the resiliency of electric grids by removing outage buffers provided by coal- and natural gas-fired plants, which provide the system with more time to find a new power source if a plant goes down.

What fuels the sun?

The sun is our biggest source of heat and light, but how does this massive powerhouse continue to produce such amazing energy? Basically, it's a fusion reactor. At its core the sun produces all that solar energy through hydrogen fusing and converting into helium, over and over again. Learn more about the entire amazing and explosive process here.

Nuclear power supplies almost half of US carbon-free energy

As of 2023, nearly 20% of US electricity comes from nuclear power, but most reactors were built from 1971 to 1990. Expansion slowed due to safety concerns, high costs, and competition from natural gas.

Small modular reactors can provide nuclear power with reduced risks and logistics

Their factory-built design allows them to be quickly installed underground, reducing their exposure to future extreme weather. They can provide power to small towns and major cities with much smaller start-up costs and reduced siting requirements.

When users prompt AI chatbots, both cooling systems that support data centers and power plants that rely on steam cycles to generate electricity for data centers contribute to water use.

How the nuclear shell model explains the stability or radioactivity of atomic nuclei

When the number of protons and neutrons completely fills shells within the nucleus, the binding energy that prevents these particles from being pulled apart increases. These are called "magic numbers," and they produce atoms with exceptionally stable nuclear configurations.

Fusion reactions and radioactive decay produce elements inside stars

Hydrogen, present since the early universe, serves as fuel for the proton-proton chain, producing helium, which is then incorporated into the CNO cycle to produce carbon, nitrogen, and oxygen. Additional fusions of helium with these elements and subsequent decays via the alpha ladder produce elements up to iron and bismuth.

Helium formation, from radioactive decay inside Earth to nuclear fusion within stellar cores

Over the course of billions of years, uranium and thorium undergo alpha decay, producing helium nuclei—two protons and two neutrons—which become helium atoms after gaining two electrons. This helium becomes trapped in underground reservoirs along with other gases and can be recovered during natural gas extraction.

In osmotic power systems, the natural movement of water from regions of low to high salt concentration is used to generate electricity from pressurized water.

Build atomic nuclei to explore their instability and resulting radioactive decay

In this simulation, users can add protons and neutrons to create an atomic nucleus, view its half-life and decay options, and identify patterns in how specific combinations of particles create extremely stable nuclei, from which the nuclear shell model of stability emerged.

Turning nuclear waste into cancer medications

This video explores Terrapower, a company transforming nuclear waste into lifesaving cancer treatments. This is accomplished through the production and use of Actinium 225, a rare isotope derived from thorium, which is used in targeted alpha therapy to treat cancer.

Watch a server submerged in a fluid continue to run and stay cool by boiling the liquid away.

An overview of radioactivity, which can spontaneously change one element into another

Unstable atomic nuclei can transmute into a new element—an atom with a different number of protons—by emitting an alpha particle (two protons and two neutrons) or a beta particle (an electron). The electron can emerge from the nucleus when a neutron, which has no charge, suddenly transforms into a proton and an electron, thereby maintaining zero charge before and after the transformation, but altering the original element.

An explanation of the weak nuclear force, which can induce some forms of radioactive decay

While the strong nuclear force holds the protons and neutrons together in an atomic nucleus, despite the electromagnetic force pushing protons apart, the weak nuclear force can change the identity, or flavor, of the quarks that make up these particles. In doing so, protons can be converted into neutrons, and vice versa, altering the stability of atomic nuclei.

Heat pumps use an easily boilable chemical to regulate temperature

In air conditioners, warm air is pulled from a home to turn a refrigerant into a gas, which is then compressed, raising its temperature. The gas naturally releases this energy to the comparatively cooler environment when exposed, then expands and is reused in the system. Heaters run in reverse, with the refrigerant picking up energy from the comparatively warmer environment.

The formation of a neutron star through a core collapse lasts one-tenth of a second

Massive stars keep fusing heavier and heavier elements in their cores to produce energy that pushes against the weight of the star itself. However, the fusion of silicon into iron consumes energy and initiates a feedback loop that rapidly compresses the stellar core, creating neutrons and neutrinos from the combination of electrons and protons.

Chernobyl's remaining reactors kept running for 14 years after the explosion

Due to energy shortages in Ukraine, Chernobyl's other undamaged reactors continued operating for years. Units 1 and 2 operated until 1996 and 1991, respectively, while Reactor 3 remained online until December 15, 2000, when Ukraine finally shut down the plant.

Less common types of radioactive decay include emitting neutrons and antimatter

Through neutron emission, one or more neutrons are ejected from atoms that have far fewer protons. Neutrons can also be released by artificially inducing the fission, or separation, of a large atomic nucleus into smaller ones. During beta-plus decay, a positron—the antimatter version of an electron—is produced when a proton turns into a neutron.

Pure water does not conduct electricity because this flow of energy requires the movement of charged particles, and water is a neutral molecule.

View a list of the worst nuclear meltdowns before 2013

Nuclear meltdowns occur when a reactor overheats and radioactive materials leach into the surrounding environment. While rare, the reasons for each occurrence—as detailed in this piece—can help establish new safety protocols for future reactors.

A beam of neutrinos can be created by firing a beam of high-energy protons at a target to produce unstable particles that decay into neutrinos.

Although PFAS, or forever chemicals, are intentionally designed to be extremely stable and long-lasting because of their strong carbon-fluorine bonds, these bonds can be broken by heat, plasma, and supercritical water.

Manage the control room of a virtual nuclear power plant

This interactive takes you on a tour of a virtual plant before handing you the keys to the control room. Challenge yourself to produce enough energy to meet demand while avoiding a nuclear meltdown.

Isodope is the world's first nuclear energy influencer

Isabelle Boemeke, a Brazilian fashion model and social media personality, began promoting the benefits of nuclear electricity in 2015. She now debunks common objections to it through her TikTok persona Isodope—which has more than 34,000 followers.

Heat slowly moves through Earth's mantle like softened wax

Energy trapped during Earth's formation and released via the radioactivity of elements is carried by convection currents towards the surface, while cooler, denser material sinks. The planet's core is almost as hot as the sun's surface.