Battery and plug-in hybrid EVs can operate with zero tailpipe emissions

Electric vehicles have been around since the 19th century

The first EVs ran on rechargeable lead-acid batteries, which could travel 60 to 80 miles on a single charge. Women preferred these vehicles, which were quieter, less smelly, and did not require turning a hand crank to start the engine.

While gas-powered engines typically have 2,000 moving parts, electric vehicles have about 20.

Hydrogen fuel cells, which combine hydrogen and oxygen to generate electricity and water, can be run in reverse to produce hydrogen fuel from water.

Hydrogen vehicle adoption has struggled due to high costs and stiff EV competition

Despite features like fast refueling and zero emissions, hydrogen vehicles face significant hurdles in affordability and infrastructure. As of 2025, there are about 200,000 electric vehicle charging stations compared to fewer than 100 hydrogen fuel ones.

The average electric vehicle motor has about 20 moving parts

The simpler design significantly reduces the energy lost to heat compared to the approximately 2,000 parts in a gas-powered car. Pollution is also lower, though an EV's emission profile is only as clean as the electric utility it's plugged into.

Growing EV adoption requires battery management infrastructure

Despite rechargeable batteries' limited life cycle, companies like Spiers New Technologies have developed methods to repair, refurbish, repurpose and recycle these components to minimize environmental waste, lower demand for new critical minerals, and increase electric vehicle lifetimes.

Despite electric usage concerns, EV charging accounts for less than 1% of grid load

Other popular myths about EVs include battery failure concerns—failure rates are less than 1% on newer models—and that there are no places to charge cars, though both at-home outlets and more than 77,000 stations on the road are available.

Charging an EV depends on power source, charger type and battery size

It takes less time to charge an electric vehicle's battery for Level 3 chargers, which can deliver 80% capacity in as little as 30 minutes. Level 1 chargers can take days. Larger vehicles possess larger batteries that increase charging time, despite often having less range.

Nearly 40% of American cars were electric in 1899

They were most common in cities, where battery swap stations allowed drivers to "refuel" their vehicles reliably. Innovations in combustion engines caused electric cars to lose ground until environmental policies and advances in battery technology revitalized interest.

As of 2024, 13 states have plans to phase out gas-powered cars

In 2022, California adopted the Advanced Clean Cars II Act, which requires all new passenger cars, trucks, and SUVs sold to produce zero emissions by 2035. Other states adopted similar laws, joining more than 50 countries with phaseout plans.

As of 2025, most EV batteries retain 95% or more of their range after three years

Data from over 30,000 electric vehicles shows that their batteries are lasting much longer than initially projected, which researchers suggest is due to improved battery management systems and real-world use often being less rigorous than high-performance testing. Cars with 150,000 miles or more that have not had a battery replacement retain at least 83% of their original range.

Explore the human and environmental resources needed to make an electric vehicle

The minerals needed to build batteries for electric vehicles are expensive and often take a human toll paid by the communities where they are mined. This interactive article details what minerals make up an electric vehicle battery, where they come from, and dangers posed by the mining process.

High fuel prices and fuel shortages revived dormant interest in EVs

Electric vehicles, in the form of motorized carriages, predate the invention of the gas-powered automobile by over 40 years. The latter's affordability made it more popular until technological advances made EVs more viable to consumers in the early 2000s.

Audi spent over three years developing engine sounds for its electric vehicles

Unlike the sounds made by combustion engines in gas-powered vehicles, electric cars produce no motor sounds. The company's acoustics team worked with composer Rudolf Helpmier to craft an electric-inspired revving sound for its R8 e-tron supercar.

Internal-combustion engines convert fuel into motion using controlled explosions

Gasoline engines mix fuel and air, compressing it and igniting it to create thousands of tiny explosions that push pistons up and down. This movement spins the crankshaft, which moves a vehicle's wheels.

As of January 2025, Tesla is the second best-selling EV company in the world

Chinese automaker BYD saw nearly three times as many registrations of electric vehicles as Tesla through the sales of its plug-in hybrid and battery electric vehicles. Fellow Chinese competitor Geely sold 12.7% of all BEVs worldwide, surpassing Tesla's 12.4% share during the same period.

Batteries range in size based on their purpose, cost, and manufacturability

Lead-acid batteries used in combustion vehicles are resilient to temperature extremes, low-cost, and provide high surge current, which is needed for initial ignition. Alkaline batteries, including AA, AAA, and B, have long shelf lives and supply the low, steady power required for electronics with minimal demand fluctuations.

Watch how metals are extracted from rechargeable devices during recycling

Recyclable batteries found in cars, phones, power tools, and other electronics contain lithium, cobalt, nickel, and other precious metals, whose reuse generates 70% fewer emissions than during their initial mining. Upon shredding these devices, a filter press squeezes the pieces through a proprietary fluid, which separates them for future reuse.

At its peak in 2001, the Toyota Prius made up 77% of the US hybrid vehicle market

Celebrities and early adopters popularized the model, making it a cultural symbol for eco-conscious driving and fuel efficiency. The rise of fully electric vehicles, like Tesla's Model 3, caused the Prius to lose the spotlight.

Autonomous vehicles have been confirmed to reduce greenhouse gas emissions

Research indicates that self-driving cars can reduce harmful pollution through lower traffic, decreased parking demand, and optimized driving behavior. These benefits can be enhanced further in smart cities with responsive traffic signals.

Tesla plans to eliminate the use of rare earth elements in future vehicles

At a 2023 Investor Day event, Elon Musk outlined steps to focus Tesla's efforts on climate action rather than new vehicle models. Musk estimates the transition to carbon-free, sustainable energy will cost $10T.

Electricity is produced when the ends of a battery are connected by a conducting wire, triggering chemical reactions that release the energy stored in chemical bonds.

Explore a gallery of electric vehicles from before 1920

In 1884, Thomas Parker invented the first practical electric car in London. By the turn of the century, early EVs were seen on the streets of Washington, DC. Automaker promotional materials included photographs of cars on mountain roads and other terrains.

A pair of engineers began Tesla to prove the viability of electric vehicles

Martin Eberhard and Marc Tarpenning sought to design a high-end electric sports car for environmentally motivated, affluent buyers. The Tesla Roadster would be the first highway-legal car to use lithium-ion batteries.

How lithium has become one of the world's most important elements

Lithium is the driving force behind electric vehicles as the key element in the lithium-ion batteries that power the cars. But as demand for EVs rises, will global lithium supply keep pace with demand? This report projects demand will reach up to four million metric tons of the mineral compound containing lithium by 2030, with batteries accounting for 95% of end-use applications.

BYD Auto is the largest EV maker in China, overtaking Tesla

As of 2023, the company has 40% of the electric vehicle market in China and produces more than 3 million EVs for customers worldwide. Its vertical integration, which includes building its own batteries and cargo ships, has allowed BYD to lower retail costs.

More batteries in the power grid would create an on-demand energy reservoir

Most power grids are inefficient because they require enough generation capacity at all times to avoid blackouts. This means at any given time, as much as 50% of generating capacity at power plants can go unused. Batteries would reduce this inefficiency and allow for real-time adjustments.

As much as 10% of home electricity use comes from unused devices left plugged in.

Electrogenic animals generate their own electricity within an electric organ by changing the pattern of electrical charges in disc-shaped cells called electrocytes.

US EV sales grew from 1.4 million vehicles in 2023, to 1.7 million in 2024

California, Florida and Texas have the highest number of electric vehicle registrations in the US, while Mississippi, North Dakota and West Virginia have the lowest. Charging station infrastructure, high costs, and range anxiety contribute to lower adoption rates.

Explore options for recycling batteries

Improper battery disposal can lead to fires and the leaching of harmful chemicals and toxic materials into local soil and water systems. Although many batteries contain metals that can be recycled with less energy than it takes to produce them, variability in regulations across municipalities and states can complicate efforts. (Some readers may experience a paywall.)

Why decarbonizing the entire electric grid is impossible with its current infrastructure

Fossil fuel plants can be built anywhere and have thus typically been built near highly populated areas, such as coastal cities, where electricity demand is high. However, certain renewable resources operate most efficiently in specific regions, such as wind turbines in the Midwest, and therefore require substantial transmission infrastructure to be constructed to transport the generated electricity.

Clean energy technologies are more mineral-intensive than burning fossil fuels

Solar panels use silver due to its high conductivity, hydropower plants use chromium in their steel alloys, and geothermal plants need titanium to withstand abundant heat and pressure. Lithium—used in energy storage—is expected to see over 500% increased demand from 2020 to 2025.

Over-the-air updates, pioneered by Tesla, have become the industry standard

Tesla's innovative direct-to-consumer sales model and online ordering system changed car-buying, and the Model S, which had a 200-mile range, forced other automakers to enhance their EV offerings and rethink vehicle design.

Lithium-ion batteries are the standard for rechargeable devices

The costly setup of new mining operations and challenges with recycling amid growing demand have led researchers to search for alternatives, including sodium-ion, solid-state, and lithium-sulphur batteries, despite challenges with scalability.

Explore a map of every charging station in the US and Canada

An electric vehicle owner's main fear running out of power before getting to their final destination. Using this interactive, users may identify stations and their charger type to map fuel corridors for EV road trips.

BYD overcame Tesla via state backing, cheaper cars, and vertical integration

The one-time battery company eclipsed Tesla in total sales in 2024. The Chinese-backed manufacturer targets low- to mid-tier cars and builds 75% of its components in-house. Its cars typically retail at half the cost of similar Tesla models.

Tesla's alternating current power's most of the world's electric grids

In 1879, Thomas Edison’s light bulb relied on direct current, but such currents can't efficiently transmit power over long distances. Nikola Tesla introduced alternating current, which feature far fewer energy loses. Despite Edison’s attempts to discredit AC, Tesla proved its efficiency by lighting the 1893 Chicago World’s Fair.

View the five most expensive metals used to make batteries

Before 2021, when lithium carbonate became the most expensive metal for use in electric vehicle cathodes, cobalt was the most costly battery metal. Of the top five, copper is the only metal not used in cathodes, arguably the most important part of the battery, which determines performance, longevity, and range.

Solid-state batteries substitute the fluid electrolyte layer with a solid

The non-flammable solid greatly reduces the risk of fire and explosion, as well as the release of toxic gases via leaks in the existing sulfide-based systems. These batteries use garnet-type solid electrolytes, which provide high ionic conductivity and chemical stability but require temperatures above 1,000 degrees Celsius (1,800 degrees Fahrenheit) for fabrication.

California startup Rivian has attracted disillusioned Tesla owners

Some electric vehicle buyers frustrated by Elon Musk's antics have been won over by the adventure-focused company, which has received a $5B investment from the Volkswagen Group to develop crossover and hatchback models with solid-state batteries.

Tesla's production of a high-performance electric vehicle revived the EV industry

The Model 3 shifted public perception by showing that EVs could be fast and desirable, and built at scale. However, at one point, Tesla built an entirely manual production line in a tent outside its main factory to keep up with demand.

Today's cars use turbocharged hybrid engines and AI-assisted technologies

In addition to enhanced speed, serious accidents and technological advances have led to major innovations, leading to more aerodynamic and more protective cars.

The gradual loss of capacity in rechargeable batteries can be delayed by avoiding overnight charging, charging to 100%, fast charging, and exposing your device to excessive heat.

Nuclear batteries generate electrical currents using radioactive materials

Rather than using electrochemical reactions to produce the electrons that flow through a circuit, isotopes like nickel-63 undergo beta decay—emitting electrons—which a semiconducting material can absorb to establish a charge imbalance that generates current. Such batteries could provide low-power energy for decades.

Lithium can store and deliver substantial energy for its cost and weight

When exploring which compounds would be best suited for batteries, scientists sought elements that were relatively inexpensive to mine, readily available, and that provided high energy density—how much chemical energy an element could store for its size. Lithium-ion batteries provide these benefits and discharge at very low rates when unused.

Some geothermal power plants make electricity using a secondary fluid

Direct dry-steam systems pull underground steam into a turbine-generator system, while flash and double-flash cycle systems spray extracted liquid water into a low-pressure tank, causing it to rapidly vaporize—"flash"—before moving to the turbine. Binary cycle systems use the extracted steam and water to flash a second fluid that easily boils, which then drives the turbine.

As of 2022, only about 5% of lithium-ion batteries are recycled globally

Traditional recycling methods have been inadequate for lithium batteries, prompting manufacturers to explore more sustainable battery designs, alongside robotic disassembly and ultrasonic techniques to improve recycling rates. Studies have shown that mining for new lithium requires significantly more water and energy than recycling and results in declining vegetation near mines.

The benefits of 3D printing batteries, from safety to sustainability

Rather than using the liquid electrolyte commonly found in lithium-ion batteries, 3D-printed batteries would use a solid layer, which can be custom-built into different shapes, deliver higher energy density by building thinner layers, and be fabricated with fewer raw materials compared to injection molding.

Watch a tour of a battery manufacturing gigafactory

Inside Contemporary Amperex Technology Limited's facility, China's largest EV battery manufacturer uses slurry mixing, "jelly rolling," electrolyte injection, and other techniques and equipment to transform raw metals such as lithium and magnesium into approximately 2.2 million electrochemical cells daily.