Turbulence is needed to make airplanes more stable and golf balls fly farther

The turbulence experienced in airplanes results from unexpected changes in airflow

Pilots rely on forecasts, onboard tools, and air traffic control to avoid regions of severe turbulence during flight. Turbulence is generally weaker for those sitting in the front of the main cabin and for morning flights that follow cooler nighttime temperatures.

Airplanes generate enough lift to fly by accelerating air faster over their moving wings, which makes the pressure above the wings lower than the pressure below.

Turbulence is crucial to the formation of stars in molecular clouds

Within simulations of these clouds, gravity, jets, supernovae, and galactic motion-induced stirring have been shown to develop turbulence that creates shocks. These turbulent shocks move quickly in low-density regions and slow in high-density areas, forming lumps of matter with sufficient gravitational force to collapse and initiate fusion, birthing a star.

When experiencing turbulence, fluid elements undergo stretching and folding

Simulations show patches of fluid particles, such as splashes of milk, bend under turbulent flow, creating curvature that grows linearly then exponentially. This accelerated deformation enhances folding and mixing faster than other methods, such as stirring or beating.

Mathematics proves turbulence's chaos creates super diffusion

Turbulent flow is responsible for the rapid scattering of dandelion seeds, volcanic ash, and untied balloons. Its swirling behavior accelerates particle scattering faster than other mixing methods, as particles acquire energy from the interactions of eddies.

Pilots are familiar with multiple types of turbulence, each with varying severity

Each type is defined based on what disrupts airflow in the atmosphere, including thunderstorms, mountains, and wakes produced by aircraft that previously took off. Pilots classify turbulence as light, moderate, severe, or extreme based on how it affects aircraft movement.

Tornado formation relies on wind shear to create a tube of rotating air

Once a horizontal vortex is created by air circulating between winds of different directions and speeds, an updraft, such as those seen in powerful thunderstorms, tilts the vortex vertically. The updraft then strengthens the vortex, which becomes a tornado upon touching the ground.

Turbulence has been called the most important unsolved problem in classical physics

Despite being the most common type of fluid flow in our world, scientists have struggled to model turbulent flow accurately. Though behaving unpredictably, understanding inertia and viscosity can help determine whether turbulence will occur.

Understanding turbulence, which is characterized by growing chaos at multiple scales

As energy is lost in fluids undergoing turbulent, non-linear flow, particles will collectively form eddies, or whirlpools, of various sizes that mix together. The energy cascade of larger eddies becoming smaller ones before dissipating completely varies based on the initial conditions of the fluid, a characteristic feature of chaotic systems.

Horsehead-shaped features seen on the sun and the clouds of Earth and Jupiter are examples of Kelvin-Helmholtz instabilities, where a faster-moving fluid rolls atop a slower-moving fluid.

Why professional tennis players are so picky about balls before serving

Just as swimmers shave their bodies before competitions to swim faster, experiments show that tighter, less fluffy balls experience less drag forces when moving through the air and thus produce faster serves at the cost of less control. Players may select a fuzzier ball in scenarios that call for safer, more cautious play.

Laminar flow moves in smooth, parallel layers, while turbulent flow is chaotic

In laminar flow, particles that make up a fluid move in consistent paths that do not cross each other. Contrastingly, differences across the speed of these particles cause them to mix, creating turbulence when viscosity cannot suppress the differences.

During World War II, fighter plane turbulence was used to make ice cream.

View the transition from laminar to turbulent flow

Using a dye released in the water, streamlines, which are parallel to one another and consistent at low flow velocities, become visible. As the water moves more quickly, viscosity cannot suppress the velocity change, and streamlines become chaotic, creating turbulence.

Atmospheric processes amplify the strength of storms by coalescing clouds

Research has shown that turbulent mixing of air at the edges of clouds and other small-scale thermal activity beneath them help clouds group together, intensifying short bursts of rainfall, especially in tropical regions. Simulations reveal this produces more powerful storms than predicted by older models, though they may occur less frequently.

How jet streams, which reside in the troposphere, shape and confine pockets of atmospheric air

These fast-flowing ribbons of air are hundreds of kilometers wide and typically travel from west to east due to Earth's rotation, with the polar front and subtropical jets serving as major drivers of global circulation. Warmer air near the equator pushes the polar front jets toward the poles, which can buckle and deform them as they contain frigid polar vortex systems.

The Wright Flyer was an engineering breakthrough, and modern aircraft still use the same principles of flight.

Their 1901 Wind Tunnel system revolutionized the study of aeronautics

Only the second to be built in the US, the wind tunnel allowed the brothers to study how air moves around more than 200 different wing shapes. This data helped them refine a key math equation, long held as the standard, that had been based only on one wing shape.

Hurricane conditions are created in a University of Miami wind-wave tank

The SUrge-STructure-Atmosphere INteraction Wind Wave Laboratory contains a 38,000-gallon wave pool connected to a wind tunnel that can generate air currents of up to 155 mph. SUSTAIN allows scientists to study how the atmosphere interacts with the ocean in extreme weather.

In a tornado outbreak, a single severe weather system can spawn multiple twisters

By maintaining the ingredients for tornadoes—differences in wind speed and direction across altitudes, moisture, and rising air—for long periods of time as it moves across a region, a severe thunderstorm can continuously produce tornadoes by lifting multiple columns of horizontally rotating air.

Climate change is increasing the frequency and intensity of severe turbulence

Severe turbulence over the North Atlantic has increased by 55% over the past 40 years, driven by strengthened jet streams and storm systems. Ongoing increases in global temperatures, which fuel these changes, may triple severe turbulence incidents in the coming decades.

An explanation distinguishing the butterfly effect from causality, necessity, and sufficiency

In pop culture, the analogy has conveyed the impression that the flapping of a butterfly's wings has a cascading effect that directly produces a tornado somewhere else on Earth. However, butterfly-wing flapping alone is insufficient to cause tornadoes, as the complexity of atmospheric systems requires many more conditions to produce them, any of which can be the tipping point to initiate tornadogenesis.

Scientists use ground-based radar data to detect turbulence within clouds

NCAR developed the NEXRAD Turbulence Detection Algorithm and the Graphical Turbulence Guidance system to provide forecasts up to 18 hours ahead using ground-based Doppler radar data. Software systems also utilize an automated observation and reporting package—the EDR system—found on Delta, United, and Southwest Airlines aircraft.

Differences in pressure and temperature between atmospheric gases create wind

Because Earth's surface is not uniformly heated by the sun at all times, pockets of warmer and cooler air will form and interact. Warmer pockets of less dense air will rise, leaving gaps for cooler, denser air to move in. Wind is this movement of air from high-pressure to low-pressure areas.

Though less common, tornadoes can form without the presence of thunderstorms

Supercell tornadoes involve rising warm air—updrafts—from the strongest type of thunderstorm—supercells—to help turn horizontally rotating tunnels of air into vertical columns. In non-supercell tornadoes, which are generally weaker as a result of forming within less energetic systems, vertical rotation is present from the start near ground level.

For the same cost, turbines with three blades are the most resilient

Odd-numbered blade values more evenly distribute wind loads across the face of rotors, reducing bending and twisting forces on the turbine that cause wear. Modeling shows that three blades optimize efficiency and cost for everyday wind speeds.

Airports at high elevations, like Denver International Airport, have longer runways than most airports because airplanes cannot take off or land as quickly in thinner air.

Fast-changing conditions during their formation make tornado forecasting difficult

The final steps of tornadogenesis—the process of forming a tornado—depend on near-surface details, such as local geography, which are difficult for radar to observe and affect how funnel clouds make contact with the ground. Inconsistencies in storm behavior have limited the amount of advance warning people receive before tornadoes touch down.

Power lines are dotted with large, brightly colored balls to improve the visibility of these thin wires to helicopters and small planes and help prevent potential crashes.

Tornadoes, or twisters, have been seen on every continent but Antarctica

Because tornadoes require rising warm air to form, some meteorologists have suggested that urban environments—locations where human landscape modification has introduced materials that trap thermal energy—can enhance the conditions needed for tornado formation. Tornadoes have been reported to cause ear "popping" due to drastic changes in air pressure.

Wind is the movement of air caused by the sun's uneven heating of Earth

The tilt, curvature, and variations in Earth's surface composition across the globe cause different regions to receive different amounts of solar radiation. As the Earth spins and tries to achieve thermal equilibrium, air masses move and interact, creating wind.

Various types of tornadoes are distinguished by their shape, size, and location

Waterspouts form over water as long, thin columns of mist and air, while elephant trunks are tornadoes that elongate vertically as they become tilted during their formation, resembling the mammal's appendage. Wedge tornadoes are among the most powerful, often spanning a mile or more in width.

Technological advancements will make future wind turbines more efficient and quieter

Manufacturing larger, more powerful turbines will result in future wind farms requiring fewer of them to meet energy demands. Larger turbines will meet these demands while rotating at lower speeds, reducing risks to avian wildlife.

Swimming in schools helps some fish conserve energy in turbulent flows

Scientists studying groups of giant danios swimming in turbulent waters found that the fish used up to 79% less energy than they did when swimming individually in the same conditions. The same fish were found to use the same amount of energy in turbulent and calm water when in schools.

Using wind tunnels, the brothers corrected a centuries-old error used to measure lift

When their early gliders failed, the Wright brothers scrutinized inherited data analysis. Smeaton’s coefficient had been used to calculate the density of air (0.005) for centuries. The Wright’s data validation through the use of small, laboratory wind tunnels showed the correct number was 0.0033.

Windmills can be designed to pump groundwater for irrigation or land drainage

A gearbox within the windmill converts the windmill's rotation into the vertical motion of a piston that pushes water up a pipe. It also drives the rotation of an Archimedes screw to move water to higher elevations.

Tennis balls get their bounce from pressurized nitrogen inside vulcanized rubber, made from heating natural rubber with sulfur to create molecular links that harden the material.

Most commercial planes get struck by lightning multiple times a year

This piece explains why commercial aircraft rarely crash in thunderstorms, detailing how pilots use onboard radar, shared reports, and strict avoidance protocols to navigate storms that look far more dangerous on screen than in reality.

All hurricanes have a central eye, where no extreme weather occurs, surrounded by intense winds and thunderstorms.

Hurricanes spin due to differences in air and ground speed as they move across Earth

The movement of an object across latitudes causes it to take a curved trajectory because its speed no longer matches that of the ground beneath it. This phenomenon, called the Coriolis effect, explains why hurricanes spin counterclockwise in the Northern Hemisphere and clockwise in the Southern Hemisphere.

Spiral galaxies get their arms, in part, from cosmic traffic jams, in which faster orbiting matter slows down and bunches up before proceeding at higher speed once more.

The Navier-Stokes equations are fundamentally accurate but unsolved in 3D

The equations model fluids and have been shown to have solutions for all systems in two dimensions. Averaging and approximations let the equations be used in climate models, aerodynamics, and medicine, though their use in some systems produces nonsensical answers.

NASA uses a specialized plasma wind tunnel to test heat shield technology

The ArcJet Complex ionizes compressed air that fires onto shields at hypersonic speeds, replicating the conditions of high-speed, planetary reentry. An enhanced facility incorporates lasers to mimic the radiant heating experienced during high-energy atmospheric traversal.

'Breather holes' in airplane windows help manage cabin pressure

Airplane windows have three layers of acrylic: the super durable outside layer, the inner pane which acts like a "scratch" surface, and the middle pane with the tiny hole. This bleed hole allows pressurized cabin air to be borne by the strong outer pane while preventing the inner pane from breaking.

High-altitude kites can perform airborne collection of energy from high-speed winds

Winds at high altitude are stronger and more consistent than those near Earth's surface, where natural and artificial barriers disrupt airflow. Kites pulled by the wind can extend a tether like a yo-yo, creating electricity in an attached ground generator.

Mosquitoes stop flying at wind speeds equivalent to the swishing of a horse's tail.

Trade winds blow from east to west due to the Coriolis Effect

Warm air rises near the equator while cooler air sinks near the poles, creating circulation patterns that curve due to Earth's rotation. At the equator, doldrums—calm regions of no wind—build warm, moist air, creating storms.

Watch how scientists learn about hurricanes by flying into them

A specialized fleet of Air Force planes is built to fly into hurricanes and gather critical data from inside the storm. Beyond radar and microwave sensors, the planes are equipped with dropsondes—small instruments dropped into storms to measure pressure, temperature, and wind.

Planeterrellas create artificial auroras that mimic the atmospheric displays of light by setting up an electric field between two metal balls in a jar filled with a small amount of air.

How golf equipment is made

With just clubs, a ball, and a tee, the game of golf doesn't have the amount of equipment seen in other sports. But each piece of equipment has a very intricate process for its creation. Watch this Science Channel video to see the specialized equipment used to create golf balls, golf clubs, golf carts, and golf tees.