Visualize how alternating currents—electricity that periodically changes direction—are generated by rotating magnetic fields, as occurs in turbine-generator systems.

Transformers change the current and voltage across a set of wires by wrapping them around a magnetic core and using the magnetic field of one wire to induce a current in the other.

While charges consistently move in the same direction in a direct current, the flow of charges changes multiple times per second in an alternating current.

Watch a timeline of the history of electricity, from observations of static electricity in antiquity to the War of the Currents—a rivalry to establish the ideal system for electric grids.

Tesla's alternating current power's most of the world's electric grids

In 1879, Thomas Edison’s light bulb relied on direct current, but such currents can't efficiently transmit power over long distances. Nikola Tesla introduced alternating current, which feature far fewer energy loses. Despite Edison’s attempts to discredit AC, Tesla proved its efficiency by lighting the 1893 Chicago World’s Fair.

Alternating current was used to commit the first execution by electric chair

Dubbed the "executioner's current," the device was designed in Thomas Edison's lab by Harold Brown—an opponent of George Westinghouse and Nikola Tesla. The effort aimed at discrediting AC technology and gain favor for Thomas Edison's direct current as part of "The Current War."

Explore an interactive graphic of a wind turbine's components

Wind turbines contain a gearbox that increases the rotation of the blades by a factor of 100 from low to high-speed shafts. The latter moves magnets that change the magnetic field within a generator, creating electricity.

Electromagnetic induction creates electricity from a changing magnetic field

The phenomenon was discovered in 1831 by Michael Faraday when an electric current was induced in a wire wrapped around an iron ring after a second wrapped wire not connected to the first was connected or disconnected from a battery.

Niagara Falls helped decide the battle between AC and DC power

In the 1890s, Niagara Falls became the proving ground for alternating current (AC) when Tesla and Westinghouse built the first large-scale AC hydroelectric plant—defeating Edison’s push for direct current (DC) in the US electrical system.

Some geothermal power plants make electricity using a secondary fluid

Direct dry-steam systems pull underground steam into a turbine-generator system, while flash and double-flash cycle systems spray extracted liquid water into a low-pressure tank, causing it to rapidly vaporize—"flash"—before moving to the turbine. Binary cycle systems use the extracted steam and water to flash a second fluid that easily boils, which then drives the turbine.

The dynamo theory explains how planets generate their own magnetic fields

According to the theory, a large magnetic field generator, or dynamo, is created when liquid metal flows through the planet's outer core, producing electric currents that generate a magnetic field. Magnetization patterns in rocks on the surface of planets can serve as evidence for the presence of this internal structure at some point in the celestial object's past.

In osmotic power systems, the natural movement of water from regions of low to high salt concentration is used to generate electricity from pressurized water.

Fluxgate magnetometers detect magnetic fields using electromagnets

Instead of a compass needle's movement indicating a magnetic field, an alternating current produces an oscillating magnetic field in a metal bar. An external magnetic field creates an imbalance in the oscillations, which can be measured quantitatively.

The world's first AC hydroelectric power plant incorporated Tesla's engineering

Built at Niagara Falls, New York, the plant alternating current electricity was hailed as the future of power generation. Tesla's fascination with Niagara Falls is traced to his seeing a photo of the waterfalls when he was still a child.

The engineering underlying the electric grid and why it needs to be modernized

The system includes generators for producing electricity and millions of miles of transmission and distribution lines to transport the energy. The substantial increase in the number of electronic devices and electrical demand since the construction of much of the grid in the mid-1900s has strained infrastructure, requiring continuous upgrades and massive investments in new construction.

Some renewable energy sources may weaken the resiliency of electric grids by removing outage buffers provided by coal- and natural gas-fired plants, which provide the system with more time to find a new power source if a plant goes down.

How its uneven rotation produces the sun's 11-year cycle and flips its magnetic poles

While charged material rises and falls in the sun's convection zone, which induces magnetic fields, different latitudes rotate at different rates, making these fields increasingly turbulent. This builds to a critical point—the solar maximum—where magnetic field-driven events, such as solar flares, become more common before the field collapses and flips, restarting the cycle.

Tesla's first successful AC prototype used a metal shoe polish tin for a rotor

After leaving his position working with Thomas Edison, Tesla partnered with George Westinghouse to promote alternating current systems as a more viable, scalable solution to electricity transmission.

The movement of molten metal around Earth's inner core creates the planet's magnetic field, whose north and south poles do not align with the planet's geographic poles.

Named after Nikola Tesla, who pioneered alternating current power systems, the Tesla coil was the first device to wirelessly transmit electricity.

Wind turbines explained

Wind turbines have powered homes since 1887, and today they’re stronger, quieter, and more reliable than ever. Offshore wind could power millions and grow fast enough to meet climate goals.

If two strands of conducting materials are connected at two junctions, electricity can be generated if one junction is heated while the other is cooled—a phenomenon known as the Seebeck effect.

Electricity is produced when the ends of a battery are connected by a conducting wire, triggering chemical reactions that release the energy stored in chemical bonds.

Wind energy 101

Learn more about the wind industry, from how a wind turbine works, to the new and exciting research in the field of wind energy.

Simulate the effects of changing supply and demand on the electric grid

In this application, users can modify the demand of fictional cities and the supply of various generators, including a nuclear power plant and a wind farm, which can be disconnected from the grid. Notice that current may flow into or out of external systems to compensate for available generation. See what it takes to cause a blackout in different cities or shut down the entire grid.

Windmills can be designed to pump groundwater for irrigation or land drainage

A gearbox within the windmill converts the windmill's rotation into the vertical motion of a piston that pushes water up a pipe. It also drives the rotation of an Archimedes screw to move water to higher elevations.

View breakdowns of the world's and each nation's electricity comes from

These charts show how the shares of generated electricity sources—solar, wind, hydro, nuclear, bioenergy, oil, gas, and coal—have changed since 1985. Since 2010, an increase in renewable sources has offset the share lost by nuclear and fossil fuels.

Lightning rods provide a conductive pathway to safely steer massive electric currents

The device is positioned higher above the ground to "catch" one of the many branching filaments of electrons from clouds before they make contact with other surface structures, which have been induced to have a positive charge by overhead storm clouds. The current is then sent to a conductive grid buried underground.

Unlike solar panels, which convert sunlight directly into electricity, concentrated solar power systems focus sunlight to heat a material that boils water, which then drives a turbine-generator to produce electricity.

An overview of hydropower

Hydropower, or the use of the natural flow of moving water to generate electricity, is one of the oldest and largest sources of renewable energy.

Electrogenic animals generate their own electricity within an electric organ by changing the pattern of electrical charges in disc-shaped cells called electrocytes.

Thomas Edison publicly executed animals with AC to convince the public of its dangers

J.P. Morgan first backed Thomas Edison's direct current system, seeing electricity's potential to usurp John D. Rockefeller's kerosene empire. Despite the investments and smear campaign against alternating current, alternating current ultimately won public support after lighting the 1893 World's Fair, after which Morgan would fund Tesla's wireless transmission tower.

Airplanes generate enough lift to fly by accelerating air faster over their moving wings, which makes the pressure above the wings lower than the pressure below.

Wireless charging uses a magnetic field to move charged particles in a battery

Based on the concept of electromagnetic induction, when a compatible device is placed on a charging pad with correct alignment, the alternating current flowing through the pad creates a changing magnetic field. This magnetic field induces a current in the device, recharging the battery without a connecting wire.

In the photovoltaic effect, light generates electricity by creating a charge imbalance after knocking electrons out of atoms in the semiconducting materials of solar cells.

In nuclear reactors, water acts as a coolant and moderator, slowing neutrons produced in nuclear reactions so they are more likely to interact with nuclear fuel and generate sustainable energy.

Niagara power helped electrify early New York City

Tesla's AC system at Niagara Falls was so successful that electricity generated there lit up Broadway theaters and powered NYC's subway system in the early 1900s.

George Westinghouse purchased Tesla's AC technology patents for $60,000

The seven patents in alternating current motors and power transmission formed the basis for a system of technologies including generators, transformers, and lighting. Nikola Tesla spent half the funds on a new laboratory to develop new inventions.

View an interactive map of US power plants, which generate electricity from coal, gas, water, biomass, nuclear fuel, oil, sunlight, and wind.

Understanding the power grid and how renewable sources fit in

The power grid is evolving to include ever-higher levels of solar and wind, which don't provide inertia. Should system planners and operators panic?

Geothermal power can generate electricity and provide direct heating for homes

By drilling several kilometers through penetrable rock, wells can access highly pressurized groundwater warmed by thermal energy trapped beneath Earth's surface. This water can be turned into steam to create electricity in generators. Heating systems several meters deep can pump fluid underground before circulating it through buildings.

Fluorescent bulbs can be illuminated by overhead power lines without making contact

The electromagnetic fields produced by the alternating current in transmission lines can induce the motion of charges in nearby objects. This motion yields electric currents that can light up bulbs but are too small to harm humans.

Wind energy is categorized into land-based, distributed, and offshore types

Distributed wind turbines efficiently serve on-site energy needs, while land-based turbines are large and generate cost-competitive electricity. Offshore wind turbines capture powerful winds above the ocean and may be pounded into the seafloor using pile drivers or built to float above water at scales larger than the Statue of Liberty.

View a dashboard of hourly electricity demand and generation across the continental US.

Cathode-ray tube televisions are examples of electron accelerators

CRT TVs work by converting electricity into heat, which causes electrons to be emitted from the rear of the device in three beams responsible for the colors red, green, and blue. Electromagnets direct electrons to phosphor molecules on the screen, which emit light and illuminate the pixels.

A look at how power is restored after an outage on the electric grid

From minor system failures to more widespread blackouts, crews begin by assessing damage done to infrastructure, such as transmission towers and distribution power lines. Prioritizing essential services, such as hospitals, crews then begin restoration, starting with any damage found closest to the power generation and working down the distribution system to customers.

Wind is the movement of air caused by the sun's uneven heating of Earth

The tilt, curvature, and variations in Earth's surface composition across the globe cause different regions to receive different amounts of solar radiation. As the Earth spins and tries to achieve thermal equilibrium, air masses move and interact, creating wind.

Hydrogen fuel cells, which combine hydrogen and oxygen to generate electricity and water, can be run in reverse to produce hydrogen fuel from water.

Geothermal power plants can provide large-scale energy storage for other systems

These facilities can store excess energy from solar and wind power as hot water or steam, which can be used to run turbines to generate electricity when other renewable energy sources are unavailable. Simulations have found efficiencies of 90% during a storage-use cycle, making it comparable to lithium-ion batteries.

More batteries in the power grid would create an on-demand energy reservoir

Most power grids are inefficient because they require enough generation capacity at all times to avoid blackouts. This means at any given time, as much as 50% of generating capacity at power plants can go unused. Batteries would reduce this inefficiency and allow for real-time adjustments.

Nikola Tesla embraced showmanship when promoting ideas ahead of their time

He once electrified himself during a live demonstration to illustrate the safety and power of alternating current, and his presentations often featured arcing coils, glowing lights, and bold claims about a future of wireless power.