If two strands of conducting materials are connected at two junctions, electricity can be generated if one junction is heated while the other is cooled—a phenomenon known as the Seebeck effect.

Electricity is produced when the ends of a battery are connected by a conducting wire, triggering chemical reactions that release the energy stored in chemical bonds.

In 1880, Jacques and Pierre Curie discovered that electricity could be produced by striking certain materials—the piezoelectric effect—a phenomenon that is seen in barbecue lighters.

Temperatures colder than Pluto can allow electricity to flow resistance-free

Since its discovery in 1911, applications of superconductivity have made MRI machines and maglev trains possible due to quantum effects at extreme temperatures. These effects are modeled as electrons cooperating in pairs and flowing more efficiently.

Electromagnetic induction creates electricity from a changing magnetic field

The phenomenon was discovered in 1831 by Michael Faraday when an electric current was induced in a wire wrapped around an iron ring after a second wrapped wire not connected to the first was connected or disconnected from a battery.

Geothermal power can generate electricity and provide direct heating for homes

By drilling several kilometers through penetrable rock, wells can access highly pressurized groundwater warmed by thermal energy trapped beneath Earth's surface. This water can be turned into steam to create electricity in generators. Heating systems several meters deep can pump fluid underground before circulating it through buildings.

Nuclear batteries generate electrical currents using radioactive materials

Rather than using electrochemical reactions to produce the electrons that flow through a circuit, isotopes like nickel-63 undergo beta decay—emitting electrons—which a semiconducting material can absorb to establish a charge imbalance that generates current. Such batteries could provide low-power energy for decades.

Electricity can flow indefinitely along a ring of superconducting material, which provides zero resistance to the movement of charges due to quantum effects.

Some geothermal power plants make electricity using a secondary fluid

Direct dry-steam systems pull underground steam into a turbine-generator system, while flash and double-flash cycle systems spray extracted liquid water into a low-pressure tank, causing it to rapidly vaporize—"flash"—before moving to the turbine. Binary cycle systems use the extracted steam and water to flash a second fluid that easily boils, which then drives the turbine.

In the photovoltaic effect, light generates electricity by creating a charge imbalance after knocking electrons out of atoms in the semiconducting materials of solar cells.

Electrogenic animals generate their own electricity within an electric organ by changing the pattern of electrical charges in disc-shaped cells called electrocytes.

Watch a timeline of the history of electricity, from observations of static electricity in antiquity to the War of the Currents—a rivalry to establish the ideal system for electric grids.

Named after Nikola Tesla, who pioneered alternating current power systems, the Tesla coil was the first device to wirelessly transmit electricity.

Fracking technology can help make geothermal power possible almost everywhere

Generating electricity from Earth's thermal energy has previously required existing underground reservoirs of hot water and permeable rocks through which the fluid naturally escapes. Today, fractures can be artificially created to form fluid pathways, and surface water can be injected underground and brought back to the surface.

On average, the human body produces about 100 watts of electricity—enough to power a light bulb—but some people can produce over 2,000 watts in short bursts, such as when sprinting.

Visualize how alternating currents—electricity that periodically changes direction—are generated by rotating magnetic fields, as occurs in turbine-generator systems.

A dispute about the origin of twitching frog legs led to the invention of the first battery

Experiments by Luigi Galvani on exposed frog leg nerves showed activity when they were hung from iron railings and brass hooks, suggesting the existence of "animal electricity" that discharged when connected to metals. Alessandro Volta's voltaic pile, which stacked metals with an inorganic electrolyte, showed that electricity originates from chemical reactions.

Stimulating electrons to emit identical photons produces lasers

This effect was predicted by Albert Einstein in 1917, and requires all excited electrons in a material to exist in the same excited metastable state within their atoms. Pumping all atoms through the same mechanism, such as electricity or flash lamps, can create this environment.

Sand 'batteries' can store excess electricity from the power grid as thermal energy

Energy collected from solar or wind power is used to heat insulated silos full of sand to temperatures as high as 450 degrees Celsius (842 degrees Fahrenheit), which can be retained for long periods. These thermal energy storage systems can be designed to boil water and generate electricity when needed.

Metals can be welded together in space without needing heat

On Earth, oxygen naturally reacts with metals to form an oxide layer on their surface, which prevents two different pieces from fusing when they come into contact. If the layer is worn away without oxygen to replenish it, metals can instead stick together upon impact—a phenomenon known as cold welding.

Geothermal power plants can provide large-scale energy storage for other systems

These facilities can store excess energy from solar and wind power as hot water or steam, which can be used to run turbines to generate electricity when other renewable energy sources are unavailable. Simulations have found efficiencies of 90% during a storage-use cycle, making it comparable to lithium-ion batteries.

In osmotic power systems, the natural movement of water from regions of low to high salt concentration is used to generate electricity from pressurized water.

Genetically modified viruses can help construct battery electrodes

MIT scientists' modifications caused the viruses to attract conductive materials, such as gold ions, which the viruses self-assembled into nanowires that could be used in batteries. These components allow batteries to be thinner and flexible enough to be constructed into new shapes.

The dynamo theory explains how planets generate their own magnetic fields

According to the theory, a large magnetic field generator, or dynamo, is created when liquid metal flows through the planet's outer core, producing electric currents that generate a magnetic field. Magnetization patterns in rocks on the surface of planets can serve as evidence for the presence of this internal structure at some point in the celestial object's past.

Rain-catching tubes provide new hydropower source for tropical regions

An experiment in Singapore showed that charge separation could be established by rainwater flowing through narrow tubes. The separation, which creates a voltage, could be scaled up in regions of high rainfall to provide a clean energy source.

Nuclear fusion, where the nuclei of two atoms are combined, can produce near-limitless clean energy, but requires extreme conditions to kickstart because of the natural repulsion of atomic nuclei.

Before the invention of transistors, vacuum tubes made radio possible

Discovered by Thomas Edison, vacuum tubes allow electrical currents to travel through empty space. Later modified into a diode—keeping current flowing in only one direction—vacuum tubes allowed electronics to turn alternating current into direct current.

Some materials can absorb low-energy light and emit high-energy radiation

Through anti-Stokes cooling, incoming energy is combined with vibrations in a material's crystal lattice to produce a net reduction in its temperature. Using this effect, lasers can be directed at microchip hot spots to help keep data centers cool.

The history of many kitchen appliances involves unexpected discoveries and applications, including wartime radar turned hamster defroster and replacing an 'ice king' with heat-stealing boxes.

The world's first geothermal power plant was built in 1913 in Devil's Valley

In Tuscany, Italy, Prince Piero Ginori-Conti of Trevignano established the plant nine years after creating a generator that powered five light bulbs using steam vents in the area. Within three years, a second plant was built with two generators, each with 10 times the energy output of the first.

Metallic hydrogen exists in Jupiter and Saturn due to high pressure and temperature

This state of hydrogen has metallic properties, including conductivity, which powers these planets' magnetic fields. First theorized in the 1930s, its existence was confirmed through indirect evidence before being created in a Harvard lab in 2017.

Unlike solar panels, which convert sunlight directly into electricity, concentrated solar power systems focus sunlight to heat a material that boils water, which then drives a turbine-generator to produce electricity.

Simulate the buildup and discharge of static electricity through friction by dragging the arm and leg of 'John Travoltage' along surfaces.

Transformers change the current and voltage across a set of wires by wrapping them around a magnetic core and using the magnetic field of one wire to induce a current in the other.

How to make your own DIY ionic thruster

In the search for more efficient, sustainable types of propulsive thrust, scientists have dabbled in developing engines using ionic thrust, a type of propulsion using the attractive force of oppositely charged ions. First introduced by a Russian...

Geothermal power can be used beyond heating and energy production

Depending on the depth of the natural vents or artificial wells drilled, the surrounding fluid temperature will vary greatly—from 10 to 371 degrees Celsius (50 to 700 degrees Fahrenheit)—allowing for various applications, including the drying of cement, concrete, and lumber, as well as the processing of pulp and paper.

Benjamin Franklin described a series of static electricity storage jars as 'batteries'

Discovered over 50 years before the first electrochemical cell was invented, Leyden jars stored electric charge between the metals inside and outside a liquid-filled container. Franklin was the first to use the term "battery" in an electrical sense, though his multiple-jar device—lacking chemical reactions—was actually a series of capacitors.

In nuclear reactors, water acts as a coolant and moderator, slowing neutrons produced in nuclear reactions so they are more likely to interact with nuclear fuel and generate sustainable energy.

Heat slowly moves through Earth's mantle like softened wax

Energy trapped during Earth's formation and released via the radioactivity of elements is carried by convection currents towards the surface, while cooler, denser material sinks. The planet's core is almost as hot as the sun's surface.

Wastewater from geothermal power plants helps melt sidewalk snow in Iceland

Located on the Mid-Atlantic ridge, where the North American and Eurasian tectonic plates move apart, the nation saw geothermal power meet more than 90% of its heating demand in 2024. After the hot water produced by these plants is used to heat homes and businesses, it is transferred through small pipes beneath Reykjavík's sidewalks.

A look at hydrothermal vents, where barophiles and hyperthermophiles survive boiling water

Discovered in 1977 during an exploration of the Galapagos Rift, these seafloor openings spew hot magma and chemicals that heat seawater to hundreds of degrees. Without the sunlight found at depths of less than 1,000 meters (3,281 feet), extremophiles in these environments convert released chemicals into energy to survive, alongside surviving extreme pressures.

Heat pumps use an easily boilable chemical to regulate temperature

In air conditioners, warm air is pulled from a home to turn a refrigerant into a gas, which is then compressed, raising its temperature. The gas naturally releases this energy to the comparatively cooler environment when exposed, then expands and is reused in the system. Heaters run in reverse, with the refrigerant picking up energy from the comparatively warmer environment.

Alternating current was used to commit the first execution by electric chair

Dubbed the "executioner's current," the device was designed in Thomas Edison's lab by Harold Brown—an opponent of George Westinghouse and Nikola Tesla. The effort aimed at discrediting AC technology and gain favor for Thomas Edison's direct current as part of "The Current War."

Since 2026, the Large Hadron Collider has provided heat to thousands of French homes and businesses through a system that harnesses hot water from the accelerator's cooling circuits.

There is a limit to how small transistors can become because they rely on being able to allow or block the flow of electrons, but quantum effects allow electrons to leak through these barriers, generating heat, current loss, and potential data errors.

Contactless credit cards descend from a batteryless Cold War listening device

The same physics that let Soviet spies eavesdrop on the US ambassador in 1945 underlie contactless payment methods today. The device is a passive chip powered wirelessly by incoming radio waves.

Aquifer thermal energy storage systems bank water heated during the summer in aquifers—layers of porous rock, gravel, and sand filled with groundwater—which are then collected in winter to warm homes.

Geothermal power can reduce the dangerous mining of rare earth elements

Geothermal brines—mineral-rich underground fluids extracted for use in geothermal plants—contain small concentrations of REEs that can be recovered after energy generation. Although researchers suggest that this retrieval requires complex extraction methods at a significant scale to account for high flow rates, the chemical processes also occur in traditional REE processing.

Under certain conditions, very hot liquids can freeze more quickly than cooler ones—a phenomenon called the Mbemba effect, after the Tanzanian high school student who accidentally observed it.

The continuous decay of radioactive elements regenerates geothermal energy reserves

Geothermal power is a renewable energy source derived from Earth's interior, where the core reaches temperatures exceeding 5,000 degrees Celsius (9,000 degrees Fahrenheit). These temperatures result from leftover energy from collisions during planetary formation, with radioactive decay in the core releasing additional energy that travels to the surface.

Solid-state batteries substitute the fluid electrolyte layer with a solid

The non-flammable solid greatly reduces the risk of fire and explosion, as well as the release of toxic gases via leaks in the existing sulfide-based systems. These batteries use garnet-type solid electrolytes, which provide high ionic conductivity and chemical stability but require temperatures above 1,000 degrees Celsius (1,800 degrees Fahrenheit) for fabrication.