Some materials can absorb low-energy light and emit high-energy radiation

Lasers can be used to reduce the motion of atoms because particles of light—photons—can collide with particles of matter, as billiard balls do, to slow them down.

Microchip fabricators create light by heating tin droplets to over 220,000 Kelvin

Every second, lasers strike 50,000 droplets moving at 250 kilometers (155 miles) per hour, vaporizing the tin in supernova-like miniature explosions that produce ultraviolet light. Knowing this light will spread via diffraction as it passes through a filter during manufacturing, designers reverse-engineer the filter design based on the required final microchip pattern.

Lasers help build the layers of circuit components in microchips

During the photolithography process, light is projected through a blueprint onto a light-sensitive chemical layer on silicon wafers, etching patterns that become transistors through a series of successive reactions. These processes require significant electricity, as only about 2% of photons reach the wafer.

Stimulating electrons to emit identical photons produces lasers

This effect was predicted by Albert Einstein in 1917, and requires all excited electrons in a material to exist in the same excited metastable state within their atoms. Pumping all atoms through the same mechanism, such as electricity or flash lamps, can create this environment.

Data centers can be kept cool by circulating fluid over plates atop high-temperature components or by submerging equipment in non-corrosive oil that does not conduct electricity.

Thermodynamics makes building data centers in space to cool equipment impractical

Rather than cooling via interactions with flowing cold air or water, data centers in space would dissipate energy primarily by radiation, in which an object at any temperature above absolute zero emits light. This method is much less efficient at cooling and would require hyperscale data centers to have radiator panels thousands of times larger than those on the International Space Station.

Synthetic diamonds may be used to cool microchips

The strong carbon bonds in diamonds efficiently carry vibrations, allowing them to conduct heat several times faster than copper, a metal commonly used in heat sinks. AI and high-performance computing have pushed researchers to investigate alternative materials for cooling solutions.

Lasers are classified based on their gain medium and mode of emission

All lasers possess a material whose atoms must be energized by a power source, such as electricity or chemical reactions. Different media will produce different colors of light through a cascade of emissions resulting from an initial stimulated emission.

Random lasers can be created from biomaterials, such as peanuts and birch leaves

Rather than creating a narrow beam of light via amplification in an optical cavity, the random laser produces a red glow by scattering photons created in the natural pores of a peanut kernel after it has been injected with a solution of light-generating carbon dots derived from birch leaves.

Watch a server submerged in a fluid continue to run and stay cool by boiling the liquid away.

Laser technology powers communication, medical and manufacturing tools

Lasers are used when scanning groceries, printing documents or undergoing cosmetic procedures to enhance efficiency, precision and accuracy. Missile defense, targeting and optical communication systems have made using laser technology habitual in the military.

Dilution fridges create the colder-than-space environments needed for quantum computers by successively lowering temperatures across layers plated with gold, which reduces heat transfer via radiation and gives them a chandelier-like appearance.

Photons emitted via stimulated emission have identical characteristics

When confined to a pair of mirrors, a single photon passing a region of population-inverted atoms can produce a chain reaction of monochromatic light. This chain reaction amplifies the initial photon, from which lasers get their name: light amplification by stimulated emission of radiation.

Chromium contaminants in a ruby crystal gave the world's first laser its red color

The red light originates from a long-lasting excited electron state in the element's atomic structure. The brittle gray metal has historically been used in pigment production, the manufacturing of rust-resistant stainless steel, and the creation of durable coatings with long-lasting shine for metals, wood, and leather.

Lasers, semiconductors, medical imaging, and atomic clocks rely on quantum mechanics

Semiconductors, crucial in electronics, operate based on quantum superposition. Lasers use stimulated emission, a quantum process, and MRI machines leverage the quantum spin of hydrogen atoms for imaging. Atomic clocks measure time with unprecedented precision using quantum transitions.

Fiber lasers used for metal engravings can’t burn your skin

These devices use diodes and mirrors to create pulses of light that vaporize metal in billionths of a second, though at wavelengths that cannot react with organic material. Pulse width, power, and speed adjustments can produce white, black, and even colored patterns through controlled heat reactions.

How to cook food with lasers

Creative Machines Lab at Columbia Engineering have developed a system of software-controlled lasers to cook food with precision, retain moisture with the final-cooked product, brown food within its original packaging, and create an entirely new meal creation process for a consumer. Watch this three-minute video to see for yourself.

Photonic integrated circuits use light instead of electrons within circuit components

Instead of processing electric signals, photons in the visible and near-infrared serve as optical signals between chips made of electro-optical crystals. PICs can enable lower power consumption and heat generation by eliminating the friction from electrons moving along wires.

Data centers require interconnected server- and building-level cooling systems

Computer equipment can be cooled by circulating cold air or water through the equipment racks, siphoning the heated fluid into a heat exchanger. This exchanger transfers thermal energy to building cooling systems, which can dispose of the heat by evaporative cooling—the way humans cool off by sweating—or via air conditioning.

Everything with a temperature above absolute zero emits light at nearly all wavelengths

Thermal radiation results from random motions of particles that make up an object, which only theoretically cease at 0 Kelvin, or -273.15 degrees Celsius. The greatest intensity of thermal radiation, also known as blackbody radiation, is emitted at a characteristic wavelength corresponding to the object's surface temperature.

A laser energy system has allowed scientists to achieve fusion ignition

In 2022, scientists used lasers to create a powerful implosion that bound hydrogen isotopes together, releasing more energy than was input into the system. Research is ongoing to achieve this self-sustaining reaction with larger yields and energy gains.

High-powered red light therapy—delivered directly to nerve fibers via a fiber optic needle—has been used in recent experimental research to suppress pain.

Scientists have diverted the path of lightning using lasers

A proof of concept for a laser protection system, which could be used to protect launchpads and airports in the future, was conducted on the Säntis mountain in northeastern Switzerland. Rapid laser pulses heated air molecules, creating a more conductive, 50-meter (164-foot) path for the electrical discharge to travel through.

How scientists determine elemental composition based on the light emitted by cooling atoms

When electrons within an atom drop to a lower energy level closer to the nucleus, they lose energy and produce light with energy equal to the difference between the two energy levels. Because these levels and the corresponding emitted light are unique to each element, the light serves as a unique signature that can be compared to known lab samples for identification.

Photolithography etches circuit components into a semiconductor wafer

A high-energy laser is fired at molten tin droplets, turning them into plasma that releases the ultraviolet light needed to burn the wafer's photoresist layer. A mask controls what parts of the wafer are etched for subsequent chemical processing.

Water vapor is used to manage heat in high-end smartphones

While smartphones have traditionally been cooled using a highly conductive plate that dissipates heat from the chip, vapor chambers offer a higher heat-removal capacity. This technology has been utilized in laptops for decades to absorb heat by cycling a fluid between liquid and gaseous phases.

How helium greatly improves the efficiency of barcode-scanning lasers

Rather than directly energizing neon atoms, electrical discharge at lower, more practical power levels can excite helium atoms to energy levels nearly equal to those in neon atoms. Within a helium-neon laser, these gases are present in a 10-to-1 ratio, enabling helium to efficiently transfer energy to neon, which is then discharged as red light.

Since computers rely on the distribution of electrons in microchips to represent binary code, cosmic rays and ionizing radiation from radioactive elements can introduce software errors by detaching electrons from atoms.

Through sonoluminescence, concentrated sound waves can produce short, high-intensity flashes of light by rapidly collapsing microscopic bubbles to temperatures up to twice that of the sun's surface.

Variations in the energy of light force the use of multiple telescopes

Just as Earth's atmosphere allows the sun's visible light to pass through while blocking other harmful radiation, telescope mirrors and other optics can only reflect, absorb, or transmit certain types of light. Detectors also utilize semiconducting materials that react to specific energies of light, thereby preventing a one-telescope-fits-all solution.

Scientists can create movies of atomic and molecular phenomena using X-ray free-electron lasers, in which images are produced by matter being struck by high-intensity light created by accelerating electrons.

In an X-ray free-electron laser, electromagnetic fields are used to accelerate and move electrons in wiggling patterns, causing them to emit synchronized, high-energy X-rays. This resulting light beam can strike targets up to 120 times per second to create movies of changing molecular structures and phenomena.

Removal of different color tattoo inks may require multiple lasers

Light needs to be absorbed by ink particles to break them down into small enough pieces for the immune system to eliminate. Color ink reflects, rather than absorbs, lasers of the same color, while black ink absorbs all colored lasers.

Light appears to slow down as it travels through different materials

As electromagnetic waves interact with particles in a transparent medium, particles vibrate and generate their own electromagnetic waves. The interference of the original and generated waves, which are slightly delayed, results in ensemble light with an effective slower speed but unchanged color.

View an animation of how certain chemicals fluoresce—that is, emit visible light after having absorbed higher-energy light, such as ultraviolet radiation.

IBM Quantum’s dilution refrigerators keep quantum processors colder than space

In IBM’s quantum lab, quantum processors are kept at a temperature of 15 millikelvin using dilution refrigerators. These refrigerators use nested thermal layers, cryogens like liquid nitrogen and helium, and powerful compressors to maintain the ultra-cold temperatures required for qubit stability and performance.

Laser-etched electric charges guide toner during laser printing

When sending a print job, the file data generates an image that a laser maps positively charged regions onto a drum separately for each color toner. Once the negatively charged toner is applied where it was electrically attracted, heat and pressure fuse it onto the paper.

Laser disc technology stores binary data in etched pits and lands

The pits are dips in the LaserDisc, CD, DVD, or Blu-ray surface that do not reflect the laser from the optical drive back to the photoelectric cell, resulting in a coded zero. Lands are reflective plateaus on the surface that code for a one.

Watch how the machine at the heart of NASA's Cold Atom Lab produces atoms near absolute zero—the coldest theoretical temperature in the universe—for experiments involving quantum phenomena.

Objects can be made invisible through refraction, in which light from behind an object is bent around it, making only the background visible.

There is a limit to how small transistors can become because they rely on being able to allow or block the flow of electrons, but quantum effects allow electrons to leak through these barriers, generating heat, current loss, and potential data errors.

Scientific applications of bubbles include logic gates, laser production, and medical imaging

Microbubbles of nonreactive gas can be administered to improve the reflection of sound waves and the resulting imaging during an ultrasound. Bouncing light waves within a bubble can stimulate emission of light from a trapped chemical, just as occurs within a laser, and bubbles can act as valves that control the flow and reaction rates in microfluidic systems.

Particle beams can be used to alter the surface properties of artificial joints

Surface hardening and embedding specific elements or coatings can improve the biocompatibility and bone tissue integration of these implants. Particle accelerators are significant sources of the radioisotopes needed in medical diagnostics, and microwave linear accelerators are used in the majority of cancer irradiation treatments.

Electricity can flow indefinitely along a ring of superconducting material, which provides zero resistance to the movement of charges due to quantum effects.

The different energy levels of each element result in unique colors when burned

When heated, electrons absorb energy and move to excited states within an atom. They promptly drop back down and release light energy corresponding to the size of the drop, which is unique to each element.

The reflection of light within a material is the basis for fiber optics

As light travels from one material to another, it can be absorbed, reflected, or transmitted through, depending on the properties of the two materials. Fiber optic cables are designed to reflect light internally, minimizing data loss as information is sent at high speeds through flashes that represent zeros and ones.

Lasers have been used to create natural adhesives for paper

German researchers at four Fraunhofer institutes have developed a method to seal paper packaging using a carbon monoxide laser. Without the need for glue or plastic adhesives, the Papure project is expected to improve the recyclability of paper. (Some readers may experience a paywall.)

Glow sticks feed energy released in chemical reactions to fluorescent dyes

When bent, the glass tube inside the stick breaks, releasing hydrogen peroxide into the surrounding solution. The ensuing reaction creates unstable molecules that decompose and release energy, which is then absorbed by molecular dyes that emit light when their excited electrons return to lower energy states.

Infrared light is most often associated with thermal radiation and cooking food

Although extensively used in remote controls for electronics, where LED lights send signals wirelessly, infrared cameras allow for night vision and thermography—imaging of heat patterns in the body to non-invasively reveal blood flow for supplementary diagnostics. Infrared radiation also provides heat in toasters, saunas, and other technologies.

If two strands of conducting materials are connected at two junctions, electricity can be generated if one junction is heated while the other is cooled—a phenomenon known as the Seebeck effect.

By separating light with tools such as prisms, scientists can reveal the presence and composition of celestial matter by identifying color fingerprints unique to specific elements and molecules.