Maintenance, curtailment, congestion, and wind speed can park a wind turbine

Explore an interactive graphic of a wind turbine's components

Wind turbines contain a gearbox that increases the rotation of the blades by a factor of 100 from low to high-speed shafts. The latter moves magnets that change the magnetic field within a generator, creating electricity.

Wind turbines are limited to capturing no more than 59.3% of incoming wind energy

In 1919, German physicist Albert Betz applied the laws of conservation of mass and momentum to airstreams to calculate the theoretical limit. However, real-world turbines only convert 35 to 45% of available wind energy into electricity.

For the same cost, turbines with three blades are the most resilient

Odd-numbered blade values more evenly distribute wind loads across the face of rotors, reducing bending and twisting forces on the turbine that cause wear. Modeling shows that three blades optimize efficiency and cost for everyday wind speeds.

Technological advancements will make future wind turbines more efficient and quieter

Manufacturing larger, more powerful turbines will result in future wind farms requiring fewer of them to meet energy demands. Larger turbines will meet these demands while rotating at lower speeds, reducing risks to avian wildlife.

Due to their enormous size, wind turbines are assembled on-site using prefabricated components, advanced cranes, and vibration-damping systems to withstand the dynamic ocean environment.

Fiberglass and epoxy resin on blades complicate the recycling of wind turbines

Between 85 and 95% of a turbine's materials—except for the blades—can be recycled. Blades have been left in landfills when not repurposed into playgrounds and sheds, but new processes may allow them to be made into pellets for injection plastics and concrete.

From 1990 to 2020, wind turbine height and blade length have more than tripled

Wind turbines' energy generation capacity—or maximum power rating—also increased by 375% from 1998 to 2023. As of that year, wind turbines can produce more energy per dollar than solar panels, though transportation and installation challenges remain.

Wind energy 101

Learn more about the wind industry, from how a wind turbine works, to the new and exciting research in the field of wind energy.

Wind turbines explained

Wind turbines have powered homes since 1887, and today they’re stronger, quieter, and more reliable than ever. Offshore wind could power millions and grow fast enough to meet climate goals.

Carbon-neutral data centers may be possible if built within wind turbines

Wind turbine towers are typically hollow, housing only cables and a ladder for maintenance access. The excess electricity a wind turbine collects could power a stack of server racks more than 100 meters (328 feet) high within its tower.

Wind energy is categorized into land-based, distributed, and offshore types

Distributed wind turbines efficiently serve on-site energy needs, while land-based turbines are large and generate cost-competitive electricity. Offshore wind turbines capture powerful winds above the ocean and may be pounded into the seafloor using pile drivers or built to float above water at scales larger than the Statue of Liberty.

See technicians use rappelling gear to make wind turbine repairs from 35+ stories up

Although drones are used to conduct initial reviews from the ground, mechanical engineers trained in turbine maintenance face extreme risks during close inspections more than 150 meters off the ground.

Establishing the wind power grid required incentives, reliability, and affordability

Although wind was harnessed to generate electricity for individual buildings in the late 1800s, high costs, mechanical issues with turbines, and better fossil-fuel alternatives delayed wind power's widespread growth. After the oil crises of the 1970s, governments sought alternative energy sources and, in the decades that followed, provided tax credits to expand the wind power market.

The carbon footprint of manufacturing a wind turbine is offset within seven months

Despite initial carbon emissions during manufacturing, wind turbines generate nearly zero pollution across their 20- to 25-year lifetimes. Offsets occur when turbines replace energy generation from coal and natural gas plants, which emit carbon dioxide.

Some renewable energy sources may weaken the resiliency of electric grids by removing outage buffers provided by coal- and natural gas-fired plants, which provide the system with more time to find a new power source if a plant goes down.

Window collisions and cats kill more birds than wind turbine farms

Researchers are developing solutions to reduce bird fatalities due to wind turbine farms, including radar systems integrating AI to detect birds and shut down systems. Painting blades with various patterns is also being tested, which may reduce bird strikes by 70%.

High-altitude kites can perform airborne collection of energy from high-speed winds

Winds at high altitude are stronger and more consistent than those near Earth's surface, where natural and artificial barriers disrupt airflow. Kites pulled by the wind can extend a tether like a yo-yo, creating electricity in an attached ground generator.

Understanding the power grid and how renewable sources fit in

The power grid is evolving to include ever-higher levels of solar and wind, which don't provide inertia. Should system planners and operators panic?

Selection of wind farm sites considers wildlife impacts and wind resource potential

Environmental impact studies, wind energy maps, anemometer data, and local, state, and federal regulations factor into wind farm projects, including offshore farms. Wind projects on public lands require additional permitting.

Agricultural land remains mostly unchanged after wind projects

From 2012 to 2020, less than 0.05% of available US farmland had commercial wind turbines installed. More than 95% of this land lacks wind farm structures such as turbine pads or roads, leaving most cropland and pasture-rangeland unchanged.

Wind farms are targets for conspiracy theories due to their visibility and complexity

The proliferation of misinformation and conspiracy theories surrounding wind farms is driven by deep-seated anxieties about change, distrust of government, and resistance to confronting the complexities of modern energy solutions.

Examining the causes of power outages, from system damage to preventative measures

Stray balloons, contact with trees, malfunctioning equipment, and severe weather are among the causes of failures that can cause widespread, unplanned blackouts. Although contingency options that rely on alternative transmission pathways to deliver electricity from generators to consumers may be possible, some shutoffs, brownouts—available power is reduced—and cycles of repeated outages may be intentionally implemented to protect public safety.

Unlike hurricanes, tornadoes are not ranked based on measured wind speed

Technological limitations prevent direct measurements of wind speeds where tornadoes make contact with the ground. Instead, the Enhanced Fujita scale assigns a rating with a range of speeds based on how much damage a tornado caused to various types of structures. These types are more extensive than the original Fujita scale.

View a distribution of wind turbine locations across the US

As of May 2025, the US Wind Turbine Database maps and provides technical specifications for 76,051 onshore and offshore turbines from 1,794 projects, ranging from small installations to large-scale wind farms.

Engineering tall structures requires managing wind, earthquakes, and other destabilizing factors

Reinforced concrete, energy dampers, braced frames, flexible structures, and aerodynamic decks were among the methods implemented when building structures such as the Shanghai Tower, the Texas Super Skyscraper, and the South Rangitīkei Viaduct.

Windmills can be designed to pump groundwater for irrigation or land drainage

A gearbox within the windmill converts the windmill's rotation into the vertical motion of a piston that pushes water up a pipe. It also drives the rotation of an Archimedes screw to move water to higher elevations.

Wind helps trees develop resistance to collapse

Scientists at Biosphere 2 found that trees grew faster in the facility than those in the wild but collapsed more quickly when replanted outdoors. Researchers uncovered that trees build resistance when pushed and pulled due to wind stress, strengthening their foundational root systems.

If the Earth stopped spinning, 85% of the world's population would experience supersonic winds

The planet's equator moves about 470 meters per second—over 1,000 miles per hour—and air there would continue moving at this speed for several minutes if the ground stopped rotating. These conditions would cause tsunamis, global storms, and fling debris fast enough to destroy nearly all human-made structures.

Wind is the movement of air caused by the sun's uneven heating of Earth

The tilt, curvature, and variations in Earth's surface composition across the globe cause different regions to receive different amounts of solar radiation. As the Earth spins and tries to achieve thermal equilibrium, air masses move and interact, creating wind.

Reaching 2,400 kilometers per hour (1,500 miles per hour), Neptune's winds are the strongest in the solar system.

Tornado myths include suggestions to hide beneath a bridge or to open windows

Winds can accelerate due to a tunneling effect as they pass under a structure, making seeking shelter from a tornado in a mobile home or recreational vehicle highly discouraged. Significant tornado damage results from debris being picked up and hurled by strong winds, making it unsafe to be near windows that may shatter.

Mosquitoes stop flying at wind speeds equivalent to the swishing of a horse's tail.

Airplanes generate enough lift to fly by accelerating air faster over their moving wings, which makes the pressure above the wings lower than the pressure below.

Pilots are familiar with multiple types of turbulence, each with varying severity

Each type is defined based on what disrupts airflow in the atmosphere, including thunderstorms, mountains, and wakes produced by aircraft that previously took off. Pilots classify turbulence as light, moderate, severe, or extreme based on how it affects aircraft movement.

Hurricanes are classified according to their maximum sustained wind speed

The Saffir-Simpson Hurricane Wind Scale is a rating system that organizes hurricanes into one of five categories. Categories three and higher are classified as major hurricanes, but all categories can produce deadly storm surges and rain-induced floods.

The turbulence experienced in airplanes results from unexpected changes in airflow

Pilots rely on forecasts, onboard tools, and air traffic control to avoid regions of severe turbulence during flight. Turbulence is generally weaker for those sitting in the front of the main cabin and for morning flights that follow cooler nighttime temperatures.

Hurricane conditions are created in a University of Miami wind-wave tank

The SUrge-STructure-Atmosphere INteraction Wind Wave Laboratory contains a 38,000-gallon wave pool connected to a wind tunnel that can generate air currents of up to 155 mph. SUSTAIN allows scientists to study how the atmosphere interacts with the ocean in extreme weather.

Renewable energy basics

Discover the many benefits to using renewable energy resources, but what is it exactly? From solar to wind, it’s the fastest-growing source of energy in the world – and how we can use it to combat climate change.

A look at how power is restored after an outage on the electric grid

From minor system failures to more widespread blackouts, crews begin by assessing damage done to infrastructure, such as transmission towers and distribution power lines. Prioritizing essential services, such as hospitals, crews then begin restoration, starting with any damage found closest to the power generation and working down the distribution system to customers.

Why decarbonizing the entire electric grid is impossible with its current infrastructure

Fossil fuel plants can be built anywhere and have thus typically been built near highly populated areas, such as coastal cities, where electricity demand is high. However, certain renewable resources operate most efficiently in specific regions, such as wind turbines in the Midwest, and therefore require substantial transmission infrastructure to be constructed to transport the generated electricity.

Turbulence is needed to make airplanes more stable and golf balls fly farther

Vortex generators—small fins placed along airplane wings—create small eddies that prevent airflow separation, maintaining lift and preventing stalls. Golf balls have dimples that create a turbulent boundary layer on their surface, minimizing drag forces.

Wind chill speeds up the loss of heat from the body

During cold weather conditions, strong winds against exposed skin can produce a sensation of temperature colder than the surrounding air temperature. The accelerated loss of body heat increases the risk of frostbite and hypothermia, with frostbite able to set in as quickly as five minutes.

As of 2025, wave power projects remain in early research and testing phases

Waves can become a steady source of renewable energy because they do not pause like wind and solar power do. However, funding gaps and the effects of storms, salt exposure, and biofouling—mussels and other sea creatures attaching to wave machines—have presented challenges in scaling the technology beyond testing sites.

See the lists of the worst hurricanes in the US through 2024

Several metrics, including wind speed, pressure, damage costs, and casualties, may be used to define the most devastating hurricanes. This page provides the top 10 hurricanes across each of these sorting methods.

As much as 10% of home electricity use comes from unused devices left plugged in.

The average electric vehicle motor has about 20 moving parts

The simpler design significantly reduces the energy lost to heat compared to the approximately 2,000 parts in a gas-powered car. Pollution is also lower, though an EV's emission profile is only as clean as the electric utility it's plugged into.

The benefits and risks of smart grids, from improved efficiency to cybersecurity risks

By using a network of devices, including digital meters, sensors, and controllers, smart grids can quickly detect mechanical issues and fluctuations in supply and demand, automatically adjusting electricity flow to prevent cascading failures. While this is important for variable solar and wind power generation, many of these computer systems are designed to be controlled remotely, which increases the risk of malicious access.

Geothermal power plants can provide large-scale energy storage for other systems

These facilities can store excess energy from solar and wind power as hot water or steam, which can be used to run turbines to generate electricity when other renewable energy sources are unavailable. Simulations have found efficiencies of 90% during a storage-use cycle, making it comparable to lithium-ion batteries.

Sand 'batteries' can store excess electricity from the power grid as thermal energy

Energy collected from solar or wind power is used to heat insulated silos full of sand to temperatures as high as 450 degrees Celsius (842 degrees Fahrenheit), which can be retained for long periods. These thermal energy storage systems can be designed to boil water and generate electricity when needed.

The intensity of auroral activity approximately follows the sun's 11-year cycle

The density, speed, and temperature of material ejected by the sun are at their lowest at the start of each cycle, resulting in weaker interactions with Earth's magnetic field and muted, diffuse auroras. While the average solar wind speed is about 300 kilometers (186 miles) per second, the fastest winds can be more than three times faster.