Nuclear power relies on chain reactions involving uranium-235, but because the isotope's concentration in natural ores is too low to sustain these reactions, enrichment is needed to produce more highly concentrated fuel.

Uranium's ability to split easily makes it the most common catalyst for nuclear power

Uranium is commonly found in rocks, water, and soil worldwide, but significant industrial processes are needed to process and enrich it for efficient reactor usage. After being irradiated in reactors, it must be cooled down before disposal.

HALEU, or High-Assay Low-Enriched Uranium, is a next-generation nuclear fuel with higher energy density—three tablespoons of it are enough to supply the average person's electricity use for their entire lifetime.

Nuclear fusion, where the nuclei of two atoms are combined, can produce near-limitless clean energy, but requires extreme conditions to kickstart because of the natural repulsion of atomic nuclei.

In nuclear reactors, water acts as a coolant and moderator, slowing neutrons produced in nuclear reactions so they are more likely to interact with nuclear fuel and generate sustainable energy.

The oldest nuclear fission reactor on Earth formed naturally in West Africa about 2 billion years ago, where groundwater enabled atoms in uranium deposits to split, releasing energy.

While both are nuclear weapons, atomic bombs release nuclear energy by splitting large atomic nuclei, whereas hydrogen bombs derive most of their energy from fusing heavy hydrogen isotopes.

Over a lifetime, the average American's nuclear power usage creates a hockey puck of nuclear waste

Spent nuclear fuel remains hot and highly radioactive for long periods, requiring submersion in cooling pools before being stored in dry casks and deep underground repositories. The potential recycling of nuclear waste is impeded by security concerns and dangerous reprocessing methods, particularly when obtaining fresh uranium is often easier.

See where the 94 nuclear reactors in the continental US are located

In 2023, these reactors—located in 53 plants across 28 states—prevented 437 million tons of carbon dioxide emissions. A single fingertip-sized uranium pellet generates as much electricity as a ton of coal, enough for one household's annual electricity.

Fusion reactions and radioactive decay produce elements inside stars

Hydrogen, present since the early universe, serves as fuel for the proton-proton chain, producing helium, which is then incorporated into the CNO cycle to produce carbon, nitrogen, and oxygen. Additional fusions of helium with these elements and subsequent decays via the alpha ladder produce elements up to iron and bismuth.

Nuclear power supplies almost half of US carbon-free energy

As of 2023, nearly 20% of US electricity comes from nuclear power, but most reactors were built from 1971 to 1990. Expansion slowed due to safety concerns, high costs, and competition from natural gas.

Methods for disposing of nuclear waste include melting it into a liquid to create glass, dumping it into graphite blocks, storing it in lead-lined rooms, and submerging it in deep pools of water.

Helium formation, from radioactive decay inside Earth to nuclear fusion within stellar cores

Over the course of billions of years, uranium and thorium undergo alpha decay, producing helium nuclei—two protons and two neutrons—which become helium atoms after gaining two electrons. This helium becomes trapped in underground reservoirs along with other gases and can be recovered during natural gas extraction.

Watch a visualization of a fission chain reaction

When a neutron collides with an atom, it is absorbed into the nucleus. If the resulting nucleus is unstable, it can undergo a series of decays that turn it into a less massive nucleus while releasing energy and other particles.

Visualize what happens to atoms during nuclear fission and how the process produces energy

Nuclear fission occurs when an unstable, often massive, atomic nucleus splits into smaller ones—daughter atoms—and releases energy. Within a nuclear reactor, these daughter atoms can collide and combine with neighboring atoms, destabilizing them and triggering a chain reaction of atomic splitting.

Visualizing the chemistry of nuclear weapons

Nuclear weapons have devastating effects, but the science of how they work is atomically small. There are two main types of nuclear reaction: fission and fusion. The fission bomb produces immense energy by splitting an atom, the result of firing a...

The first nuclear reactor was built three years after nuclear fission was discovered

After learning that large atomic nuclei release energy upon being split apart, scientists quickly researched how to control the reaction to make electricity. Fusion—combining small atomic nuclei—generates massive energy in stars and hydrogen bombs.

With a reported value of $20M per kilogram, space resource extraction companies are seeking to harvest helium-3 from the moon for its potential use in clean nuclear fusion.

Nuclear-powered missiles replace chemical combustion with energy from nuclear fission

In these systems, energy is added to an airstream, which passes through a nozzle to generate thrust. Because the amount of energy released per unit mass of nuclear fuel is millions of times larger than that of chemical propellants, nuclear missiles can travel faster and farther with less fuel.

View the most expensive materials on Earth, led by antimatter and other elements forged in particle accelerators.

How gold, platinum, and many rare earth elements form during neutron star mergers

While massive stars naturally fuse elements as heavy as iron, an analysis of gravitational waves from the collision of two neutron stars revealed that more massive elements are created in this environment via rapid neutron capture—the r-process. This phenomenon sees existing iron nuclei absorb plentiful free neutrons, many of which decay into protons, creating new elements.

How the nuclear shell model explains the stability or radioactivity of atomic nuclei

When the number of protons and neutrons completely fills shells within the nucleus, the binding energy that prevents these particles from being pulled apart increases. These are called "magic numbers," and they produce atoms with exceptionally stable nuclear configurations.

Build atomic nuclei to explore their instability and resulting radioactive decay

In this simulation, users can add protons and neutrons to create an atomic nucleus, view its half-life and decay options, and identify patterns in how specific combinations of particles create extremely stable nuclei, from which the nuclear shell model of stability emerged.

Before 1932, when particle accelerators were first used for nuclear research, scientists relied on naturally radioactive substances to advance their understanding of the atomic nucleus.

With less than 50 milligrams present in the top kilometer of Earth's crust at any given time, astatine is the rarest naturally occurring element on the planet.

Nuclear batteries generate electrical currents using radioactive materials

Rather than using electrochemical reactions to produce the electrons that flow through a circuit, isotopes like nickel-63 undergo beta decay—emitting electrons—which a semiconducting material can absorb to establish a charge imbalance that generates current. Such batteries could provide low-power energy for decades.

Unusually stable, undiscovered elements may exist near atomic number 126

While heavier elements like uranium and plutonium are unstable and decay quickly, simulations suggest a pocket of stability exists for elements with approximately 126 protons and 184 neutrons. Such elements may have practical applications, such as americium, a synthetic element used in smoke detectors.

An overview of radioactivity, which can spontaneously change one element into another

Unstable atomic nuclei can transmute into a new element—an atom with a different number of protons—by emitting an alpha particle (two protons and two neutrons) or a beta particle (an electron). The electron can emerge from the nucleus when a neutron, which has no charge, suddenly transforms into a proton and an electron, thereby maintaining zero charge before and after the transformation, but altering the original element.

Clean energy technologies are more mineral-intensive than burning fossil fuels

Solar panels use silver due to its high conductivity, hydropower plants use chromium in their steel alloys, and geothermal plants need titanium to withstand abundant heat and pressure. Lithium—used in energy storage—is expected to see over 500% increased demand from 2020 to 2025.

As of 2024, there are 90,000 tons of nuclear waste stored at 100+ sites in 39 states

Over 315,000 bundles of spent nuclear fuel rods are stored in water pools and over 3,800 dry storage casks in concrete vaults above ground. Corrosion from saltwater spray threatens waste containers of reactors near oceans.

Why everyone is racing to get rare earth minerals

Rare earth minerals are crucial for high-tech electronics and transitioning to new energy sources. China currently dominates rare earth processing capacity, but the US is seeking to increase its mineral production by using its geopolitical influence to strike international mineral agreements with nations like Ukraine.

Turning nuclear waste into cancer medications

This video explores Terrapower, a company transforming nuclear waste into lifesaving cancer treatments. This is accomplished through the production and use of Actinium 225, a rare isotope derived from thorium, which is used in targeted alpha therapy to treat cancer.

The Manhattan Project operated at three key sites, each with a distinct role in building the first atomic bomb.

What fuels the sun?

The sun is our biggest source of heat and light, but how does this massive powerhouse continue to produce such amazing energy? Basically, it's a fusion reactor. At its core the sun produces all that solar energy through hydrogen fusing and converting into helium, over and over again. Learn more about the entire amazing and explosive process here.

The discovery of the neutron paved the way for nuclear weapons

In 1932, James Chadwick discovered the subatomic particle when trying to explain the radiation emitted by beryllium after it was bombarded with alpha particles. The radiation’s ability to eject protons from a target suggested a chargeless particle with slightly more mass than a proton.

A beam of neutrinos can be created by firing a beam of high-energy protons at a target to produce unstable particles that decay into neutrinos.

Geothermal power can reduce the dangerous mining of rare earth elements

Geothermal brines—mineral-rich underground fluids extracted for use in geothermal plants—contain small concentrations of REEs that can be recovered after energy generation. Although researchers suggest that this retrieval requires complex extraction methods at a significant scale to account for high flow rates, the chemical processes also occur in traditional REE processing.

An imbalance in nuclear reactivity factors caused Chernobyl's reactor to explode

The initial explosion resulted from excessive steam pressure that had built up in a runaway manner due to design flaws and violations of safety protocols. Once exposed to atmospheric oxygen, the hot graphite in the control rods underwent a combustion reaction, resulting in a secondary explosion.

The formation of a neutron star through a core collapse lasts one-tenth of a second

Massive stars keep fusing heavier and heavier elements in their cores to produce energy that pushes against the weight of the star itself. However, the fusion of silicon into iron consumes energy and initiates a feedback loop that rapidly compresses the stellar core, creating neutrons and neutrinos from the combination of electrons and protons.

The 'Elephant's Foot' in Chernobyl is part of the largest documented mass of corium

The nuclear disaster produced around 200 tons of nuclear fuel that mixed with the surrounding melted reactor core materials. As of 2025, corium has been naturally formed four other times in history: once during the Three Mile Island accident and three times at the Fukushima Daiichi plant disaster.

Explaining the engineering challenges of extracting metal-rich nodules from the seafloor

Proposed solutions for collecting these potato-shaped rocks involve lifting a slurry composed of them, organic debris, and water through several kilometers of flexible tubing to a ship on the surface, a process that is more difficult than pumping crude oil. One method would use compressed air, but this method is only 15% energy-efficient.

More than 90% of the atoms in the human body were forged by stars, with almost three-quarters originating from the explosion of massive stars.

Rare earth elements may be extracted from mine waste and coal ash

Rather than focusing solely on new mining operations, which can take decades to establish, some startups are developing methods to extract these metals from the toxic waste of existing operations and thereby minimize environmental impacts. (Some readers may experience a paywall.)

View a step-by-step breakdown of how helium is forged in stars alongside antimatter

During the proton-proton chain, four hydrogen nuclei—protons—are fused together to create an alpha particle—a helium nucleus—and produce the energy that supports a star's own weight. Through radioactive decay, two of these protons become neutrons, with each releasing an antielectron, or positron, and an electron neutrino.

A nuclear reactor's characteristic blue light is produced from superluminal particles

When light travels through water, its effective speed is 25% lower than its speed in a vacuum. Just as sound waves bunch up and produce a sonic boom when objects move faster than the speed of sound, particles moving faster than this reduced speed generate a shock wave of light, visible as a blue hue.

More than 97% of the world's particle accelerators are used for commercial purposes

Only a few hundred of the over 30,000 particle accelerators worldwide are used for research. Most are involved in medical imaging and treatment, food sterilization, semiconductor processing, cargo screening, and radioisotope production. They're also used to modify the properties of polymers.

An overview of the metals obtainable through deep-sea mining of nodules and crusts

Polymetallic nodules are a source of manganese, cobalt, nickel, copper, molybdenum, and platinum, which are used in batteries, fuel cells, and metal alloys of electric vehicles. Seamount crusts contain rare-earth elements deemed essential to US national and economic security, including neodymium and dysprosium used to make permanent magnets.

View the periodic table of radioactive elements, and a list of each's most stable isotopes

Technetium is the lightest artificial radioactive element, which is produced primarily as a byproduct of nuclear fission. Several unstable isotopes are commercially available to medical professionals and scientists, despite their radioactivity risks.

Microreactors are 100 to 1,000 times smaller than traditional nuclear reactors but still generate thermal energy for heating or electricity by splitting atomic nuclei.

The world's first artificial element, technetium, was discovered 68 years after its existence was predicted in order to fill a gap in the periodic table.

Explaining why solving the solar neutrino problem revealed that neutrinos could transform

Electron neutrinos are byproducts of the nuclear reactions within the sun's core. Based on the sun's energy output, scientists modeled reaction rates and predicted neutrino production, but the observed values were consistently one-third the predicted values. Experiments later showed that these neutrinos could change into other types on their way to Earth, causing the discrepancy.