LEDs emit pure colors, while incandescent bulbs filter white light

Light appears to slow down as it travels through different materials

As electromagnetic waves interact with particles in a transparent medium, particles vibrate and generate their own electromagnetic waves. The interference of the original and generated waves, which are slightly delayed, results in ensemble light with an effective slower speed but unchanged color.

Starting with red, colorful objects will appear to lose their colors the deeper they are submerged because water scatters light, reducing the amount available to reflect off objects and be observed.

The traditional colors of Advent are purple, rose, and white

Purple is Advent’s primary color, symbolizing preparation and prayer; rose appears on the third Sunday to signal joy; and white, used for the fifth Advent candle or Christmas liturgies, represents purity and celebration as Christmas arrives.

Thomas Edison created the first strand of electric Christmas lights in 1880

Edison strung electric bulbs outside his laboratory in 1880, and his business partner Edward H. Johnson first wrapped a tree in lights in 1882. It wasn’t until the lights were commercialized in 1917 that they became common in household Christmas decorations.

Red and green became Christmas colors thanks to holly—and Coca-Cola

Holly's green leaves and bright red berries linked the colors to winter festivals for centuries, but Coca-Cola's 1931 Santa—painted by Haddon Sundblom in Coke-red robes—helped cement red and green as the modern Christmas palette.

Atmospheric composition and temperature impact the color of lightning

Just as fire ranges from red to blue with increasing temperature, lightning's blueish-white comes from the superheating of air. The emission of light from the predominantly nitrogen- and oxygen-rich atmosphere produces a purple tint, with additional color caused by light scattering from humidity, hail, dust, and ash.

Blacklights can illuminate certain biological materials, including blood, teeth, and fingernails, because they contain fluorophores—molecules that visibly glow immediately after exposure to higher-energy light.

Before electric lights, Christmas trees were lit with real candles

The practice of lighting Christmas trees with electricity didn’t begin until the late 1800s. Before that, families used wax candles on branches—a dangerous tradition that originated in 16th-century Germany.

By separating light with tools such as prisms, scientists can reveal the presence and composition of celestial matter by identifying color fingerprints unique to specific elements and molecules.

Bright blue fireworks are the most difficult color to create

Copper chloride emits blue light when heated, but breaks down at the temperatures created when fireworks explode. Pyrotechnicians continue to search for an ideal mixture that provides a temperature high enough for copper chloride to shine brightly without being destroyed.

Light has been modeled as a wave and a stream of particles throughout history

Isaac Newton first identified white light as composed of a spectrum of colors, which he believed consisted of particles of different hues. Various light phenomena, including refraction, led Christiaan Huygens to develop an alternative wave model. Quantum mechanics validated both models through the concept of wave-particle duality.

Proteins with limited light sensitivity prevent humans from seeing all types of light

Specialized photoreceptor cells in the retina called cones each possess photopigments that activate when exposed to three ranges of visible light. Other forms of electromagnetic radiation outside the activation range do not generate signals for processing in the brain, thereby limiting average human vision to approximately 10 million colors.

The different energy levels of each element result in unique colors when burned

When heated, electrons absorb energy and move to excited states within an atom. They promptly drop back down and release light energy corresponding to the size of the drop, which is unique to each element.

Breaking down sunlight and why the sun appears yellow despite emitting green light the most

This peak intensity is produced alongside a spectrum of other colors, which, when combined, make the sun appear white in space. Since Earth's atmosphere scatters bluer and greener wavelengths of light more than red and orange wavelengths, sunlight reaching Earth's surface appears yellow, while the sky appears blue. (Some readers may experience a paywall.)

Reindeers are the only known mammals whose eyes change color with the seasons, going from golden yellow in the summer to deep blue in the winter.

When processing light, the brain can perceive colors with no natural wavelength

While some animals are sensitive to many forms of light, humans possess receptors that are sensitive to red, green, and blue wavelengths. These receptors send signals to the brain, which are processed and mixed to produce the array of colors we observe, including magenta, pink, and "supercolors" that lack a corresponding natural wavelength in the visible spectrum.

Colorizers convert Hubble's gray scale images into color composites of different wavelengths

The near-infrared and ultraviolet light captured by the space telescope is not visible to human eyes, but observational data of these types of light can be filtered and modified into visible colors. Many detailed images of astronomical objects are the result of combining these artificially colored images into layers.

A collective effort from multiple scientists and inventors led to the light bulb

While Thomas Edison's thin carbon filament design made light bulbs commercially viable, prior contributions, such as Joseph Swan's development of the first successful incandescent filament electric lamp, made its eventual invention possible.

Bioluminescence may provide a sustainable alternative to electric lighting

French start-up Glowee is experimenting with lights made from bioluminescent microorganisms in public spaces to reduce energy use. While the technology shows promise, challenges remain with brightness, maintenance, and scaling it for widespread use.

Fluorescent bulbs can be illuminated by overhead power lines without making contact

The electromagnetic fields produced by the alternating current in transmission lines can induce the motion of charges in nearby objects. This motion yields electric currents that can light up bulbs but are too small to harm humans.

View a gallery of plants made to shine using ultraviolet-induced visible fluorescence photography, in which organisms re-emit the ultraviolet light they are exposed to in vibrant, glowing colors.

Color originates from the brain processing light of varying wavelengths

Various geometric models, including Newton's color circle of hue and saturation and the horseshoe-shaped XYZ space for mixing colors via vector mathematics, have been proposed to describe colors accurately. However, these models do not encapsulate the variety of psychological effects that cause perceived colors to differ from mathematical representations.

Bright light therapy involves basking in 10,000 lux of light for 30 minutes each morning

Nothing is better than going outside and soaking up real sunlight. However, this is harder in winter, especially in very cold and cloudy regions. SAD lamps are designed to project 10,000 lux—a unit of illuminance, or how much light actually hits a surface (rather than how much is produced, like watts). This video discusses product options and practical considerations.

Light waves can interfere and cancel each other out

When light waves travel past one another, their peaks and valleys combine, just as overlapping ripples in water can combine to form a larger ripple. When the peak of a light wave meets the valley of another of the same wavelength and brightness, the waves combine to produce no light.

Scientists create contact lenses that give you infrared vision

Scientists have created lenses that use nanoparticles to convert infrared light into visible light, allowing human eyes to observe previously invisible parts of the electromagnetic spectrum. This technology may help colorblind individuals by converting colors they cannot see into wavelengths they can.

Some materials can absorb low-energy light and emit high-energy radiation

Through anti-Stokes cooling, incoming energy is combined with vibrations in a material's crystal lattice to produce a net reduction in its temperature. Using this effect, lasers can be directed at microchip hot spots to help keep data centers cool.

Stimulating electrons to emit identical photons produces lasers

This effect was predicted by Albert Einstein in 1917, and requires all excited electrons in a material to exist in the same excited metastable state within their atoms. Pumping all atoms through the same mechanism, such as electricity or flash lamps, can create this environment.

During the fall, shorter days trigger cells in leaves to produce less chlorophyll, a green pigment that is typically present in sufficient concentrations to mask other pigments, such as yellow and orange.

Photonic integrated circuits use light instead of electrons within circuit components

Instead of processing electric signals, photons in the visible and near-infrared serve as optical signals between chips made of electro-optical crystals. PICs can enable lower power consumption and heat generation by eliminating the friction from electrons moving along wires.

See how artificial Christmas trees are made

Modern artificial Christmas trees are built from bent steel frames and PVC plastic. The plastic is cut into strips and shredded to mimic the needles of an evergreen tree. See the factory process of these mass-produced holiday mainstays.

Red and blue election maps are a modern media invention

The red–blue color scheme used on election night maps emerged in the 20th century as television networks adopted color graphics to make results easier to follow. The association of red with Republicans and blue with Democrats later became standardized.

The design of a psychiatric ward in Norway aims to integrate more circadian rhythm-friendly lights as part of its treatment protocols for conditions including psychosis, severe depression, and more.

Virtually all plants are biofluorescent because their photosynthesis is powered by chlorophyll, a pigment that glows red as a way to get rid of excess energy when exposed to ultraviolet light.

Fireworks make a loud booming sound after explosion due to air expanding faster than the speed of sound.

View an animation of how certain chemicals fluoresce—that is, emit visible light after having absorbed higher-energy light, such as ultraviolet radiation.

Rayleigh scattering of light gives the atmosphere its blue skies and red sunsets

Light is deflected from its original path by atmospheric particles, where bluer light is scattered more than other colors. When the sun is at its highest point in the sky, it travels through the thinnest part of the atmosphere, scattering some blue light across the sky. A greater atmospheric path length at sunset scatters more colors, leaving only red, yellow, and orange.

Infrared light is most often associated with thermal radiation and cooking food

Although extensively used in remote controls for electronics, where LED lights send signals wirelessly, infrared cameras allow for night vision and thermography—imaging of heat patterns in the body to non-invasively reveal blood flow for supplementary diagnostics. Infrared radiation also provides heat in toasters, saunas, and other technologies.

Solar activity and the density and chemical composition of the air affect auroral colors

Oxygen atoms can emit red and green light when energized by collisions with the solar wind, but red takes longer to be emitted and is disrupted by bumping into other molecules. This causes red light to appear at higher altitudes, where the air is less dense. Higher-energy solar wind can penetrate to lower altitudes and collide with more abundant ionized nitrogen, which produces blue light.

Variations in the energy of light force the use of multiple telescopes

Just as Earth's atmosphere allows the sun's visible light to pass through while blocking other harmful radiation, telescope mirrors and other optics can only reflect, absorb, or transmit certain types of light. Detectors also utilize semiconducting materials that react to specific energies of light, thereby preventing a one-telescope-fits-all solution.

Bioluminescent organisms produce their own light through chemical reactions involving unstable, energetic molecules, while biofluorescent organisms almost immediately re-emit light shone on them, but at a different wavelength.

Photons emitted via stimulated emission have identical characteristics

When confined to a pair of mirrors, a single photon passing a region of population-inverted atoms can produce a chain reaction of monochromatic light. This chain reaction amplifies the initial photon, from which lasers get their name: light amplification by stimulated emission of radiation.

Everything with a temperature above absolute zero emits light at nearly all wavelengths

Thermal radiation results from random motions of particles that make up an object, which only theoretically cease at 0 Kelvin, or -273.15 degrees Celsius. The greatest intensity of thermal radiation, also known as blackbody radiation, is emitted at a characteristic wavelength corresponding to the object's surface temperature.

Chromium contaminants in a ruby crystal gave the world's first laser its red color

The red light originates from a long-lasting excited electron state in the element's atomic structure. The brittle gray metal has historically been used in pigment production, the manufacturing of rust-resistant stainless steel, and the creation of durable coatings with long-lasting shine for metals, wood, and leather.

View a gallery of biofluorescent animals, which contain cells that emit various colors when exposed to ultraviolet light.

A brief history of Christmas tree design

A celebration of the Christmas tree in all its festive glory. Get a glimpse into its intriguing background and the lore that accompanies it.

In the early 2000s, the average color of the universe was determined by averaging the visible light from 200,000 galaxies, yielding a light beige dubbed 'cosmic latte.'

How the pigments that absorb light for photosynthesis contribute to plants' green color

Although light energy is captured to power the reactions that produce the building blocks of starch, cellulose, glucose, and other sugars, chlorophyll a and b are most sensitive to violet, blue, orange, and red light, leaving green light mostly unabsorbed. This green light is instead reflected, giving most plants this color appearance.

Light echoes are expanding shells of reflected starlight

Just as sound waves reveal the location of obstacles by reflecting off them, pulses of light emitted by stars illuminate rings of interstellar dust, giving the appearance of ejected material as the light travels outward.

Fiber lasers used for metal engravings can’t burn your skin

These devices use diodes and mirrors to create pulses of light that vaporize metal in billionths of a second, though at wavelengths that cannot react with organic material. Pulse width, power, and speed adjustments can produce white, black, and even colored patterns through controlled heat reactions.

High-powered red light therapy—delivered directly to nerve fibers via a fiber optic needle—has been used in recent experimental research to suppress pain.