Windmills can be designed to pump groundwater for irrigation or land drainage

Explore an interactive graphic of a wind turbine's components

Wind turbines contain a gearbox that increases the rotation of the blades by a factor of 100 from low to high-speed shafts. The latter moves magnets that change the magnetic field within a generator, creating electricity.

In osmotic power systems, the natural movement of water from regions of low to high salt concentration is used to generate electricity from pressurized water.

Geothermal power can generate electricity and provide direct heating for homes

By drilling several kilometers through penetrable rock, wells can access highly pressurized groundwater warmed by thermal energy trapped beneath Earth's surface. This water can be turned into steam to create electricity in generators. Heating systems several meters deep can pump fluid underground before circulating it through buildings.

Why Water Towers Are Built This Way

Wind turbines explained

Wind turbines have powered homes since 1887, and today they’re stronger, quieter, and more reliable than ever. Offshore wind could power millions and grow fast enough to meet climate goals.

Wind energy is categorized into land-based, distributed, and offshore types

Distributed wind turbines efficiently serve on-site energy needs, while land-based turbines are large and generate cost-competitive electricity. Offshore wind turbines capture powerful winds above the ocean and may be pounded into the seafloor using pile drivers or built to float above water at scales larger than the Statue of Liberty.

Due to their enormous size, wind turbines are assembled on-site using prefabricated components, advanced cranes, and vibration-damping systems to withstand the dynamic ocean environment.

Some geothermal power plants make electricity using a secondary fluid

Direct dry-steam systems pull underground steam into a turbine-generator system, while flash and double-flash cycle systems spray extracted liquid water into a low-pressure tank, causing it to rapidly vaporize—"flash"—before moving to the turbine. Binary cycle systems use the extracted steam and water to flash a second fluid that easily boils, which then drives the turbine.

Visualize how alternating currents—electricity that periodically changes direction—are generated by rotating magnetic fields, as occurs in turbine-generator systems.

Sand 'batteries' can store excess electricity from the power grid as thermal energy

Energy collected from solar or wind power is used to heat insulated silos full of sand to temperatures as high as 450 degrees Celsius (842 degrees Fahrenheit), which can be retained for long periods. These thermal energy storage systems can be designed to boil water and generate electricity when needed.

See technicians use rappelling gear to make wind turbine repairs from 35+ stories up

Although drones are used to conduct initial reviews from the ground, mechanical engineers trained in turbine maintenance face extreme risks during close inspections more than 150 meters off the ground.

Wind energy 101

Learn more about the wind industry, from how a wind turbine works, to the new and exciting research in the field of wind energy.

Geothermal power plants can provide large-scale energy storage for other systems

These facilities can store excess energy from solar and wind power as hot water or steam, which can be used to run turbines to generate electricity when other renewable energy sources are unavailable. Simulations have found efficiencies of 90% during a storage-use cycle, making it comparable to lithium-ion batteries.

Technological advancements will make future wind turbines more efficient and quieter

Manufacturing larger, more powerful turbines will result in future wind farms requiring fewer of them to meet energy demands. Larger turbines will meet these demands while rotating at lower speeds, reducing risks to avian wildlife.

High-altitude kites can perform airborne collection of energy from high-speed winds

Winds at high altitude are stronger and more consistent than those near Earth's surface, where natural and artificial barriers disrupt airflow. Kites pulled by the wind can extend a tether like a yo-yo, creating electricity in an attached ground generator.

Wind is the movement of air caused by the sun's uneven heating of Earth

The tilt, curvature, and variations in Earth's surface composition across the globe cause different regions to receive different amounts of solar radiation. As the Earth spins and tries to achieve thermal equilibrium, air masses move and interact, creating wind.

Wind turbines are limited to capturing no more than 59.3% of incoming wind energy

In 1919, German physicist Albert Betz applied the laws of conservation of mass and momentum to airstreams to calculate the theoretical limit. However, real-world turbines only convert 35 to 45% of available wind energy into electricity.

The Alhambra’s medieval water system powered a palace-city

Built over centuries by Islamic rulers in medieval Spain, the Alhambra used canals and pressurized tanks to move water throughout the complex. Its sophisticated system supplied fountains, baths, and gardens, showcasing advanced medieval engineering.

Establishing the wind power grid required incentives, reliability, and affordability

Although wind was harnessed to generate electricity for individual buildings in the late 1800s, high costs, mechanical issues with turbines, and better fossil-fuel alternatives delayed wind power's widespread growth. After the oil crises of the 1970s, governments sought alternative energy sources and, in the decades that followed, provided tax credits to expand the wind power market.

Niagara's flow is changed artificially to accommodate tourists and power generation

The natural wonder is also the site of great engineering feats, from the Welland Dam that first allowed ships to travel from the upper lakes to the St. Lawrence Seaway, to one of the first hydroelectric dams.

When users prompt AI chatbots, both cooling systems that support data centers and power plants that rely on steam cycles to generate electricity for data centers contribute to water use.

Enhanced geothermal power systems can trigger earthquakes by injecting fluid into rock, increasing subterranean pressure.

Airplanes generate enough lift to fly by accelerating air faster over their moving wings, which makes the pressure above the wings lower than the pressure below.

Fracking technology can help make geothermal power possible almost everywhere

Generating electricity from Earth's thermal energy has previously required existing underground reservoirs of hot water and permeable rocks through which the fluid naturally escapes. Today, fractures can be artificially created to form fluid pathways, and surface water can be injected underground and brought back to the surface.

Learn how aquifers and wells provide the largest reserves of accessible freshwater on Earth

Roughly a third of Earth's freshwater is stored underground in aquifers—permeable and porous rock formations where water naturally flows from the Earth's surface and accumulates. About half of this groundwater is accessed through wells, a feat of engineering used for thousands of years.

Ingenuity and advanced engineering have allowed trains to overcome extreme landscapes

The Jungfrau Railway utilizes electric trains powered by hydroelectric energy to ascend the Swiss Alps, while Poland's Elbląg Canal hauls ships along cable-powered tracks driven by waterwheels. Germany's Wuppertal monorail navigates bends as it glides over a river valley, and New Mexico's Holloman High-Speed Test Track can achieve speeds of Mach 8.6 for rocket sleds.

Turbulence is needed to make airplanes more stable and golf balls fly farther

Vortex generators—small fins placed along airplane wings—create small eddies that prevent airflow separation, maintaining lift and preventing stalls. Golf balls have dimples that create a turbulent boundary layer on their surface, minimizing drag forces.

The Wright Flyer was an engineering breakthrough, and modern aircraft still use the same principles of flight.

The dynamo theory explains how planets generate their own magnetic fields

According to the theory, a large magnetic field generator, or dynamo, is created when liquid metal flows through the planet's outer core, producing electric currents that generate a magnetic field. Magnetization patterns in rocks on the surface of planets can serve as evidence for the presence of this internal structure at some point in the celestial object's past.

Maintenance, curtailment, congestion, and wind speed can park a wind turbine

Wind turbines are optimized to operate at wind speeds between about 10 and 80 kph, but an internal brake stops them if energy is not required. Routine preventative maintenance and cleaning also prevent blades from rotating.

How are scientists turning deserts into farmland?

This article explores how engineers are using a liquid nanoclay solution to transform barren deserts into productive fruit farms, drawing inspiration from how clay particles carried by floodwaters in the Nile Delta used to improve the fertility of...

From 1990 to 2020, wind turbine height and blade length have more than tripled

Wind turbines' energy generation capacity—or maximum power rating—also increased by 375% from 1998 to 2023. As of that year, wind turbines can produce more energy per dollar than solar panels, though transportation and installation challenges remain.

Internal-combustion engines convert fuel into motion using controlled explosions

Gasoline engines mix fuel and air, compressing it and igniting it to create thousands of tiny explosions that push pistons up and down. This movement spins the crankshaft, which moves a vehicle's wheels.

Some renewable energy sources may weaken the resiliency of electric grids by removing outage buffers provided by coal- and natural gas-fired plants, which provide the system with more time to find a new power source if a plant goes down.

Transpiration drives water movement through a plant’s vascular system

Water evaporates from the leaves, creating tension that pulls more water upward from the roots through the xylem—the equivalent of plant blood vessels. This process is supported by water molecules sticking to each other (cohesion) and xylem walls (adhesion).

Carbon-neutral data centers may be possible if built within wind turbines

Wind turbine towers are typically hollow, housing only cables and a ladder for maintenance access. The excess electricity a wind turbine collects could power a stack of server racks more than 100 meters (328 feet) high within its tower.

For the same cost, turbines with three blades are the most resilient

Odd-numbered blade values more evenly distribute wind loads across the face of rotors, reducing bending and twisting forces on the turbine that cause wear. Modeling shows that three blades optimize efficiency and cost for everyday wind speeds.

An overview of hydropower

Hydropower, or the use of the natural flow of moving water to generate electricity, is one of the oldest and largest sources of renewable energy.

Erie Canal builders invented the “stump puller” to clear forests

One ingenious device created for the Erie Canal was the stump puller—a horse-powered machine using levers and chains to rip tree stumps from the ground.

Fiberglass and epoxy resin on blades complicate the recycling of wind turbines

Between 85 and 95% of a turbine's materials—except for the blades—can be recycled. Blades have been left in landfills when not repurposed into playgrounds and sheds, but new processes may allow them to be made into pellets for injection plastics and concrete.

Solar panels can create pollinator-friendly habitats by protecting flowering plants

An example of agrivoltaics, where land is used for solar energy production and agriculture, the panels provide clean energy while also shading plants from excessive sunlight. Pollinator-friendly plants can improve water quality and reduce soil erosion by obstructing the wind.

Differences in pressure and temperature between atmospheric gases create wind

Because Earth's surface is not uniformly heated by the sun at all times, pockets of warmer and cooler air will form and interact. Warmer pockets of less dense air will rise, leaving gaps for cooler, denser air to move in. Wind is this movement of air from high-pressure to low-pressure areas.

Wind farms are targets for conspiracy theories due to their visibility and complexity

The proliferation of misinformation and conspiracy theories surrounding wind farms is driven by deep-seated anxieties about change, distrust of government, and resistance to confronting the complexities of modern energy solutions.

Interacting sound waves can create regions where the pressure from each wave combines, allowing objects to levitate in place against gravity or be manipulated for touch-free construction.

Agrivoltaic solutions are tested in the land around the Biosphere 2 complex

The experiments involve identifying conditions needed to grow plants beneath solar panels, which protect the plants from the harsh sunlight of the Arizona desert. Research includes a citizen science component, where satellite gardens have been installed in nearby high schools.

Tornado formation relies on wind shear to create a tube of rotating air

Once a horizontal vortex is created by air circulating between winds of different directions and speeds, an updraft, such as those seen in powerful thunderstorms, tilts the vortex vertically. The updraft then strengthens the vortex, which becomes a tornado upon touching the ground.

Selection of wind farm sites considers wildlife impacts and wind resource potential

Environmental impact studies, wind energy maps, anemometer data, and local, state, and federal regulations factor into wind farm projects, including offshore farms. Wind projects on public lands require additional permitting.

A solar-powered device with googly eyes is pulling trash from Baltimore's harbor

Mr. Trash Wheel uses a conveyor belt to scoop debris from the surface of Baltimore's Inner Harbor before it reaches the Chesapeake Bay, and it runs on a combination of water current and solar power.

Unlike solar panels, which convert sunlight directly into electricity, concentrated solar power systems focus sunlight to heat a material that boils water, which then drives a turbine-generator to produce electricity.

Geothermal power can be used beyond heating and energy production

Depending on the depth of the natural vents or artificial wells drilled, the surrounding fluid temperature will vary greatly—from 10 to 371 degrees Celsius (50 to 700 degrees Fahrenheit)—allowing for various applications, including the drying of cement, concrete, and lumber, as well as the processing of pulp and paper.