Due to their enormous size, wind turbines are assembled on-site using prefabricated components, advanced cranes, and vibration-damping systems to withstand the dynamic ocean environment.

Wind energy is categorized into land-based, distributed, and offshore types

Distributed wind turbines efficiently serve on-site energy needs, while land-based turbines are large and generate cost-competitive electricity. Offshore wind turbines capture powerful winds above the ocean and may be pounded into the seafloor using pile drivers or built to float above water at scales larger than the Statue of Liberty.

Wind turbines explained

Wind turbines have powered homes since 1887, and today they’re stronger, quieter, and more reliable than ever. Offshore wind could power millions and grow fast enough to meet climate goals.

Fiberglass and epoxy resin on blades complicate the recycling of wind turbines

Between 85 and 95% of a turbine's materials—except for the blades—can be recycled. Blades have been left in landfills when not repurposed into playgrounds and sheds, but new processes may allow them to be made into pellets for injection plastics and concrete.

Engineering tall structures requires managing wind, earthquakes, and other destabilizing factors

Reinforced concrete, energy dampers, braced frames, flexible structures, and aerodynamic decks were among the methods implemented when building structures such as the Shanghai Tower, the Texas Super Skyscraper, and the South Rangitīkei Viaduct.

Explore an interactive graphic of a wind turbine's components

Wind turbines contain a gearbox that increases the rotation of the blades by a factor of 100 from low to high-speed shafts. The latter moves magnets that change the magnetic field within a generator, creating electricity.

Carbon-neutral data centers may be possible if built within wind turbines

Wind turbine towers are typically hollow, housing only cables and a ladder for maintenance access. The excess electricity a wind turbine collects could power a stack of server racks more than 100 meters (328 feet) high within its tower.

Technological advancements will make future wind turbines more efficient and quieter

Manufacturing larger, more powerful turbines will result in future wind farms requiring fewer of them to meet energy demands. Larger turbines will meet these demands while rotating at lower speeds, reducing risks to avian wildlife.

Selection of wind farm sites considers wildlife impacts and wind resource potential

Environmental impact studies, wind energy maps, anemometer data, and local, state, and federal regulations factor into wind farm projects, including offshore farms. Wind projects on public lands require additional permitting.

From 1990 to 2020, wind turbine height and blade length have more than tripled

Wind turbines' energy generation capacity—or maximum power rating—also increased by 375% from 1998 to 2023. As of that year, wind turbines can produce more energy per dollar than solar panels, though transportation and installation challenges remain.

Wind energy 101

Learn more about the wind industry, from how a wind turbine works, to the new and exciting research in the field of wind energy.

Maintenance, curtailment, congestion, and wind speed can park a wind turbine

Wind turbines are optimized to operate at wind speeds between about 10 and 80 kph, but an internal brake stops them if energy is not required. Routine preventative maintenance and cleaning also prevent blades from rotating.

See technicians use rappelling gear to make wind turbine repairs from 35+ stories up

Although drones are used to conduct initial reviews from the ground, mechanical engineers trained in turbine maintenance face extreme risks during close inspections more than 150 meters off the ground.

View a distribution of wind turbine locations across the US

As of May 2025, the US Wind Turbine Database maps and provides technical specifications for 76,051 onshore and offshore turbines from 1,794 projects, ranging from small installations to large-scale wind farms.

For the same cost, turbines with three blades are the most resilient

Odd-numbered blade values more evenly distribute wind loads across the face of rotors, reducing bending and twisting forces on the turbine that cause wear. Modeling shows that three blades optimize efficiency and cost for everyday wind speeds.

Wind farms are targets for conspiracy theories due to their visibility and complexity

The proliferation of misinformation and conspiracy theories surrounding wind farms is driven by deep-seated anxieties about change, distrust of government, and resistance to confronting the complexities of modern energy solutions.

Establishing the wind power grid required incentives, reliability, and affordability

Although wind was harnessed to generate electricity for individual buildings in the late 1800s, high costs, mechanical issues with turbines, and better fossil-fuel alternatives delayed wind power's widespread growth. After the oil crises of the 1970s, governments sought alternative energy sources and, in the decades that followed, provided tax credits to expand the wind power market.

The carbon footprint of manufacturing a wind turbine is offset within seven months

Despite initial carbon emissions during manufacturing, wind turbines generate nearly zero pollution across their 20- to 25-year lifetimes. Offsets occur when turbines replace energy generation from coal and natural gas plants, which emit carbon dioxide.

Small elevation differences drastically protect homes in hurricanes

The construction of seaside homes has long involved building residences on elevated stilts, but this feature adds costs—and some elevated homes still fail. Explore the engineering behind the ideal height of a hurricane-proof building.

Some renewable energy sources may weaken the resiliency of electric grids by removing outage buffers provided by coal- and natural gas-fired plants, which provide the system with more time to find a new power source if a plant goes down.

Windmills can be designed to pump groundwater for irrigation or land drainage

A gearbox within the windmill converts the windmill's rotation into the vertical motion of a piston that pushes water up a pipe. It also drives the rotation of an Archimedes screw to move water to higher elevations.

Wind helps trees develop resistance to collapse

Scientists at Biosphere 2 found that trees grew faster in the facility than those in the wild but collapsed more quickly when replanted outdoors. Researchers uncovered that trees build resistance when pushed and pulled due to wind stress, strengthening their foundational root systems.

As of 2025, wave power projects remain in early research and testing phases

Waves can become a steady source of renewable energy because they do not pause like wind and solar power do. However, funding gaps and the effects of storms, salt exposure, and biofouling—mussels and other sea creatures attaching to wave machines—have presented challenges in scaling the technology beyond testing sites.

Decommissioned oil rigs have been repurposed into artificial reefs that serve as nursery habitats for fish, corals, sponges, and other invertebrates in the decades since their installation.

Wave tanks can be used to create and study the impacts of tsunamis by building tension in an underwater object before allowing it to slip and rapidly displace water.

High-altitude kites can perform airborne collection of energy from high-speed winds

Winds at high altitude are stronger and more consistent than those near Earth's surface, where natural and artificial barriers disrupt airflow. Kites pulled by the wind can extend a tether like a yo-yo, creating electricity in an attached ground generator.

Why decarbonizing the entire electric grid is impossible with its current infrastructure

Fossil fuel plants can be built anywhere and have thus typically been built near highly populated areas, such as coastal cities, where electricity demand is high. However, certain renewable resources operate most efficiently in specific regions, such as wind turbines in the Midwest, and therefore require substantial transmission infrastructure to be constructed to transport the generated electricity.

Agricultural land remains mostly unchanged after wind projects

From 2012 to 2020, less than 0.05% of available US farmland had commercial wind turbines installed. More than 95% of this land lacks wind farm structures such as turbine pads or roads, leaving most cropland and pasture-rangeland unchanged.

Techniques to earthquake-proof a building include the use of counterweights, such as a massive column or pendulum, to dampen the impact of seismic activity and isolating a building's structure from its base.

Why Water Towers Are Built This Way

Climate resilience strategies, which help communities mitigate the effects of climate change, include painting roofs white, building clam gardens, harvesting fog, and feeding cows seaweed.

Wind is the movement of air caused by the sun's uneven heating of Earth

The tilt, curvature, and variations in Earth's surface composition across the globe cause different regions to receive different amounts of solar radiation. As the Earth spins and tries to achieve thermal equilibrium, air masses move and interact, creating wind.

Hurricane conditions are created in a University of Miami wind-wave tank

The SUrge-STructure-Atmosphere INteraction Wind Wave Laboratory contains a 38,000-gallon wave pool connected to a wind tunnel that can generate air currents of up to 155 mph. SUSTAIN allows scientists to study how the atmosphere interacts with the ocean in extreme weather.

Wind turbines are limited to capturing no more than 59.3% of incoming wind energy

In 1919, German physicist Albert Betz applied the laws of conservation of mass and momentum to airstreams to calculate the theoretical limit. However, real-world turbines only convert 35 to 45% of available wind energy into electricity.

Sand 'batteries' can store excess electricity from the power grid as thermal energy

Energy collected from solar or wind power is used to heat insulated silos full of sand to temperatures as high as 450 degrees Celsius (842 degrees Fahrenheit), which can be retained for long periods. These thermal energy storage systems can be designed to boil water and generate electricity when needed.

Stonehenge was built using giant wooden rollers and precisely carved tongue-and-groove joints to lock the stones in place.

This short animation shows how human beings managed to lug 30-ton stones over miles of prehistoric English countryside and stand them up The Stone Age engineering involved using giant wooden rollers and carving precisely interlocking tongue-and-groove joints to hold the heavy stones in place.

The risk of tornadoes and storm surges is greatest on the 'dirty side' of a hurricane

Winds in the right-front quadrant of the storm are amplified by the hurricane's motion and its rotation, which both move air in the same direction. Upon making landfall, these winds pull water from the Gulf and Atlantic onto land, creating storm surges. Tornadoes can also be generated from large differences in wind speed and direction at various heights.

Window collisions and cats kill more birds than wind turbine farms

Researchers are developing solutions to reduce bird fatalities due to wind turbine farms, including radar systems integrating AI to detect birds and shut down systems. Painting blades with various patterns is also being tested, which may reduce bird strikes by 70%.

The floating homes of Holland

Floating communities like Schoonschip in Amsterdam are offering a novel approach to combat climate change-induced flooding. With sea levels rising and storms becoming more intense, these floating neighborhoods are providing a sustainable flood defense solution. Learn how they work here.

Various types of tornadoes are distinguished by their shape, size, and location

Waterspouts form over water as long, thin columns of mist and air, while elephant trunks are tornadoes that elongate vertically as they become tilted during their formation, resembling the mammal's appendage. Wedge tornadoes are among the most powerful, often spanning a mile or more in width.

Infrastructure built to limit tsunami damage includes channels to divert water, floodgates, and seawalls, such as the approximately 400-kilometer (249-mile) wall built in Japan after the 2011 Tōhoku earthquake and tsunami.

Small modular reactors can provide nuclear power with reduced risks and logistics

Their factory-built design allows them to be quickly installed underground, reducing their exposure to future extreme weather. They can provide power to small towns and major cities with much smaller start-up costs and reduced siting requirements.

Watch a time-lapse of the construction of a data center

After the external structure of a data center is built, cooling systems are installed, followed by interior offices and other rooms. Before installing racks of servers and other equipment, floors are raised beneath where they will be installed to create space for cold fluid to be pumped into the hardware and to facilitate cable management.

How do hurricanes form?

Tropical cyclones, also called hurricanes and typhoons, cause catastrophic damage when they strike land. This four-minute video explores the life cycle of cyclones—how atmospheric conditions, ocean temperatures, and the Earth's rotation combine to create them, and how they are driven by winds and eventually weaken after moving over land.

Rather than being triggered by a massive displacement of water from a geological event, meteotsunamis are caused by rapid changes in air pressure from fast-moving weather systems.

Geothermal power plants can provide large-scale energy storage for other systems

These facilities can store excess energy from solar and wind power as hot water or steam, which can be used to run turbines to generate electricity when other renewable energy sources are unavailable. Simulations have found efficiencies of 90% during a storage-use cycle, making it comparable to lithium-ion batteries.

A guide to crude oil and natural gas extraction, from rig site preparation to land restoration

Requirements for traffic plans, access roads, and noise barriers vary by state and local laws, but once the rig site is prepared, the rig is assembled and digs a well that is then encased in steel and cement to protect groundwater reservoirs. After drilling and testing the extraction pipe, fracking fluid is injected into the rock to create cracks where crude oil resides, allowing it to be pumped out.

Solar panel manufacturing begins with silicon extracted from sand

The silicon is purified and shaped into wafers less than 0.2 millimeters thick, coated and connected through a criss-cross pattern of narrow and wider metal, followed by multiple rounds of lamination before bonding to a weatherproof panel.

The engineering underlying the electric grid and why it needs to be modernized

The system includes generators for producing electricity and millions of miles of transmission and distribution lines to transport the energy. The substantial increase in the number of electronic devices and electrical demand since the construction of much of the grid in the mid-1900s has strained infrastructure, requiring continuous upgrades and massive investments in new construction.

Deep water corals—located throughout the world's ocean basins at depths beyond 200 meters (660 feet)—slowly build small coral gardens in the dark with the help of underwater worms.

Understanding the power grid and how renewable sources fit in

The power grid is evolving to include ever-higher levels of solar and wind, which don't provide inertia. Should system planners and operators panic?