The world's largest lemon battery was made from nearly 3,000 lemons

Benjamin Franklin described a series of static electricity storage jars as 'batteries'

Discovered over 50 years before the first electrochemical cell was invented, Leyden jars stored electric charge between the metals inside and outside a liquid-filled container. Franklin was the first to use the term "battery" in an electrical sense, though his multiple-jar device—lacking chemical reactions—was actually a series of capacitors.

The 2019 Nobel Prize in Chemistry was awarded for lithium-ion battery development

Stanley Whittingham developed the first functional lithium battery in the early 1970s, while John Goodenough doubled its electrical potential in 1980 by replacing the cathode, thereby enhancing its commercial viability. Five years later, Akira Yoshino developed an anode using carbon material, reducing the risk of flammability.

A dispute about the origin of twitching frog legs led to the invention of the first battery

Experiments by Luigi Galvani on exposed frog leg nerves showed activity when they were hung from iron railings and brass hooks, suggesting the existence of "animal electricity" that discharged when connected to metals. Alessandro Volta's voltaic pile, which stacked metals with an inorganic electrolyte, showed that electricity originates from chemical reactions.

Electricity is produced when the ends of a battery are connected by a conducting wire, triggering chemical reactions that release the energy stored in chemical bonds.

Legacy electronics have prevented significant advancements in alkaline batteries

While lithium-ion batteries have increased in energy density multiple times since their commercialization in 1991 and can be sized to various capacities by connecting numerous electrochemical cells, disposable alkaline batteries have been forced to maintain their 1.5-volt standard and form factors for compatibility with existing devices.

Watch a tour of a battery manufacturing gigafactory

Inside Contemporary Amperex Technology Limited's facility, China's largest EV battery manufacturer uses slurry mixing, "jelly rolling," electrolyte injection, and other techniques and equipment to transform raw metals such as lithium and magnesium into approximately 2.2 million electrochemical cells daily.

Genetically modified viruses can help construct battery electrodes

MIT scientists' modifications caused the viruses to attract conductive materials, such as gold ions, which the viruses self-assembled into nanowires that could be used in batteries. These components allow batteries to be thinner and flexible enough to be constructed into new shapes.

Lithium can store and deliver substantial energy for its cost and weight

When exploring which compounds would be best suited for batteries, scientists sought elements that were relatively inexpensive to mine, readily available, and that provided high energy density—how much chemical energy an element could store for its size. Lithium-ion batteries provide these benefits and discharge at very low rates when unused.

Lithium-ion batteries are the standard for rechargeable devices

The costly setup of new mining operations and challenges with recycling amid growing demand have led researchers to search for alternatives, including sodium-ion, solid-state, and lithium-sulphur batteries, despite challenges with scalability.

The Baghdad battery shows no evidence of use as a battery

The 2,000-year-old clay jar held an iron rod inside a copper cylinder and could have generated electricity if filled with an available electrolyte, such as grape juice. Before the jar was looted during the US invasion of Iraq, preventing further study, experts suggested it most likely housed scrolls.

Visualize the minerals used in a lithium-ion battery

The lithium cathode includes nickel to increase energy storage per unit volume, as well as cobalt and manganese as stabilizing agents. Anodes are composed entirely of graphite, with aluminum and copper composing the current collectors for the cathode and anode, respectively. The battery is enclosed in a steel casing.

During manufacturing, lithium-ion and alkaline batteries are tested for short-circuiting

Lithium-ion batteries are made by manufacturing anodes, cathodes, and electrolytes via chemical processes, assembling these components into cells, and enclosing multiple interconnected cells within a protective casing. Disposable alkaline battery production involves filling steel containers with preforms—rings of powdered cathode material—paper-based separators, electrolyte solution, and an anode gel.

How lithium has become one of the world's most important elements

Lithium is the driving force behind electric vehicles as the key element in the lithium-ion batteries that power the cars. But as demand for EVs rises, will global lithium supply keep pace with demand? This report projects demand will reach up to four million metric tons of the mineral compound containing lithium by 2030, with batteries accounting for 95% of end-use applications.

From 1991 to 2024, lithium-ion battery cell prices have fallen by 99%

The decrease from about $10,000 to $50 per kilowatt-hour has been driven by innovations in battery chemistry, improvements in manufacturing and supply chains, and increases in global cumulative production, which have caused average price declines of 19% each time it has doubled.

The benefits of 3D printing batteries, from safety to sustainability

Rather than using the liquid electrolyte commonly found in lithium-ion batteries, 3D-printed batteries would use a solid layer, which can be custom-built into different shapes, deliver higher energy density by building thinner layers, and be fabricated with fewer raw materials compared to injection molding.

The first lithium-ion battery was invented at ExxonMobil

Initially a side project that became a priority due to the 1973 oil crisis, the battery's flammability risks and manufacturing challenges, along with the waning crisis, led the company to shut down its battery program. Other researchers would gradually improve upon published prototype designs in the next decade.

Explore options for recycling batteries

Improper battery disposal can lead to fires and the leaching of harmful chemicals and toxic materials into local soil and water systems. Although many batteries contain metals that can be recycled with less energy than it takes to produce them, variability in regulations across municipalities and states can complicate efforts. (Some readers may experience a paywall.)

View the five most expensive metals used to make batteries

Before 2021, when lithium carbonate became the most expensive metal for use in electric vehicle cathodes, cobalt was the most costly battery metal. Of the top five, copper is the only metal not used in cathodes, arguably the most important part of the battery, which determines performance, longevity, and range.

As of 2025, most EV batteries retain 95% or more of their range after three years

Data from over 30,000 electric vehicles shows that their batteries are lasting much longer than initially projected, which researchers suggest is due to improved battery management systems and real-world use often being less rigorous than high-performance testing. Cars with 150,000 miles or more that have not had a battery replacement retain at least 83% of their original range.

Sony set the standard for cylinder-shaped batteries when it repurposed manufacturing equipment used to make rolls of magnetic recording tape.

The widespread need for rechargeable batteries has fueled surging lithium demand

As of 2025, the average person uses 27 times more mined lithium than they did in the 1990s, with the US ranking second globally in consumption despite producing less than 1% of global supply. However, potential alternative materials and boom-and-bust cycles have challenged the profitability of mines and future demand for the mineral.

Watch how metals are extracted from rechargeable devices during recycling

Recyclable batteries found in cars, phones, power tools, and other electronics contain lithium, cobalt, nickel, and other precious metals, whose reuse generates 70% fewer emissions than during their initial mining. Upon shredding these devices, a filter press squeezes the pieces through a proprietary fluid, which separates them for future reuse.

Growing EV adoption requires battery management infrastructure

Despite rechargeable batteries' limited life cycle, companies like Spiers New Technologies have developed methods to repair, refurbish, repurpose and recycle these components to minimize environmental waste, lower demand for new critical minerals, and increase electric vehicle lifetimes.

In the photovoltaic effect, light generates electricity by creating a charge imbalance after knocking electrons out of atoms in the semiconducting materials of solar cells.

The first practical silicon solar cell was developed at Bell Labs

In 1953, scientists at Bell Labs attempted to develop a power source for phone systems in remote locations, as the dry battery cells lacked the necessary longevity. They experimented with solar power, but the selenium solar cells of the time were too inefficient, eventually leading to the usage of silicon.

Solid-state batteries substitute the fluid electrolyte layer with a solid

The non-flammable solid greatly reduces the risk of fire and explosion, as well as the release of toxic gases via leaks in the existing sulfide-based systems. These batteries use garnet-type solid electrolytes, which provide high ionic conductivity and chemical stability but require temperatures above 1,000 degrees Celsius (1,800 degrees Fahrenheit) for fabrication.

As of 2022, only about 5% of lithium-ion batteries are recycled globally

Traditional recycling methods have been inadequate for lithium batteries, prompting manufacturers to explore more sustainable battery designs, alongside robotic disassembly and ultrasonic techniques to improve recycling rates. Studies have shown that mining for new lithium requires significantly more water and energy than recycling and results in declining vegetation near mines.

Pollution from lead battery recycling has led to widespread contamination

Many small-scale operations worldwide remain unregulated, bypassing environmental regulations and causing increasing health threats, primarily to children. A 2020 report by UNICEF found that one-third of the world's children are being poisoned by lead from recycled batteries, among other sources.

The abundance of raw materials may lead to sodium replacing lithium in batteries

Lower risks of thermal runaway, which can lead to fires and explosions, and less energy capacity loss at low temperatures support the shift. However, sodium's greater weight and lower energy density compared to lithium have made it best suited for stationary storage applications. (Some readers may experience a paywall.)

Dragon seismometers, Baghdad batteries, and more ancient artifacts

The ancients were behind us in many ways, but some inventions from the time have not been surpassed in the modern era in effectiveness, beauty, or cleverness. This quick list of bizarre ancient inventions includes a battery from Baghdad, a Molotov cocktail-like explosive in Greece, and more.

How to safely dispose of every kind of battery

As lithium-ion batteries have proliferated in phones, e-bikes, power tools, and dozens of other devices, improper disposal has become a leading cause of fires in recycling facilities and garbage trucks. Battery Safety Now partnered with the US Forest Service's Woodsy Owl campaign to provide guidance on how to recycle batteries by type, including locator tools for drop-off sites.

Batteries range in size based on their purpose, cost, and manufacturability

Lead-acid batteries used in combustion vehicles are resilient to temperature extremes, low-cost, and provide high surge current, which is needed for initial ignition. Alkaline batteries, including AA, AAA, and B, have long shelf lives and supply the low, steady power required for electronics with minimal demand fluctuations.

Explore the human and environmental resources needed to make an electric vehicle

The minerals needed to build batteries for electric vehicles are expensive and often take a human toll paid by the communities where they are mined. This interactive article details what minerals make up an electric vehicle battery, where they come from, and dangers posed by the mining process.

Electrogenic animals generate their own electricity within an electric organ by changing the pattern of electrical charges in disc-shaped cells called electrocytes.

Accidental ingestion of batteries can be life-threatening

Tissue in the body can serve as a circuit path between the anode and cathode of a battery, resulting in electrical burns and gradual tissue erosion. Stomach acid can corrode a battery and cause its toxic contents to leak, making a person sick. Batteries for internal use, such as in pacemakers, require special designs.

Sand 'batteries' can store excess electricity from the power grid as thermal energy

Energy collected from solar or wind power is used to heat insulated silos full of sand to temperatures as high as 450 degrees Celsius (842 degrees Fahrenheit), which can be retained for long periods. These thermal energy storage systems can be designed to boil water and generate electricity when needed.

Chile, Argentina, and Bolivia hold more than 75% of the world’s supply of lithium

Despite the dependence of phones, laptops, electric cars, and other technologies on the soft, silvery-white metal for their batteries, residents of the Lithium Triangle have not seen the benefits of investments into mining this critical mineral, and have instead faced water shortages and pollution.

Watch a timeline of the history of electricity, from observations of static electricity in antiquity to the War of the Currents—a rivalry to establish the ideal system for electric grids.

On average, the human body produces about 100 watts of electricity—enough to power a light bulb—but some people can produce over 2,000 watts in short bursts, such as when sprinting.

Electric vehicles have been around since the 19th century

The first EVs ran on rechargeable lead-acid batteries, which could travel 60 to 80 miles on a single charge. Women preferred these vehicles, which were quieter, less smelly, and did not require turning a hand crank to start the engine.

In 1880, Jacques and Pierre Curie discovered that electricity could be produced by striking certain materials—the piezoelectric effect—a phenomenon that is seen in barbecue lighters.

Nuclear batteries generate electrical currents using radioactive materials

Rather than using electrochemical reactions to produce the electrons that flow through a circuit, isotopes like nickel-63 undergo beta decay—emitting electrons—which a semiconducting material can absorb to establish a charge imbalance that generates current. Such batteries could provide low-power energy for decades.

The unpredictability and brevity of lightning make lightning power impractical

While a typical lightning strike provides 30,000 amps at 300 million volts, the bolt only lasts about 30 microseconds. If the electrical surge could be captured—assuming one knew beforehand where it would strike—it would only provide enough electricity to power one home for about 6.4 hours.

Rain-catching tubes provide new hydropower source for tropical regions

An experiment in Singapore showed that charge separation could be established by rainwater flowing through narrow tubes. The separation, which creates a voltage, could be scaled up in regions of high rainfall to provide a clean energy source.

More batteries in the power grid would create an on-demand energy reservoir

Most power grids are inefficient because they require enough generation capacity at all times to avoid blackouts. This means at any given time, as much as 50% of generating capacity at power plants can go unused. Batteries would reduce this inefficiency and allow for real-time adjustments.

Solar energy alone can fully power the world if transmission hurdles can be resolved

When light strikes a photovoltaic cell, electrons are loosened, which travel through a circuit where the energy can be used. Distributing energy from high solar intensity regions and storing energy for non-daylight hours is logistically challenging and costly.

If two strands of conducting materials are connected at two junctions, electricity can be generated if one junction is heated while the other is cooled—a phenomenon known as the Seebeck effect.

Gradual chemical build-up reduces the effectiveness of rechargeable batteries

During charge cycles, small chemical deposits gradually form a film on the electrodes where they make contact with the electrolyte, trapping ions that would otherwise facilitate the flow of electricity. Mechanical degradation from electrode wear and electrical shorting from structural instability can also reduce battery capacity.

A 1,000 square kilometer patch of solar panels in Africa can power most of Europe

The $500 billion Desertec initiative would have constructed massive solar farms in the Sahara and expansive electrical transmission networks across continents. However, the plan was built on concentrated solar power technology, which is more expensive and less practical than photovoltaics.

How to make your own DIY ionic thruster

In the search for more efficient, sustainable types of propulsive thrust, scientists have dabbled in developing engines using ionic thrust, a type of propulsion using the attractive force of oppositely charged ions. First introduced by a Russian...