Heat pumps use an easily boilable chemical to regulate temperature

Some geothermal power plants make electricity using a secondary fluid

Direct dry-steam systems pull underground steam into a turbine-generator system, while flash and double-flash cycle systems spray extracted liquid water into a low-pressure tank, causing it to rapidly vaporize—"flash"—before moving to the turbine. Binary cycle systems use the extracted steam and water to flash a second fluid that easily boils, which then drives the turbine.

Geothermal heat pumps have the greatest upfront cost of any home heating system

As of 2025, installations of these systems can range from $15,000 to over $40,000, significantly more than for furnace-air conditioner and air-source heat pump systems. However, they are up to 50% more efficient than these alternative systems, making them able to pay for themselves within 15 years.

Our bodies cool us down by sweating because water requires a significant amount of energy to change state from liquid to gas, making it an ideal medium for carrying thermal energy away from our bodies.

Aquifer thermal energy storage systems bank water heated during the summer in aquifers—layers of porous rock, gravel, and sand filled with groundwater—which are then collected in winter to warm homes.

Geothermal power can generate electricity and provide direct heating for homes

By drilling several kilometers through penetrable rock, wells can access highly pressurized groundwater warmed by thermal energy trapped beneath Earth's surface. This water can be turned into steam to create electricity in generators. Heating systems several meters deep can pump fluid underground before circulating it through buildings.

Watch a server submerged in a fluid continue to run and stay cool by boiling the liquid away.

Data centers require interconnected server- and building-level cooling systems

Computer equipment can be cooled by circulating cold air or water through the equipment racks, siphoning the heated fluid into a heat exchanger. This exchanger transfers thermal energy to building cooling systems, which can dispose of the heat by evaporative cooling—the way humans cool off by sweating—or via air conditioning.

Geothermal power plants can provide large-scale energy storage for other systems

These facilities can store excess energy from solar and wind power as hot water or steam, which can be used to run turbines to generate electricity when other renewable energy sources are unavailable. Simulations have found efficiencies of 90% during a storage-use cycle, making it comparable to lithium-ion batteries.

Water vapor is used to manage heat in high-end smartphones

While smartphones have traditionally been cooled using a highly conductive plate that dissipates heat from the chip, vapor chambers offer a higher heat-removal capacity. This technology has been utilized in laptops for decades to absorb heat by cycling a fluid between liquid and gaseous phases.

Geothermal power can be used beyond heating and energy production

Depending on the depth of the natural vents or artificial wells drilled, the surrounding fluid temperature will vary greatly—from 10 to 371 degrees Celsius (50 to 700 degrees Fahrenheit)—allowing for various applications, including the drying of cement, concrete, and lumber, as well as the processing of pulp and paper.

Since 2026, the Large Hadron Collider has provided heat to thousands of French homes and businesses through a system that harnesses hot water from the accelerator's cooling circuits.

Sand 'batteries' can store excess electricity from the power grid as thermal energy

Energy collected from solar or wind power is used to heat insulated silos full of sand to temperatures as high as 450 degrees Celsius (842 degrees Fahrenheit), which can be retained for long periods. These thermal energy storage systems can be designed to boil water and generate electricity when needed.

13 unconventional ways to stay cool during heat waves

While air conditioning is the default solution for many in a heat wave, it can get expensive while requiring the consumption of fossil fuel energy. So, how else can you stay cool during a heat wave? This list compiles some practical, at times quirky, suggestions, including an ice-pack-filled aubergine hat.

Fracking technology can help make geothermal power possible almost everywhere

Generating electricity from Earth's thermal energy has previously required existing underground reservoirs of hot water and permeable rocks through which the fluid naturally escapes. Today, fractures can be artificially created to form fluid pathways, and surface water can be injected underground and brought back to the surface.

The history of many kitchen appliances involves unexpected discoveries and applications, including wartime radar turned hamster defroster and replacing an 'ice king' with heat-stealing boxes.

In nuclear reactors, water acts as a coolant and moderator, slowing neutrons produced in nuclear reactions so they are more likely to interact with nuclear fuel and generate sustainable energy.

The properties of helium, which has the lowest boiling point of any element

The colorless, odorless, mainly unreactive element condenses from a gas into a liquid at -268.928 degrees Celsius (-452.07 degrees Fahrenheit)—near the lowest theoretically possible temperature—allowing it to serve as a liquid coolant in machines without the risk of causing damage as a solid.

Differences in pressure and temperature between atmospheric gases create wind

Because Earth's surface is not uniformly heated by the sun at all times, pockets of warmer and cooler air will form and interact. Warmer pockets of less dense air will rise, leaving gaps for cooler, denser air to move in. Wind is this movement of air from high-pressure to low-pressure areas.

The industrial methods for recovering helium, including filters and cryogenic separation

Membranes with microscopic pores of varying sizes can be used to selectively filter out components of natural gas, including helium, which can then be concentrated. Because helium requires the lowest temperature of all elements to condense into a liquid, extracted natural gas can also be cooled until only helium remains as a gas.

The Arctic warms more quickly than the rest of the planet because of the loss of surface ice, a lack of vertical air circulation, and the release of thermal energy as water vapor condenses.

Data centers can be kept cool by circulating fluid over plates atop high-temperature components or by submerging equipment in non-corrosive oil that does not conduct electricity.

Hydrogen fuel cells, which combine hydrogen and oxygen to generate electricity and water, can be run in reverse to produce hydrogen fuel from water.

Health workers may cool body temperatures with convection cooling

That's spraying a patient with water and putting fans over them. Cooling the body by removing clothing and placing cold water and ice packs—and not blocking evaporation—are essential cooling steps.

The boiling temperature of water decreases with increasing elevation because the molecules need less energy to overcome the lower atmospheric pressure associated with thinner air.

Cooling each square foot of a room requires at least 20 BTUs of capacity

British thermal units describe the cooling capacity of air conditioners, though noise levels, directional airflow, and filtration also affect their effectiveness. Insufficient BTUs are unlikely to cool a large enough room faster than the environment warms the air.

Wastewater from geothermal power plants helps melt sidewalk snow in Iceland

Located on the Mid-Atlantic ridge, where the North American and Eurasian tectonic plates move apart, the nation saw geothermal power meet more than 90% of its heating demand in 2024. After the hot water produced by these plants is used to heat homes and businesses, it is transferred through small pipes beneath Reykjavík's sidewalks.

Unlike solar panels, which convert sunlight directly into electricity, concentrated solar power systems focus sunlight to heat a material that boils water, which then drives a turbine-generator to produce electricity.

Broken or neglected air conditioners are risky for respiratory health

A well-maintained air conditioner can typically keep out unwanted pathogens, but units that are dusty or water-logged can foster germs and cause harm. AC units also remove moisture from the air, potentially causing mucus membranes to dry out and become vulnerable to infection.

Bath bombs can produce endothermic reactions that cool water

In bath bombs containing citric acid and sodium bicarbonate, water facilitates the reaction between the bicarbonate and acid, providing energy as the salt dissolves. The loss of energy in the water reduces the average speed of the water molecules, reducing the temperature of the bath.

Desalination involves costly, energy-intensive methods for producing freshwater

Thermal desalination heats saltwater to produce steam, and reverse osmosis forces saltwater through a membrane that only allows water through. In both cases, freshwater is collected and remineralized for consumption, while wastewater brine is often returned to the ocean, where it may harm marine organisms.

If two strands of conducting materials are connected at two junctions, electricity can be generated if one junction is heated while the other is cooled—a phenomenon known as the Seebeck effect.

Thermodynamics makes building data centers in space to cool equipment impractical

Rather than cooling via interactions with flowing cold air or water, data centers in space would dissipate energy primarily by radiation, in which an object at any temperature above absolute zero emits light. This method is much less efficient at cooling and would require hyperscale data centers to have radiator panels thousands of times larger than those on the International Space Station.

Watch a demonstration of the greenhouse effect with carbon dioxide, where thermal energy is trapped by the gas within a container, causing the temperature to increase.

A basement of mechanical systems—collectively called the technosphere—supports B2

Twenty-six underground air handlers heat, cool, filter and manage the humidity of the air across the biomes of Biosphere 2. The above-ground Energy Center complex provides continuous power to these and other systems, including heating and cooling water for laboratory experiments and personal use.

Enhanced geothermal power systems can trigger earthquakes by injecting fluid into rock, increasing subterranean pressure.

The continuous decay of radioactive elements regenerates geothermal energy reserves

Geothermal power is a renewable energy source derived from Earth's interior, where the core reaches temperatures exceeding 5,000 degrees Celsius (9,000 degrees Fahrenheit). These temperatures result from leftover energy from collisions during planetary formation, with radioactive decay in the core releasing additional energy that travels to the surface.

Visualize how alternating currents—electricity that periodically changes direction—are generated by rotating magnetic fields, as occurs in turbine-generator systems.

Internal-combustion engines convert fuel into motion using controlled explosions

Gasoline engines mix fuel and air, compressing it and igniting it to create thousands of tiny explosions that push pistons up and down. This movement spins the crankshaft, which moves a vehicle's wheels.

A look at hydrothermal vents, where barophiles and hyperthermophiles survive boiling water

Discovered in 1977 during an exploration of the Galapagos Rift, these seafloor openings spew hot magma and chemicals that heat seawater to hundreds of degrees. Without the sunlight found at depths of less than 1,000 meters (3,281 feet), extremophiles in these environments convert released chemicals into energy to survive, alongside surviving extreme pressures.

Fluorinated molecules are the most impactful, longest-lasting greenhouse gases

Developed as replacements for ozone-depleting substances in refrigeration and air conditioning systems, these compounds are released through leaks in and ongoing use of these appliances, as well as from various industrial processes. They can remain in the atmosphere for thousands of years and have warming potentials that are a thousand to tens of thousands of times greater than those of carbon dioxide.

Humans have used geothermal resources for thousands of years

In North America, Indigenous peoples viewed hot springs as sacred places and used them for medicinal purposes, cooking, and surviving cold weather. The ancient Greeks and Romans also viewed them as sacred, partaking in hot mineral baths to relieve ailments and using them for space heating.

In osmotic power systems, the natural movement of water from regions of low to high salt concentration is used to generate electricity from pressurized water.

By absorbing 90% of the thermal energy trapped by greenhouse gases, oceans are providing increasingly more energy to power the rapid strengthening of hurricanes.

Some materials can absorb low-energy light and emit high-energy radiation

Through anti-Stokes cooling, incoming energy is combined with vibrations in a material's crystal lattice to produce a net reduction in its temperature. Using this effect, lasers can be directed at microchip hot spots to help keep data centers cool.

A breakdown of Earth's atmospheric layers, including why it can get colder or hotter with altitude

Gases in the troposphere—the atmosphere's lowest layer—cool with increasing height as they get farther from the thermal energy emitted by Earth's warm surface. In the next layer—the stratosphere—ozone is increasingly heated by the sun's ultraviolet radiation with height. Because cooler air sinks and hotter air rises, the cooler troposphere and hotter stratosphere form a natural boundary keeping Earth's weather in the lowest layer.

When users prompt AI chatbots, both cooling systems that support data centers and power plants that rely on steam cycles to generate electricity for data centers contribute to water use.

Explaining the Leidenfrost effect, where water can hover and move against gravity

Water droplets can glide across surfaces whose temperatures are well above water's boiling point. This heat instantly vaporizes the bottom of the droplet, creating a layer of steam that the rest of the droplet rides and bounces upon. This can be seen when sprinkling water on skillets to determine if the surface is hot enough to cook on.

Home energy performance can be boosted through home orientation and shading

When designing a home, placing living areas to the north maximizes sun exposure during winter, while eaves and awnings can limit excessive summer heat. Breezeways and entry air locks can also reduce the dependence on heating and cooling costs.

What is a heat dome?

The world is seeing regular heat waves with multiple causes, including so-called "heat domes," a term rising in use in recent years. A heat dome occurs when the atmosphere traps hot ocean air like a lid or cap, creating stifling conditions and resulting in extended periods of heat. See an illustration of this phenomenon and read how it works with this brief explainer.

The warmest waters in the ocean are found at hydrothermal vents—hot springs on the seafloor that discharge plumes of mineral-rich water.