Scientists have diverted the path of lightning using lasers

Scientists have proposed using lasers to push space trash into Earth's atmosphere

Such projects would allow most debris to burn up and no longer pose a risk to active satellites, telescopes, and astronauts on space stations. Enacting these plans would require substantial investments from private and governmental space agencies and overcoming international laws that prevent the removal of another country's space equipment.

Lasers could be the most cost-effective tool for clearing dangerous space debris

A NASA study found that lasers from ground- and space-based systems could utilize the momentum of light to safely push smaller debris out of their orbits. These systems would need to be accompanied by amendments to international space law, which prevents any nation from touching debris from another country, among other strategies.

Lightning rods provide a conductive pathway to safely steer massive electric currents

The device is positioned higher above the ground to "catch" one of the many branching filaments of electrons from clouds before they make contact with other surface structures, which have been induced to have a positive charge by overhead storm clouds. The current is then sent to a conductive grid buried underground.

NASA uses a specialized plasma wind tunnel to test heat shield technology

The ArcJet Complex ionizes compressed air that fires onto shields at hypersonic speeds, replicating the conditions of high-speed, planetary reentry. An enhanced facility incorporates lasers to mimic the radiant heating experienced during high-energy atmospheric traversal.

The origin of LASIK eye surgery, from a lab incident to federal funding and widespread use

After a University of Michigan engineering student suffered retinal burns from an ultrashort pulse laser, researchers realized it could be used to reshape the cornea and improve a person's vision with greater precision than a scalpel and earlier laser technologies. Agencies, including the National Science Foundation, the National Institutes of Health, and the Department of Energy, provided funding to develop and commercialize the procedure.

A laser energy system has allowed scientists to achieve fusion ignition

In 2022, scientists used lasers to create a powerful implosion that bound hydrogen isotopes together, releasing more energy than was input into the system. Research is ongoing to achieve this self-sustaining reaction with larger yields and energy gains.

Watch lightning strike a building at 40,000 frames per second

When the built-up layer of negative charge at the bottom of clouds is sufficiently high, a network of charge filaments will emerge. If one of the filaments meets a rising strand of positively charged particles, a highly conductive path forms, and charges across all filaments move to the path, generating lightning

Lasers help build the layers of circuit components in microchips

During the photolithography process, light is projected through a blueprint onto a light-sensitive chemical layer on silicon wafers, etching patterns that become transistors through a series of successive reactions. These processes require significant electricity, as only about 2% of photons reach the wafer.

Research shows that cosmic rays may trigger the cascade of displaced electrons needed to produce lightning, which is also enabled by pointed ice crystals that create strong electric fields.

Space probes propelled by lasers may one day visit distant planetary systems

Launched in 2016, Breakthrough Starshot is a project to send gram-sized spacecraft to the nearest stars and their planets at 10% to 20% the speed of light after being accelerated by ground-based laser systems. The project requires orders of magnitude advancements to current technology.

Scientists have tested atmospheric models by firing rockets into the aurora borealis

Functioning like components of a CT scan, the missiles transmit signals that can be used to identify charged particles and electromagnetic currents in slices. The slices are then combined to construct a computer-based model of Earth's atmospheric structure, which is used to compare the accuracy of physics-based models.

Stimulating electrons to emit identical photons produces lasers

This effect was predicted by Albert Einstein in 1917, and requires all excited electrons in a material to exist in the same excited metastable state within their atoms. Pumping all atoms through the same mechanism, such as electricity or flash lamps, can create this environment.

Some materials can absorb low-energy light and emit high-energy radiation

Through anti-Stokes cooling, incoming energy is combined with vibrations in a material's crystal lattice to produce a net reduction in its temperature. Using this effect, lasers can be directed at microchip hot spots to help keep data centers cool.

Laser technology powers communication, medical and manufacturing tools

Lasers are used when scanning groceries, printing documents or undergoing cosmetic procedures to enhance efficiency, precision and accuracy. Missile defense, targeting and optical communication systems have made using laser technology habitual in the military.

Solar sails use light as a means of propulsion

Photons possess momentum and can transfer it to objects they strike or bounce off, imparting radiative pressure, or a light-based force over a small surface area. Lasers fired at observational equipment with specially designed sails can theoretically use this mechanism to accelerate up to 20% the speed of light.

The unpredictability and brevity of lightning make lightning power impractical

While a typical lightning strike provides 30,000 amps at 300 million volts, the bolt only lasts about 30 microseconds. If the electrical surge could be captured—assuming one knew beforehand where it would strike—it would only provide enough electricity to power one home for about 6.4 hours.

Lichtenberg figures capture lightning-like patterns within insulators

When high-energy electrons from particle accelerators are fired into materials like acrylic, they form a charged plane before discharging into scarred patterns within the material. By evenly charging a cylindrical bottle through rotation during the irradiation process, a 3D figure of lightning in a bottle can be created.

Track lightning strikes around the world

The Blitzortung platform triangulates the positions of this phenomenon from stations that detect atmospheric interference in low-frequency signals that are characteristic of lightning strikes. A network of nearly 2,000 stations transmits the required data to a central server, where its software performs these calculations and generates the subsequent visualization.

How lasers have become a go-to in archaeology

Archaeological teams now have another item to pack with their trowels: Lasers. Researchers' approach to unsurveyed land has been transformed by light detection and ranging technology. LiDAR has helped archaeologists break new ground and uncover...

Scientists can create movies of atomic and molecular phenomena using X-ray free-electron lasers, in which images are produced by matter being struck by high-intensity light created by accelerating electrons.

In an X-ray free-electron laser, electromagnetic fields are used to accelerate and move electrons in wiggling patterns, causing them to emit synchronized, high-energy X-rays. This resulting light beam can strike targets up to 120 times per second to create movies of changing molecular structures and phenomena.

Artificial lightning can improve the yield of shiitake mushroom growers

Researchers have found that shockwaves produced from lightning strikes homogenously break internal filaments called hyphae, transitioning the mushrooms from a vegetative growth to a fruiting phase. Repeated minor shocks near mushroom logs mimicked this effect.

At the Large Hadron Collider, protons are accelerated so close to the speed of light that they would lag behind a laser by just 10 feet after 14 minutes of travel.

Random lasers can be created from biomaterials, such as peanuts and birch leaves

Rather than creating a narrow beam of light via amplification in an optical cavity, the random laser produces a red glow by scattering photons created in the natural pores of a peanut kernel after it has been injected with a solution of light-generating carbon dots derived from birch leaves.

How to cook food with lasers

Creative Machines Lab at Columbia Engineering have developed a system of software-controlled lasers to cook food with precision, retain moisture with the final-cooked product, brown food within its original packaging, and create an entirely new meal creation process for a consumer. Watch this three-minute video to see for yourself.

Explore a gallery of lightning photography taken from the Grand Canyon

In this series, award-winning photographer Adam Schallau accompanies each image with expert advice on how to capture the phenomenon successfully. Initially requiring the shutter to remain open for extended periods, today's technology includes a device called a lightning trigger, which senses incoming lightning and automatically manages the shutter.

Lasers can be used to reduce the motion of atoms because particles of light—photons—can collide with particles of matter, as billiard balls do, to slow them down.

Lasers have been used to create natural adhesives for paper

German researchers at four Fraunhofer institutes have developed a method to seal paper packaging using a carbon monoxide laser. Without the need for glue or plastic adhesives, the Papure project is expected to improve the recyclability of paper. (Some readers may experience a paywall.)

Lightning may kill as many as 320 million trees each year

Ignoring the effects of tree loss resulting from lightning-induced wildfires, researchers at the Technical University of Munich developed a quantitative model to estimate the loss of these organisms due to cloud-to-ground strikes, based on global lightning data and forest structure. They expect the estimate to rise due to increased strikes resulting from climate change.

Lidar's discoveries: 32 forts revealed by the laser tech

Lidar is a cutting-edge tool using lasers from an aircraft to map the elevations of huge swaths of land across the world. This technology has been especially effective in archaeology. It has revealed dozens of lost major historical sites concealed beneath overgrown brush and forests. From Canadian forts to Mayan settlements, check out these 32 significant finds from lidar.

NASA began investigating the healing properties of red light therapy in the 1980s, when researchers studying how LED lights could aid in photosynthesis noticed that their hands seemed to heal faster than normal under the lights.

Lightning forms when streams of rising and falling charged particles connect

In cloud-to-ground lightning, a buildup of negative charge at the bottom of clouds repels electrons on Earth's surface, leaving behind positively charged particles. When descending negatively charged air—the stepped leader—meets rising positively charged particles—the upward streamer—brightening runs up the connection, producing intense flashes known as return strokes.

Some scientists hypothesize that stressed rocks can discharge built-up static electricity in the form of lightning—a phenomenon known as fracto-luminescence, or earthquake lights.

Project STORMFURY explored modifying hurricanes with silver iodide

Between 1962 and 1983, researchers at the National Oceanic and Atmospheric Administration investigated whether weakening and controlling hurricanes was possible. The investigation showed very few hurricanes met the criteria for modification, despite successfully weakening two storms.

The characteristic zigzag of lightning originates from columns of conductive oxygen

Energized electrons from the base of clouds collide with oxygen molecules, placing them in a "singlet delta state," which makes the air conductive. Collisions continue until more than 1% of nearby oxygen is in this state—about 0.00005 seconds—matching the electrical potential of the cloud and propogating electricity in a 50-meter "step."

Space-based solar power systems may beam energy to Earth

Researchers have successfully collected power from solar panels on a plane and transmitted it to a receiver on Earth's surface, achieving a milestone for space-based energy. The proof of concept is a precursor for a satellite-based solar farm that would transmit energy 24 hours a day.

Antimatter can be created from dark lightning—high-energy light emitted by deflected electrons after they are accelerated to near the speed of light by thunderstorms.

Most commercial planes get struck by lightning multiple times a year

This piece explains why commercial aircraft rarely crash in thunderstorms, detailing how pilots use onboard radar, shared reports, and strict avoidance protocols to navigate storms that look far more dangerous on screen than in reality.

Despite the visibility of lasers in space battles within science fiction, they are impossible to see in outer space unless they are pointed directly at an observer.

The air around lightning can reach a temperature of about 30,000 degrees Celsius (54,000 degrees Fahrenheit)—five times hotter than the surface of the sun.

Colorful thunderstorm phenomena can be viewed from the International Space Station

Transient luminous events are lightning-related phenomena that occur in the atmosphere above storm clouds. These events often look like columns of red light resulting from electrical discharge, but may also appear as purple tendrils or long blue jets.

There are no outdoor locations that are safe from lightning

If your hair stands up amid an approaching storm, seek shelter immediately, as a local buildup of charge imbalance precedes cloud-to-ground lightning. If you are stuck outside, move to a lower altitude, such as a valley or ravine, and avoid open fields, water, and isolated tall objects. Do not lie down or crouch.

Microchip fabricators create light by heating tin droplets to over 220,000 Kelvin

Every second, lasers strike 50,000 droplets moving at 250 kilometers (155 miles) per hour, vaporizing the tin in supernova-like miniature explosions that produce ultraviolet light. Knowing this light will spread via diffraction as it passes through a filter during manufacturing, designers reverse-engineer the filter design based on the required final microchip pattern.

Being near a lightning strike—even without getting struck—can be fatal

Because animal tissue is generally more conductive than soil, electricity moving along Earth's surface after a strike tends to travel up and back down an animal's legs, discharging dangerous amounts of energy along the way, with risks increasing the farther apart the legs are. This ground current accounts for about half of all lightning-related deaths and injuries in humans.

Every day, lightning releases several Hiroshima bombs' worth of energy into the atmosphere

If all this lightning struck one location at once, the bolt would be the diameter of the center circle of a basketball court, turning the entire court into a crater. Its heat would ignite surfaces for miles around, and its shockwave would demolish buildings.

Learn how to build your own cloud chamber to detect cosmic rays—particles from space that move near the speed of light—at home.

As of 2025, the longest lightning bolt in the world spanned several states

Although the average bolt measures less than 16 kilometers (10 miles), the 2017 "megaflash" spanned 829 kilometers (515 miles) from eastern Texas to Missouri. Severe thunderstorms are common in the region, where warm, humid air from the Gulf collides with cool, dry air from the north, generating atmospheric instability.

Dust particles on Mars can generate lightning

Through triboelectric charging, sand and dust on the Martian surface can become electrified when they rub against one another, causing friction to displace electrons and create charged particles. If this matter forms a strong enough electric field, it can overcome atmospheric insulation and produce electrical discharges, resembling lightning on Earth.

View the various types of lightning

The most common form of lightning involves channels of electricity between oppositely charged regions within a cloud or between two clouds to reestablish electrostatic equilibrium. While cloud-to-ground lightning is understood best, research is ongoing to fully model the mechanisms behind rarer forms of lightning, such as transient luminous events.

Rain-catching tubes provide new hydropower source for tropical regions

An experiment in Singapore showed that charge separation could be established by rainwater flowing through narrow tubes. The separation, which creates a voltage, could be scaled up in regions of high rainfall to provide a clean energy source.

Particle accelerators propel matter toward small targets at high speed

Devices like cathode-ray tube televisions were once basic particle accelerators, but modern ones, such as the Large Hadron Collider, use massive magnetic fields and circular tunnels to achieve energies high enough to recreate the conditions just after the big bang.