Random lasers can be created from biomaterials, such as peanuts and birch leaves

Stimulating electrons to emit identical photons produces lasers

This effect was predicted by Albert Einstein in 1917, and requires all excited electrons in a material to exist in the same excited metastable state within their atoms. Pumping all atoms through the same mechanism, such as electricity or flash lamps, can create this environment.

Some materials can absorb low-energy light and emit high-energy radiation

Through anti-Stokes cooling, incoming energy is combined with vibrations in a material's crystal lattice to produce a net reduction in its temperature. Using this effect, lasers can be directed at microchip hot spots to help keep data centers cool.

How to cook food with lasers

Creative Machines Lab at Columbia Engineering have developed a system of software-controlled lasers to cook food with precision, retain moisture with the final-cooked product, brown food within its original packaging, and create an entirely new meal creation process for a consumer. Watch this three-minute video to see for yourself.

Photons emitted via stimulated emission have identical characteristics

When confined to a pair of mirrors, a single photon passing a region of population-inverted atoms can produce a chain reaction of monochromatic light. This chain reaction amplifies the initial photon, from which lasers get their name: light amplification by stimulated emission of radiation.

Lasers are classified based on their gain medium and mode of emission

All lasers possess a material whose atoms must be energized by a power source, such as electricity or chemical reactions. Different media will produce different colors of light through a cascade of emissions resulting from an initial stimulated emission.

Lasers have been used to create natural adhesives for paper

German researchers at four Fraunhofer institutes have developed a method to seal paper packaging using a carbon monoxide laser. Without the need for glue or plastic adhesives, the Papure project is expected to improve the recyclability of paper. (Some readers may experience a paywall.)

The origin of LASIK eye surgery, from a lab incident to federal funding and widespread use

After a University of Michigan engineering student suffered retinal burns from an ultrashort pulse laser, researchers realized it could be used to reshape the cornea and improve a person's vision with greater precision than a scalpel and earlier laser technologies. Agencies, including the National Science Foundation, the National Institutes of Health, and the Department of Energy, provided funding to develop and commercialize the procedure.

Microchip fabricators create light by heating tin droplets to over 220,000 Kelvin

Every second, lasers strike 50,000 droplets moving at 250 kilometers (155 miles) per hour, vaporizing the tin in supernova-like miniature explosions that produce ultraviolet light. Knowing this light will spread via diffraction as it passes through a filter during manufacturing, designers reverse-engineer the filter design based on the required final microchip pattern.

Fiber lasers used for metal engravings can’t burn your skin

These devices use diodes and mirrors to create pulses of light that vaporize metal in billionths of a second, though at wavelengths that cannot react with organic material. Pulse width, power, and speed adjustments can produce white, black, and even colored patterns through controlled heat reactions.

Lasers help build the layers of circuit components in microchips

During the photolithography process, light is projected through a blueprint onto a light-sensitive chemical layer on silicon wafers, etching patterns that become transistors through a series of successive reactions. These processes require significant electricity, as only about 2% of photons reach the wafer.

Chromium contaminants in a ruby crystal gave the world's first laser its red color

The red light originates from a long-lasting excited electron state in the element's atomic structure. The brittle gray metal has historically been used in pigment production, the manufacturing of rust-resistant stainless steel, and the creation of durable coatings with long-lasting shine for metals, wood, and leather.

Laser technology powers communication, medical and manufacturing tools

Lasers are used when scanning groceries, printing documents or undergoing cosmetic procedures to enhance efficiency, precision and accuracy. Missile defense, targeting and optical communication systems have made using laser technology habitual in the military.

NASA began investigating the healing properties of red light therapy in the 1980s, when researchers studying how LED lights could aid in photosynthesis noticed that their hands seemed to heal faster than normal under the lights.

Particle beams can be used to alter the surface properties of artificial joints

Surface hardening and embedding specific elements or coatings can improve the biocompatibility and bone tissue integration of these implants. Particle accelerators are significant sources of the radioisotopes needed in medical diagnostics, and microwave linear accelerators are used in the majority of cancer irradiation treatments.

Scientists can create movies of atomic and molecular phenomena using X-ray free-electron lasers, in which images are produced by matter being struck by high-intensity light created by accelerating electrons.

In an X-ray free-electron laser, electromagnetic fields are used to accelerate and move electrons in wiggling patterns, causing them to emit synchronized, high-energy X-rays. This resulting light beam can strike targets up to 120 times per second to create movies of changing molecular structures and phenomena.

Bioluminescent reaction enzymes are often used in biomedical research

Near-infrared luciferase systems allow researchers to image and analyze cellular activity in living animals because they penetrate tissue more deeply than visible light. This provides a means of studying gene expression and protein interactions without harming the animals.

Blacklights can illuminate certain biological materials, including blood, teeth, and fingernails, because they contain fluorophores—molecules that visibly glow immediately after exposure to higher-energy light.

Lasers can be used to reduce the motion of atoms because particles of light—photons—can collide with particles of matter, as billiard balls do, to slow them down.

Scientists have diverted the path of lightning using lasers

A proof of concept for a laser protection system, which could be used to protect launchpads and airports in the future, was conducted on the Säntis mountain in northeastern Switzerland. Rapid laser pulses heated air molecules, creating a more conductive, 50-meter (164-foot) path for the electrical discharge to travel through.

As of 2023, the world's smallest particle accelerator is smaller than a penny

The prototype is an example of a photonic accelerator, which utilizes tiny lasers to accelerate electrons rather than relying on oscillating electromagnetic fields to move them. It can deliver about 1 electron per second with energies equivalent to those found in cathode-ray tube televisions.

Despite the visibility of lasers in space battles within science fiction, they are impossible to see in outer space unless they are pointed directly at an observer.

High-powered red light therapy—delivered directly to nerve fibers via a fiber optic needle—has been used in recent experimental research to suppress pain.

Solutions of bioluminescent bacteria can create FOMO-inducing living art

A 2002 exhibition at Montana State University-Bozeman placed the bacteria onto petri dishes that served as macroscopic pixels to create images. Once the bacteria finished eating all the food in the sealed dishes, the light slowly faded away, ending the exhibit.

View examples of luciferin, the light-emitting molecule behind bioluminescence

Bioluminescent marine organisms rely on various unique luciferins, including Cypridina-type luciferin in seed shrimp and chlorophyll-based dinoflagellate luciferin, to react with oxygen to produce light. These chemicals require unique catalysts to help them bind with oxygen.

Scientific applications of bubbles include logic gates, laser production, and medical imaging

Microbubbles of nonreactive gas can be administered to improve the reflection of sound waves and the resulting imaging during an ultrasound. Bouncing light waves within a bubble can stimulate emission of light from a trapped chemical, just as occurs within a laser, and bubbles can act as valves that control the flow and reaction rates in microfluidic systems.

Through sonoluminescence, concentrated sound waves can produce short, high-intensity flashes of light by rapidly collapsing microscopic bubbles to temperatures up to twice that of the sun's surface.

How helium greatly improves the efficiency of barcode-scanning lasers

Rather than directly energizing neon atoms, electrical discharge at lower, more practical power levels can excite helium atoms to energy levels nearly equal to those in neon atoms. Within a helium-neon laser, these gases are present in a 10-to-1 ratio, enabling helium to efficiently transfer energy to neon, which is then discharged as red light.

Bacteria have been genetically engineered to bioluminesce when wine has spoiled

Developed by researchers at Hebrew University, the method involves the firefly enzyme luciferase, which emits light from within bacteria expressing when they are in the presence of acetic acid vapors produced by wine. The process provides affordable, on-site, real-time monitoring of fermentation quality.

Solar sails use light as a means of propulsion

Photons possess momentum and can transfer it to objects they strike or bounce off, imparting radiative pressure, or a light-based force over a small surface area. Lasers fired at observational equipment with specially designed sails can theoretically use this mechanism to accelerate up to 20% the speed of light.

Lasers could be the most cost-effective tool for clearing dangerous space debris

A NASA study found that lasers from ground- and space-based systems could utilize the momentum of light to safely push smaller debris out of their orbits. These systems would need to be accompanied by amendments to international space law, which prevents any nation from touching debris from another country, among other strategies.

How lasers have become a go-to in archaeology

Archaeological teams now have another item to pack with their trowels: Lasers. Researchers' approach to unsurveyed land has been transformed by light detection and ranging technology. LiDAR has helped archaeologists break new ground and uncover...

Bioluminescence may provide a sustainable alternative to electric lighting

French start-up Glowee is experimenting with lights made from bioluminescent microorganisms in public spaces to reduce energy use. While the technology shows promise, challenges remain with brightness, maintenance, and scaling it for widespread use.

Laser skin treatments can promote the production of collagen

Skin resurfacing vaporizes the top layer of skin to reveal healthier, new skin, while collagen can give the skin structure and elasticity. Such procedures treat scars and burns, but may leave light spots on the skin.

What are pulsars?

Pulsars are neutron stars created as part of stellar evolution and emit radiation beams visible from Earth. These beams pulse like a lighthouse's light due to the star's rotation, creating periodic high-energy emissions. Pulsars were first discovered as radio sources; it was also discovered they emit gamma rays. NASA uses its Fermi Gamma-ray Space Telescope to retrieve and analyze data from pulsars.

Lasers, semiconductors, medical imaging, and atomic clocks rely on quantum mechanics

Semiconductors, crucial in electronics, operate based on quantum superposition. Lasers use stimulated emission, a quantum process, and MRI machines leverage the quantum spin of hydrogen atoms for imaging. Atomic clocks measure time with unprecedented precision using quantum transitions.

Bioluminescence provides organisms with a method of hunting, defense, or mating

Unlike glow sticks, bioluminescent reactions use renewable resources like oxygen and ATP. This ability allows fireflies to mate and deter predators, anglerfish to confuse and attract prey, and deep-sea shrimp to defend themselves by vomiting glowing slush.

Bioluminescent organisms produce their own light through chemical reactions involving unstable, energetic molecules, while biofluorescent organisms almost immediately re-emit light shone on them, but at a different wavelength.

At the Large Hadron Collider, protons are accelerated so close to the speed of light that they would lag behind a laser by just 10 feet after 14 minutes of travel.

Laser disc technology stores binary data in etched pits and lands

The pits are dips in the LaserDisc, CD, DVD, or Blu-ray surface that do not reflect the laser from the optical drive back to the photoelectric cell, resulting in a coded zero. Lands are reflective plateaus on the surface that code for a one.

Removal of different color tattoo inks may require multiple lasers

Light needs to be absorbed by ink particles to break them down into small enough pieces for the immune system to eliminate. Color ink reflects, rather than absorbs, lasers of the same color, while black ink absorbs all colored lasers.

Artificial goose bumps could theoretically be used for information storage

Inspired by how fine hairs stand on the skin with goose bumps, researchers have recently created artificial skin that raises artificial goose bumps when exposed to a laser. This type of precise, localized, and controllable system could potentially fuel later development of programmable machines that could be used for information storage.

Scientific breakthroughs funded by NASA, the NSF, and the NIH include GPS, sign language, bladeless LASIK surgery, and quantum dots—tiny semiconductor crystals used in many modern televisions.

Scientists create contact lenses that give you infrared vision

Scientists have created lenses that use nanoparticles to convert infrared light into visible light, allowing human eyes to observe previously invisible parts of the electromagnetic spectrum. This technology may help colorblind individuals by converting colors they cannot see into wavelengths they can.

Lichtenberg figures capture lightning-like patterns within insulators

When high-energy electrons from particle accelerators are fired into materials like acrylic, they form a charged plane before discharging into scarred patterns within the material. By evenly charging a cylindrical bottle through rotation during the irradiation process, a 3D figure of lightning in a bottle can be created.

A laser energy system has allowed scientists to achieve fusion ignition

In 2022, scientists used lasers to create a powerful implosion that bound hydrogen isotopes together, releasing more energy than was input into the system. Research is ongoing to achieve this self-sustaining reaction with larger yields and energy gains.

A beam of neutrinos can be created by firing a beam of high-energy protons at a target to produce unstable particles that decay into neutrinos.

Glowing chemicals allow scientists to read DNA like a barcode

The process of determining the order of nitrogenous bases in DNA involves first cutting the DNA into fragments, which are duplicated multiple times using bacteria. Fluorescently labeled terminator bases are added to fragments, which are sorted by length and read via laser to reconstruct the sequence.

Red light therapy—a treatment harnessing a specific form of energy that penetrates the top layers of skin—is marketed for skincare and wellness, but has its roots in NASA plant growth research.

Holograms are produced by shining light through recordings of interference patterns

When one half of a split laser beam that was reflected off the surface of an object recombines with its other, unreflected half, the two produce an interference pattern that becomes etched onto holographic film. When light shines through the back of the film, it reacts with the pattern to create the reflected light, projecting the original object.

View a gallery of bioluminescent organisms, including jellyfish and mushrooms

Some species produce a quick flash of light, while others glow steadily with an eerie glow, often to seek attention or in response to being disturbed. Snails, worms, fungi, and other organisms highlight that this ability evolved independently, rather than from one common ancestor.