The gradual loss of capacity in rechargeable batteries can be delayed by avoiding overnight charging, charging to 100%, fast charging, and exposing your device to excessive heat.

Gradual chemical build-up reduces the effectiveness of rechargeable batteries

During charge cycles, small chemical deposits gradually form a film on the electrodes where they make contact with the electrolyte, trapping ions that would otherwise facilitate the flow of electricity. Mechanical degradation from electrode wear and electrical shorting from structural instability can also reduce battery capacity.

Fast charging can lead to battery degradation if the device does not stay cool

Modern phones use software to monitor charging habits and can activate adaptive charging to delay charging rates and prevent overheating. When charging, devices should not be confined (e.g., stored in your pocket) or placed in direct sunlight, as this can trigger heat warnings and sudden shutdowns.

Batteries are likely to stop working sooner in cold temperatures

The electrolyte separating the cathode and anode of a battery can thicken, impeding ion flow. Lower temperatures also slow the rate of chemical reactions, further reducing battery capacity. Large draws of power, such as when using heaters, heated seats, etc., in a car during winter, exacerbate battery drain further.

Thermal runaway reactions can cause batteries to catch fire or explode

If a lithium-ion battery is heated, punctured, crushed, or short-circuits due to manufacturing flaws or degradation, the cathode and anode can make contact without the resistance provided by a circuit. The ensuing spike in chemical reactions increases the temperature and can release oxygen, initiating and intensifying burning of the battery's interior.

How to safely dispose of every kind of battery

As lithium-ion batteries have proliferated in phones, e-bikes, power tools, and dozens of other devices, improper disposal has become a leading cause of fires in recycling facilities and garbage trucks. Battery Safety Now partnered with the US Forest Service's Woodsy Owl campaign to provide guidance on how to recycle batteries by type, including locator tools for drop-off sites.

Growing EV adoption requires battery management infrastructure

Despite rechargeable batteries' limited life cycle, companies like Spiers New Technologies have developed methods to repair, refurbish, repurpose and recycle these components to minimize environmental waste, lower demand for new critical minerals, and increase electric vehicle lifetimes.

As of 2025, most EV batteries retain 95% or more of their range after three years

Data from over 30,000 electric vehicles shows that their batteries are lasting much longer than initially projected, which researchers suggest is due to improved battery management systems and real-world use often being less rigorous than high-performance testing. Cars with 150,000 miles or more that have not had a battery replacement retain at least 83% of their original range.

Legacy electronics have prevented significant advancements in alkaline batteries

While lithium-ion batteries have increased in energy density multiple times since their commercialization in 1991 and can be sized to various capacities by connecting numerous electrochemical cells, disposable alkaline batteries have been forced to maintain their 1.5-volt standard and form factors for compatibility with existing devices.

Charging an EV depends on power source, charger type and battery size

It takes less time to charge an electric vehicle's battery for Level 3 chargers, which can deliver 80% capacity in as little as 30 minutes. Level 1 chargers can take days. Larger vehicles possess larger batteries that increase charging time, despite often having less range.

Watch how metals are extracted from rechargeable devices during recycling

Recyclable batteries found in cars, phones, power tools, and other electronics contain lithium, cobalt, nickel, and other precious metals, whose reuse generates 70% fewer emissions than during their initial mining. Upon shredding these devices, a filter press squeezes the pieces through a proprietary fluid, which separates them for future reuse.

Explore options for recycling batteries

Improper battery disposal can lead to fires and the leaching of harmful chemicals and toxic materials into local soil and water systems. Although many batteries contain metals that can be recycled with less energy than it takes to produce them, variability in regulations across municipalities and states can complicate efforts. (Some readers may experience a paywall.)

As of 2022, only about 5% of lithium-ion batteries are recycled globally

Traditional recycling methods have been inadequate for lithium batteries, prompting manufacturers to explore more sustainable battery designs, alongside robotic disassembly and ultrasonic techniques to improve recycling rates. Studies have shown that mining for new lithium requires significantly more water and energy than recycling and results in declining vegetation near mines.

A battery management system determines the displayed battery percentage

The software in modern devices provides values by combining estimates based on voltage—akin to knowing how much air is left in a tire based on the pressure of the escaping air—and coulomb counting, where the rate of electrical current is calibrated to the ratio of remaining charge to full capacity.

Accidental ingestion of batteries can be life-threatening

Tissue in the body can serve as a circuit path between the anode and cathode of a battery, resulting in electrical burns and gradual tissue erosion. Stomach acid can corrode a battery and cause its toxic contents to leak, making a person sick. Batteries for internal use, such as in pacemakers, require special designs.

As much as 10% of home electricity use comes from unused devices left plugged in.

Despite electric usage concerns, EV charging accounts for less than 1% of grid load

Other popular myths about EVs include battery failure concerns—failure rates are less than 1% on newer models—and that there are no places to charge cars, though both at-home outlets and more than 77,000 stations on the road are available.

From 1991 to 2024, lithium-ion battery cell prices have fallen by 99%

The decrease from about $10,000 to $50 per kilowatt-hour has been driven by innovations in battery chemistry, improvements in manufacturing and supply chains, and increases in global cumulative production, which have caused average price declines of 19% each time it has doubled.

The widespread need for rechargeable batteries has fueled surging lithium demand

As of 2025, the average person uses 27 times more mined lithium than they did in the 1990s, with the US ranking second globally in consumption despite producing less than 1% of global supply. However, potential alternative materials and boom-and-bust cycles have challenged the profitability of mines and future demand for the mineral.

More batteries in the power grid would create an on-demand energy reservoir

Most power grids are inefficient because they require enough generation capacity at all times to avoid blackouts. This means at any given time, as much as 50% of generating capacity at power plants can go unused. Batteries would reduce this inefficiency and allow for real-time adjustments.

Lithium-ion batteries are the standard for rechargeable devices

The costly setup of new mining operations and challenges with recycling amid growing demand have led researchers to search for alternatives, including sodium-ion, solid-state, and lithium-sulphur batteries, despite challenges with scalability.

The abundance of raw materials may lead to sodium replacing lithium in batteries

Lower risks of thermal runaway, which can lead to fires and explosions, and less energy capacity loss at low temperatures support the shift. However, sodium's greater weight and lower energy density compared to lithium have made it best suited for stationary storage applications. (Some readers may experience a paywall.)

Batteries range in size based on their purpose, cost, and manufacturability

Lead-acid batteries used in combustion vehicles are resilient to temperature extremes, low-cost, and provide high surge current, which is needed for initial ignition. Alkaline batteries, including AA, AAA, and B, have long shelf lives and supply the low, steady power required for electronics with minimal demand fluctuations.

Electricity is produced when the ends of a battery are connected by a conducting wire, triggering chemical reactions that release the energy stored in chemical bonds.

Lithium can store and deliver substantial energy for its cost and weight

When exploring which compounds would be best suited for batteries, scientists sought elements that were relatively inexpensive to mine, readily available, and that provided high energy density—how much chemical energy an element could store for its size. Lithium-ion batteries provide these benefits and discharge at very low rates when unused.

During manufacturing, lithium-ion and alkaline batteries are tested for short-circuiting

Lithium-ion batteries are made by manufacturing anodes, cathodes, and electrolytes via chemical processes, assembling these components into cells, and enclosing multiple interconnected cells within a protective casing. Disposable alkaline battery production involves filling steel containers with preforms—rings of powdered cathode material—paper-based separators, electrolyte solution, and an anode gel.

Wireless charging uses a magnetic field to move charged particles in a battery

Based on the concept of electromagnetic induction, when a compatible device is placed on a charging pad with correct alignment, the alternating current flowing through the pad creates a changing magnetic field. This magnetic field induces a current in the device, recharging the battery without a connecting wire.

Water vapor is used to manage heat in high-end smartphones

While smartphones have traditionally been cooled using a highly conductive plate that dissipates heat from the chip, vapor chambers offer a higher heat-removal capacity. This technology has been utilized in laptops for decades to absorb heat by cycling a fluid between liquid and gaseous phases.

Solid-state batteries substitute the fluid electrolyte layer with a solid

The non-flammable solid greatly reduces the risk of fire and explosion, as well as the release of toxic gases via leaks in the existing sulfide-based systems. These batteries use garnet-type solid electrolytes, which provide high ionic conductivity and chemical stability but require temperatures above 1,000 degrees Celsius (1,800 degrees Fahrenheit) for fabrication.

The benefits of 3D printing batteries, from safety to sustainability

Rather than using the liquid electrolyte commonly found in lithium-ion batteries, 3D-printed batteries would use a solid layer, which can be custom-built into different shapes, deliver higher energy density by building thinner layers, and be fabricated with fewer raw materials compared to injection molding.

Pollution from lead battery recycling has led to widespread contamination

Many small-scale operations worldwide remain unregulated, bypassing environmental regulations and causing increasing health threats, primarily to children. A 2020 report by UNICEF found that one-third of the world's children are being poisoned by lead from recycled batteries, among other sources.

Tracing the evolution of mobile phones

The first cell phone was created in 1973, with a 2.4-pound handset and a battery life of about 30 minutes. Since then, pretty much everything about it has drastically changed, with more than 5 billion cellphone users across the globe (that's more than half of the world population). Learn about the evolution of the mobile phone and where the technology may go in the future with this four minute video.

Disconnecting from technology can be made easier by turning off notifications, making nonessential apps and devices harder to access, and opting for 'dumb' devices, such as a film camera.

Electricity can be lethal because it can disrupt the nervous system, which controls critical bodily functions that rely on electrical signals between cells, such as breathing and heart rate.

Battery and plug-in hybrid EVs can operate with zero tailpipe emissions

Battery electric vehicles only run on electricity, while plug-in hybrids incorporate a small internal combustion engine that recharges the battery or directly powers the wheels to improve driving range. Fuel cell electric vehicles convert hydrogen gas fuel into electricity.

During flights, cell phones can act like signal jammers as they search for service

When farther from cell towers, these devices expend more energy to emit more powerful signals, which can overwhelm any ground-based tower or radio telescope they fly past. Rather than protecting the flight, airplane mode conserves a cell phone's battery.

Visualize the minerals used in a lithium-ion battery

The lithium cathode includes nickel to increase energy storage per unit volume, as well as cobalt and manganese as stabilizing agents. Anodes are composed entirely of graphite, with aluminum and copper composing the current collectors for the cathode and anode, respectively. The battery is enclosed in a steel casing.

The first lithium-ion battery was invented at ExxonMobil

Initially a side project that became a priority due to the 1973 oil crisis, the battery's flammability risks and manufacturing challenges, along with the waning crisis, led the company to shut down its battery program. Other researchers would gradually improve upon published prototype designs in the next decade.

Our phones can provide a dopamine hit because of our positive associations with them, which feeds into what some psychologists call social media addiction.

How lithium has become one of the world's most important elements

Lithium is the driving force behind electric vehicles as the key element in the lithium-ion batteries that power the cars. But as demand for EVs rises, will global lithium supply keep pace with demand? This report projects demand will reach up to four million metric tons of the mineral compound containing lithium by 2030, with batteries accounting for 95% of end-use applications.

The 2019 Nobel Prize in Chemistry was awarded for lithium-ion battery development

Stanley Whittingham developed the first functional lithium battery in the early 1970s, while John Goodenough doubled its electrical potential in 1980 by replacing the cathode, thereby enhancing its commercial viability. Five years later, Akira Yoshino developed an anode using carbon material, reducing the risk of flammability.

Sand 'batteries' can store excess electricity from the power grid as thermal energy

Energy collected from solar or wind power is used to heat insulated silos full of sand to temperatures as high as 450 degrees Celsius (842 degrees Fahrenheit), which can be retained for long periods. These thermal energy storage systems can be designed to boil water and generate electricity when needed.

Benjamin Franklin described a series of static electricity storage jars as 'batteries'

Discovered over 50 years before the first electrochemical cell was invented, Leyden jars stored electric charge between the metals inside and outside a liquid-filled container. Franklin was the first to use the term "battery" in an electrical sense, though his multiple-jar device—lacking chemical reactions—was actually a series of capacitors.

Sony set the standard for cylinder-shaped batteries when it repurposed manufacturing equipment used to make rolls of magnetic recording tape.

Electric vehicles have been around since the 19th century

The first EVs ran on rechargeable lead-acid batteries, which could travel 60 to 80 miles on a single charge. Women preferred these vehicles, which were quieter, less smelly, and did not require turning a hand crank to start the engine.

Most advanced touch screens rely on electrical charge in your skin

Capacitive touch screens store electrical charges in an electrostatic grid of tiny wires. When we touch the screen a tiny electrical charge is transferred from the screen to the finger to complete a circuit (since skin has positive and negative charges). This connection creates a voltage drop on that point of the screen. Cloth, however, doesn't conduct electricity, which is why humans can't wear thick gloves and operate their smartphones.

View the five most expensive metals used to make batteries

Before 2021, when lithium carbonate became the most expensive metal for use in electric vehicle cathodes, cobalt was the most costly battery metal. Of the top five, copper is the only metal not used in cathodes, arguably the most important part of the battery, which determines performance, longevity, and range.

The world's largest lemon battery was made from nearly 3,000 lemons

By connecting lemons with a piece of zinc on one side and a piece of copper on the other, a team from the Royal Society of Chemistry created a fruit battery with a capacity of 2,307.8 volts.

Nuclear batteries generate electrical currents using radioactive materials

Rather than using electrochemical reactions to produce the electrons that flow through a circuit, isotopes like nickel-63 undergo beta decay—emitting electrons—which a semiconducting material can absorb to establish a charge imbalance that generates current. Such batteries could provide low-power energy for decades.

Heatstroke can reprogram your DNA, putting survivors at risk of future health problems.

Metabolism, a collection of chemical reactions at the cellular level, processes food and converts it into energy to power the body.