The benefits of 3D printing batteries, from safety to sustainability

Solid-state batteries substitute the fluid electrolyte layer with a solid

The non-flammable solid greatly reduces the risk of fire and explosion, as well as the release of toxic gases via leaks in the existing sulfide-based systems. These batteries use garnet-type solid electrolytes, which provide high ionic conductivity and chemical stability but require temperatures above 1,000 degrees Celsius (1,800 degrees Fahrenheit) for fabrication.

The abundance of raw materials may lead to sodium replacing lithium in batteries

Lower risks of thermal runaway, which can lead to fires and explosions, and less energy capacity loss at low temperatures support the shift. However, sodium's greater weight and lower energy density compared to lithium have made it best suited for stationary storage applications. (Some readers may experience a paywall.)

As of 2022, only about 5% of lithium-ion batteries are recycled globally

Traditional recycling methods have been inadequate for lithium batteries, prompting manufacturers to explore more sustainable battery designs, alongside robotic disassembly and ultrasonic techniques to improve recycling rates. Studies have shown that mining for new lithium requires significantly more water and energy than recycling and results in declining vegetation near mines.

Explore options for recycling batteries

Improper battery disposal can lead to fires and the leaching of harmful chemicals and toxic materials into local soil and water systems. Although many batteries contain metals that can be recycled with less energy than it takes to produce them, variability in regulations across municipalities and states can complicate efforts. (Some readers may experience a paywall.)

Lithium-ion batteries are the standard for rechargeable devices

The costly setup of new mining operations and challenges with recycling amid growing demand have led researchers to search for alternatives, including sodium-ion, solid-state, and lithium-sulphur batteries, despite challenges with scalability.

Growing EV adoption requires battery management infrastructure

Despite rechargeable batteries' limited life cycle, companies like Spiers New Technologies have developed methods to repair, refurbish, repurpose and recycle these components to minimize environmental waste, lower demand for new critical minerals, and increase electric vehicle lifetimes.

During manufacturing, lithium-ion and alkaline batteries are tested for short-circuiting

Lithium-ion batteries are made by manufacturing anodes, cathodes, and electrolytes via chemical processes, assembling these components into cells, and enclosing multiple interconnected cells within a protective casing. Disposable alkaline battery production involves filling steel containers with preforms—rings of powdered cathode material—paper-based separators, electrolyte solution, and an anode gel.

Legacy electronics have prevented significant advancements in alkaline batteries

While lithium-ion batteries have increased in energy density multiple times since their commercialization in 1991 and can be sized to various capacities by connecting numerous electrochemical cells, disposable alkaline batteries have been forced to maintain their 1.5-volt standard and form factors for compatibility with existing devices.

Lithium can store and deliver substantial energy for its cost and weight

When exploring which compounds would be best suited for batteries, scientists sought elements that were relatively inexpensive to mine, readily available, and that provided high energy density—how much chemical energy an element could store for its size. Lithium-ion batteries provide these benefits and discharge at very low rates when unused.

How to safely dispose of every kind of battery

As lithium-ion batteries have proliferated in phones, e-bikes, power tools, and dozens of other devices, improper disposal has become a leading cause of fires in recycling facilities and garbage trucks. Battery Safety Now partnered with the US Forest Service's Woodsy Owl campaign to provide guidance on how to recycle batteries by type, including locator tools for drop-off sites.

Watch how metals are extracted from rechargeable devices during recycling

Recyclable batteries found in cars, phones, power tools, and other electronics contain lithium, cobalt, nickel, and other precious metals, whose reuse generates 70% fewer emissions than during their initial mining. Upon shredding these devices, a filter press squeezes the pieces through a proprietary fluid, which separates them for future reuse.

Genetically modified viruses can help construct battery electrodes

MIT scientists' modifications caused the viruses to attract conductive materials, such as gold ions, which the viruses self-assembled into nanowires that could be used in batteries. These components allow batteries to be thinner and flexible enough to be constructed into new shapes.

How 3D printing inside cells paves the way for microscopic machines

In 2026, scientists in Slovenia developed a method to 3D print a small elephant, several microscopic geometric objects, and barcodes for cell labeling within living human cells, which continued to grow and divide thereafter. The experiment opens the door to fabricating devices within cells to study and manipulate cellular functions.

3D printing has made musical instruments more accessible

Violins fabricated from durable plastic, rather than being built from wood, can cost hundreds of dollars less, allowing children to try them out without financial pressure. They can be made in colors that appeal to children, sizes tailored to their bodies, and with tactile guides to help visually impaired learners.

Chip-based 3D printers can be pocket-sized and involve no moving parts

Researchers have demonstrated a proof-of-concept version of a chip-based 3D printer that emits visible light onto light-sensitive resin to construct solid shapes. The technology may provide a portable, low-cost solution for future, small-scale fabrication needs.

Visualize the minerals used in a lithium-ion battery

The lithium cathode includes nickel to increase energy storage per unit volume, as well as cobalt and manganese as stabilizing agents. Anodes are composed entirely of graphite, with aluminum and copper composing the current collectors for the cathode and anode, respectively. The battery is enclosed in a steel casing.

Massive 3D printers have been used to build homes by stacking layers of 'concrete toothpaste,' a fire-resistant material that effectively insulates against outside noise.

In 2015, the FDA approved the first 3D-printed prescription tablet

Spritam, an epilepsy medication, had been too large and difficult to swallow, particularly due to its inability to dissolve easily. The new pill was designed with porous layers to enhance its dissolvability, paving the way for future 3D printing of drugs.

Sony set the standard for cylinder-shaped batteries when it repurposed manufacturing equipment used to make rolls of magnetic recording tape.

Software subscriptions, licenses, and climate control systems add to 3D printing costs

Although the sharing of designs and reduced manual labor suggested the fabrication of prosthetics would be facilitated by 3D printing, particularly in developing regions, software and hardware requirements have posed hurdles to achieving this goal. While some insurance companies have refused to cover 3D-printed limbs, they are covered by Medicare.

How lithium has become one of the world's most important elements

Lithium is the driving force behind electric vehicles as the key element in the lithium-ion batteries that power the cars. But as demand for EVs rises, will global lithium supply keep pace with demand? This report projects demand will reach up to four million metric tons of the mineral compound containing lithium by 2030, with batteries accounting for 95% of end-use applications.

The widespread need for rechargeable batteries has fueled surging lithium demand

As of 2025, the average person uses 27 times more mined lithium than they did in the 1990s, with the US ranking second globally in consumption despite producing less than 1% of global supply. However, potential alternative materials and boom-and-bust cycles have challenged the profitability of mines and future demand for the mineral.

Explore the human and environmental resources needed to make an electric vehicle

The minerals needed to build batteries for electric vehicles are expensive and often take a human toll paid by the communities where they are mined. This interactive article details what minerals make up an electric vehicle battery, where they come from, and dangers posed by the mining process.

Microgravity environments improve the success of 3D bioprinting

Gravity can cause gaps, such as those in the chambers of a 3D-printed heart, to collapse before stem cells, hydrogels, and biochemicals bind together during the bioprinting process. Rather than Earth's surface, some bioprinting is done on the International Space Station, where defective organs are also printed to test treatment methods.

Watch Apple Watch cases be 3D printed from titanium powder

Apple Watch Ultra 3 cases are 3D printed entirely from recycled, aerospace-grade titanium powder using lasers to fuse particles. Over 400 metric tons of raw titanium were saved in 2025, with two watches fabricated from the same amount of raw material that would have previously been used to make one.

Medical imaging allows 3D printers to create patient-matched devices

With imaging data on a person's anatomy, external prostheses and implants, such as cranial plates or hip joints, can be custom-printed to better match a patient's body. Fabrication of porous structures can promote bone growth, leading to longer-lasting implants.

From 1991 to 2024, lithium-ion battery cell prices have fallen by 99%

The decrease from about $10,000 to $50 per kilowatt-hour has been driven by innovations in battery chemistry, improvements in manufacturing and supply chains, and increases in global cumulative production, which have caused average price declines of 19% each time it has doubled.

Watch a tour of a battery manufacturing gigafactory

Inside Contemporary Amperex Technology Limited's facility, China's largest EV battery manufacturer uses slurry mixing, "jelly rolling," electrolyte injection, and other techniques and equipment to transform raw metals such as lithium and magnesium into approximately 2.2 million electrochemical cells daily.

How to make your own DIY ionic thruster

In the search for more efficient, sustainable types of propulsive thrust, scientists have dabbled in developing engines using ionic thrust, a type of propulsion using the attractive force of oppositely charged ions. First introduced by a Russian...

As of 2025, most EV batteries retain 95% or more of their range after three years

Data from over 30,000 electric vehicles shows that their batteries are lasting much longer than initially projected, which researchers suggest is due to improved battery management systems and real-world use often being less rigorous than high-performance testing. Cars with 150,000 miles or more that have not had a battery replacement retain at least 83% of their original range.

The 2019 Nobel Prize in Chemistry was awarded for lithium-ion battery development

Stanley Whittingham developed the first functional lithium battery in the early 1970s, while John Goodenough doubled its electrical potential in 1980 by replacing the cathode, thereby enhancing its commercial viability. Five years later, Akira Yoshino developed an anode using carbon material, reducing the risk of flammability.

Most custom earmolds for in-ear hearing aids are made using 3D printing

The technology has also been utilized for behind-the-ear and receiver-in-canal hearing aids, allowing for the creation of structures tailored to the patient's anatomy for enhanced effectiveness. 3D printing has also been used to print retinal eye cells and custom eyeglass frames.

The world's largest lemon battery was made from nearly 3,000 lemons

By connecting lemons with a piece of zinc on one side and a piece of copper on the other, a team from the Royal Society of Chemistry created a fruit battery with a capacity of 2,307.8 volts.

Prosthetics and orthotics have been 3D printed to improve the lives of animals

Shells for hermit crabs, wheelchairs for guinea pigs and dogs, and horseshoes for improved running performance have been created using 3D printers. Other artificial body parts made using this technology include a jaw for a loggerhead turtle, a beak for a toucan, and a tail for an American alligator.

Watch the iterative process of successfully printing a slice of vegan cheesecake

3D printing food requires integrating ingredients with a variety of properties, which may not all resist the physical stress of stacking. This means successful 3D printing of food may require rethinking how ingredients are layered and modifying ratios of each, potentially sacrificing taste for structural integrity.

The first lithium-ion battery was invented at ExxonMobil

Initially a side project that became a priority due to the 1973 oil crisis, the battery's flammability risks and manufacturing challenges, along with the waning crisis, led the company to shut down its battery program. Other researchers would gradually improve upon published prototype designs in the next decade.

View a timeline of 3D printing technology through 2019

The first working 3D printing device was invented in 1983 and utilized stereolithography, a process in which a laser triggers a chemical reaction that hardens liquid resin. Powder-based laser sintering technology was patented in 1987, with metal-based powders first being used for 3D printing in 1997.

Pollution from lead battery recycling has led to widespread contamination

Many small-scale operations worldwide remain unregulated, bypassing environmental regulations and causing increasing health threats, primarily to children. A 2020 report by UNICEF found that one-third of the world's children are being poisoned by lead from recycled batteries, among other sources.

3D printers can create nearly any object that can be digitally designed

Limited only by the size of the printer and the properties of the materials used for printing, fabrications, including household items, toys, props, cases, prototypes, and models, can take anywhere from fractions of an hour to several days to make, depending on design complexity, size, color changes, and printer settings.

Thermal runaway reactions can cause batteries to catch fire or explode

If a lithium-ion battery is heated, punctured, crushed, or short-circuits due to manufacturing flaws or degradation, the cathode and anode can make contact without the resistance provided by a circuit. The ensuing spike in chemical reactions increases the temperature and can release oxygen, initiating and intensifying burning of the battery's interior.

Accidental ingestion of batteries can be life-threatening

Tissue in the body can serve as a circuit path between the anode and cathode of a battery, resulting in electrical burns and gradual tissue erosion. Stomach acid can corrode a battery and cause its toxic contents to leak, making a person sick. Batteries for internal use, such as in pacemakers, require special designs.

Multi-material 3D printing produces filament waste if only one nozzle is used

When swapping between colors or materials in a fused deposition modeling system, a considerable amount of filament is purged from the nozzle before introducing a new filament. Filament extruders can create new filament from purged elements, but the device combines colors and produces filaments of inconsistent diameter.

Gradual chemical build-up reduces the effectiveness of rechargeable batteries

During charge cycles, small chemical deposits gradually form a film on the electrodes where they make contact with the electrolyte, trapping ions that would otherwise facilitate the flow of electricity. Mechanical degradation from electrode wear and electrical shorting from structural instability can also reduce battery capacity.

Batteries range in size based on their purpose, cost, and manufacturability

Lead-acid batteries used in combustion vehicles are resilient to temperature extremes, low-cost, and provide high surge current, which is needed for initial ignition. Alkaline batteries, including AA, AAA, and B, have long shelf lives and supply the low, steady power required for electronics with minimal demand fluctuations.

The most common type of 3D printer fabricates objects using plastic

At the consumer level, the most common printing method is fused deposition modeling, which builds objects by melting an extruding thermoplastic filament that is deposited in layers. For industrial applications, selective laser sintering, which uses a laser to fuse particles of polymer powder (e.g., nylon), is preferred.

Watch a time-lapse of 3D printing two pairs of eyeglasses by layering plastic filament.

View the five most expensive metals used to make batteries

Before 2021, when lithium carbonate became the most expensive metal for use in electric vehicle cathodes, cobalt was the most costly battery metal. Of the top five, copper is the only metal not used in cathodes, arguably the most important part of the battery, which determines performance, longevity, and range.

Nuclear batteries generate electrical currents using radioactive materials

Rather than using electrochemical reactions to produce the electrons that flow through a circuit, isotopes like nickel-63 undergo beta decay—emitting electrons—which a semiconducting material can absorb to establish a charge imbalance that generates current. Such batteries could provide low-power energy for decades.

Watch the engineering challenges overcome in turning a 3D printer into a tattoo machine

The DIY project required reprogramming the printer to operate on a curved, 2D surface rather than making flat layers in 3D, editing replacement firmware to bypass temperature safety checks, and developing a rapid system to stop the tattoo in case of an emergency. The final product printed "LEG" on a volunteer's leg.

More batteries in the power grid would create an on-demand energy reservoir

Most power grids are inefficient because they require enough generation capacity at all times to avoid blackouts. This means at any given time, as much as 50% of generating capacity at power plants can go unused. Batteries would reduce this inefficiency and allow for real-time adjustments.