For the same cost, turbines with three blades are the most resilient

From 1990 to 2020, wind turbine height and blade length have more than tripled

Wind turbines' energy generation capacity—or maximum power rating—also increased by 375% from 1998 to 2023. As of that year, wind turbines can produce more energy per dollar than solar panels, though transportation and installation challenges remain.

Technological advancements will make future wind turbines more efficient and quieter

Manufacturing larger, more powerful turbines will result in future wind farms requiring fewer of them to meet energy demands. Larger turbines will meet these demands while rotating at lower speeds, reducing risks to avian wildlife.

Wind turbines are limited to capturing no more than 59.3% of incoming wind energy

In 1919, German physicist Albert Betz applied the laws of conservation of mass and momentum to airstreams to calculate the theoretical limit. However, real-world turbines only convert 35 to 45% of available wind energy into electricity.

Maintenance, curtailment, congestion, and wind speed can park a wind turbine

Wind turbines are optimized to operate at wind speeds between about 10 and 80 kph, but an internal brake stops them if energy is not required. Routine preventative maintenance and cleaning also prevent blades from rotating.

Explore an interactive graphic of a wind turbine's components

Wind turbines contain a gearbox that increases the rotation of the blades by a factor of 100 from low to high-speed shafts. The latter moves magnets that change the magnetic field within a generator, creating electricity.

Fiberglass and epoxy resin on blades complicate the recycling of wind turbines

Between 85 and 95% of a turbine's materials—except for the blades—can be recycled. Blades have been left in landfills when not repurposed into playgrounds and sheds, but new processes may allow them to be made into pellets for injection plastics and concrete.

Wind turbines explained

Wind turbines have powered homes since 1887, and today they’re stronger, quieter, and more reliable than ever. Offshore wind could power millions and grow fast enough to meet climate goals.

Wind energy is categorized into land-based, distributed, and offshore types

Distributed wind turbines efficiently serve on-site energy needs, while land-based turbines are large and generate cost-competitive electricity. Offshore wind turbines capture powerful winds above the ocean and may be pounded into the seafloor using pile drivers or built to float above water at scales larger than the Statue of Liberty.

Due to their enormous size, wind turbines are assembled on-site using prefabricated components, advanced cranes, and vibration-damping systems to withstand the dynamic ocean environment.

Window collisions and cats kill more birds than wind turbine farms

Researchers are developing solutions to reduce bird fatalities due to wind turbine farms, including radar systems integrating AI to detect birds and shut down systems. Painting blades with various patterns is also being tested, which may reduce bird strikes by 70%.

The carbon footprint of manufacturing a wind turbine is offset within seven months

Despite initial carbon emissions during manufacturing, wind turbines generate nearly zero pollution across their 20- to 25-year lifetimes. Offsets occur when turbines replace energy generation from coal and natural gas plants, which emit carbon dioxide.

Carbon-neutral data centers may be possible if built within wind turbines

Wind turbine towers are typically hollow, housing only cables and a ladder for maintenance access. The excess electricity a wind turbine collects could power a stack of server racks more than 100 meters (328 feet) high within its tower.

Wind energy 101

Learn more about the wind industry, from how a wind turbine works, to the new and exciting research in the field of wind energy.

Establishing the wind power grid required incentives, reliability, and affordability

Although wind was harnessed to generate electricity for individual buildings in the late 1800s, high costs, mechanical issues with turbines, and better fossil-fuel alternatives delayed wind power's widespread growth. After the oil crises of the 1970s, governments sought alternative energy sources and, in the decades that followed, provided tax credits to expand the wind power market.

Turbulence is needed to make airplanes more stable and golf balls fly farther

Vortex generators—small fins placed along airplane wings—create small eddies that prevent airflow separation, maintaining lift and preventing stalls. Golf balls have dimples that create a turbulent boundary layer on their surface, minimizing drag forces.

Some renewable energy sources may weaken the resiliency of electric grids by removing outage buffers provided by coal- and natural gas-fired plants, which provide the system with more time to find a new power source if a plant goes down.

Wind farms are targets for conspiracy theories due to their visibility and complexity

The proliferation of misinformation and conspiracy theories surrounding wind farms is driven by deep-seated anxieties about change, distrust of government, and resistance to confronting the complexities of modern energy solutions.

Airplanes generate enough lift to fly by accelerating air faster over their moving wings, which makes the pressure above the wings lower than the pressure below.

View a distribution of wind turbine locations across the US

As of May 2025, the US Wind Turbine Database maps and provides technical specifications for 76,051 onshore and offshore turbines from 1,794 projects, ranging from small installations to large-scale wind farms.

Engineering tall structures requires managing wind, earthquakes, and other destabilizing factors

Reinforced concrete, energy dampers, braced frames, flexible structures, and aerodynamic decks were among the methods implemented when building structures such as the Shanghai Tower, the Texas Super Skyscraper, and the South Rangitīkei Viaduct.

In a tornado outbreak, a single severe weather system can spawn multiple twisters

By maintaining the ingredients for tornadoes—differences in wind speed and direction across altitudes, moisture, and rising air—for long periods of time as it moves across a region, a severe thunderstorm can continuously produce tornadoes by lifting multiple columns of horizontally rotating air.

Wind helps trees develop resistance to collapse

Scientists at Biosphere 2 found that trees grew faster in the facility than those in the wild but collapsed more quickly when replanted outdoors. Researchers uncovered that trees build resistance when pushed and pulled due to wind stress, strengthening their foundational root systems.

See technicians use rappelling gear to make wind turbine repairs from 35+ stories up

Although drones are used to conduct initial reviews from the ground, mechanical engineers trained in turbine maintenance face extreme risks during close inspections more than 150 meters off the ground.

Using wind tunnels, the brothers corrected a centuries-old error used to measure lift

When their early gliders failed, the Wright brothers scrutinized inherited data analysis. Smeaton’s coefficient had been used to calculate the density of air (0.005) for centuries. The Wright’s data validation through the use of small, laboratory wind tunnels showed the correct number was 0.0033.

Windmills can be designed to pump groundwater for irrigation or land drainage

A gearbox within the windmill converts the windmill's rotation into the vertical motion of a piston that pushes water up a pipe. It also drives the rotation of an Archimedes screw to move water to higher elevations.

Understanding the power grid and how renewable sources fit in

The power grid is evolving to include ever-higher levels of solar and wind, which don't provide inertia. Should system planners and operators panic?

Agricultural land remains mostly unchanged after wind projects

From 2012 to 2020, less than 0.05% of available US farmland had commercial wind turbines installed. More than 95% of this land lacks wind farm structures such as turbine pads or roads, leaving most cropland and pasture-rangeland unchanged.

Tornado formation relies on wind shear to create a tube of rotating air

Once a horizontal vortex is created by air circulating between winds of different directions and speeds, an updraft, such as those seen in powerful thunderstorms, tilts the vortex vertically. The updraft then strengthens the vortex, which becomes a tornado upon touching the ground.

Visualize how alternating currents—electricity that periodically changes direction—are generated by rotating magnetic fields, as occurs in turbine-generator systems.

The average electric vehicle motor has about 20 moving parts

The simpler design significantly reduces the energy lost to heat compared to the approximately 2,000 parts in a gas-powered car. Pollution is also lower, though an EV's emission profile is only as clean as the electric utility it's plugged into.

Unlike hurricanes, tornadoes are not ranked based on measured wind speed

Technological limitations prevent direct measurements of wind speeds where tornadoes make contact with the ground. Instead, the Enhanced Fujita scale assigns a rating with a range of speeds based on how much damage a tornado caused to various types of structures. These types are more extensive than the original Fujita scale.

Explore the effects of tornadoes of different scales

In this simulation, users can adjust the tornado's diameter and rotation speed to see its impact as it passes through a series of trees and a one-story home.

Wind is the movement of air caused by the sun's uneven heating of Earth

The tilt, curvature, and variations in Earth's surface composition across the globe cause different regions to receive different amounts of solar radiation. As the Earth spins and tries to achieve thermal equilibrium, air masses move and interact, creating wind.

Selection of wind farm sites considers wildlife impacts and wind resource potential

Environmental impact studies, wind energy maps, anemometer data, and local, state, and federal regulations factor into wind farm projects, including offshore farms. Wind projects on public lands require additional permitting.

High-altitude kites can perform airborne collection of energy from high-speed winds

Winds at high altitude are stronger and more consistent than those near Earth's surface, where natural and artificial barriers disrupt airflow. Kites pulled by the wind can extend a tether like a yo-yo, creating electricity in an attached ground generator.

Pilots are familiar with multiple types of turbulence, each with varying severity

Each type is defined based on what disrupts airflow in the atmosphere, including thunderstorms, mountains, and wakes produced by aircraft that previously took off. Pilots classify turbulence as light, moderate, severe, or extreme based on how it affects aircraft movement.

Tornado myths include suggestions to hide beneath a bridge or to open windows

Winds can accelerate due to a tunneling effect as they pass under a structure, making seeking shelter from a tornado in a mobile home or recreational vehicle highly discouraged. Significant tornado damage results from debris being picked up and hurled by strong winds, making it unsafe to be near windows that may shatter.

As of 2022, just 0.5% of installed renewable energy capacity worldwide is geothermal

Despite being able to generate electricity regardless of the weather, solar (28%) and wind (27%) are far more prevalent, primarily because of their lower upfront costs. Geothermal plants use 88% less space than solar farms to produce the same energy, but have been restricted to geologically active regions.

Running a ribbon around the edge of a blade creates curls because it stretches its outer side beyond the yield—the limit at which a material can be deformed but still return to its original shape once the force is removed.

Turbulence has been called the most important unsolved problem in classical physics

Despite being the most common type of fluid flow in our world, scientists have struggled to model turbulent flow accurately. Though behaving unpredictably, understanding inertia and viscosity can help determine whether turbulence will occur.

The turbulence experienced in airplanes results from unexpected changes in airflow

Pilots rely on forecasts, onboard tools, and air traffic control to avoid regions of severe turbulence during flight. Turbulence is generally weaker for those sitting in the front of the main cabin and for morning flights that follow cooler nighttime temperatures.

Among renewable sources, geothermal rivals hydropower in lifetime cost

As of 2024, the levelized cost of energy—the average cost per unit of energy over the lifetime of a power plant—for geothermal power is surpassed only by solar photovoltaic and onshore wind. Geothermal's LCOE has remained relatively unchanged since 2007, with significant decreases held back by significant upfront installation costs.

The 1910 Wright Model B was the brother’s most successful aircraft

The model, built from 1910 to 1914, was the first designed to be constructed in bulk, with four built each month in 1911 and 1912. The two-seater was used in exhibition flights and training for some of the earliest uses of airplanes in military contexts.

As of 2025, wave power projects remain in early research and testing phases

Waves can become a steady source of renewable energy because they do not pause like wind and solar power do. However, funding gaps and the effects of storms, salt exposure, and biofouling—mussels and other sea creatures attaching to wave machines—have presented challenges in scaling the technology beyond testing sites.

The next generation of gravitational wave detectors may include a triangular design

The Einstein Telescope will use three pairs of underground detectors—each with arms separated by 60 degrees—arranged in an equilateral triangle. The European observatory will work alongside the Cosmic Explorer, a pair of new US detectors, to provide an eightfold increase in sensitivity over LIGO and extend the current detection frequency range.

Their 1901 Wind Tunnel system revolutionized the study of aeronautics

Only the second to be built in the US, the wind tunnel allowed the brothers to study how air moves around more than 200 different wing shapes. This data helped them refine a key math equation, long held as the standard, that had been based only on one wing shape.

While gas-powered engines typically have 2,000 moving parts, electric vehicles have about 20.

Larger shares of solar power generation produce larger energy demand curves

Because solar energy is only available during daylight hours, transitioning an electric grid to solar requires significant ramp-ups and ramp-downs of other energy sources during mornings and evenings to compensate. Widespread adoption of affordable energy storage solutions can soften these curves.

Various types of tornadoes are distinguished by their shape, size, and location

Waterspouts form over water as long, thin columns of mist and air, while elephant trunks are tornadoes that elongate vertically as they become tilted during their formation, resembling the mammal's appendage. Wedge tornadoes are among the most powerful, often spanning a mile or more in width.

Hurricanes are classified according to their maximum sustained wind speed

The Saffir-Simpson Hurricane Wind Scale is a rating system that organizes hurricanes into one of five categories. Categories three and higher are classified as major hurricanes, but all categories can produce deadly storm surges and rain-induced floods.