Water vapor is used to manage heat in high-end smartphones

Our bodies cool us down by sweating because water requires a significant amount of energy to change state from liquid to gas, making it an ideal medium for carrying thermal energy away from our bodies.

Watch a server submerged in a fluid continue to run and stay cool by boiling the liquid away.

Data centers can be kept cool by circulating fluid over plates atop high-temperature components or by submerging equipment in non-corrosive oil that does not conduct electricity.

Heat pumps use an easily boilable chemical to regulate temperature

In air conditioners, warm air is pulled from a home to turn a refrigerant into a gas, which is then compressed, raising its temperature. The gas naturally releases this energy to the comparatively cooler environment when exposed, then expands and is reused in the system. Heaters run in reverse, with the refrigerant picking up energy from the comparatively warmer environment.

IBM Quantum’s dilution refrigerators keep quantum processors colder than space

In IBM’s quantum lab, quantum processors are kept at a temperature of 15 millikelvin using dilution refrigerators. These refrigerators use nested thermal layers, cryogens like liquid nitrogen and helium, and powerful compressors to maintain the ultra-cold temperatures required for qubit stability and performance.

Some materials can absorb low-energy light and emit high-energy radiation

Through anti-Stokes cooling, incoming energy is combined with vibrations in a material's crystal lattice to produce a net reduction in its temperature. Using this effect, lasers can be directed at microchip hot spots to help keep data centers cool.

Dilution fridges create the colder-than-space environments needed for quantum computers by successively lowering temperatures across layers plated with gold, which reduces heat transfer via radiation and gives them a chandelier-like appearance.

Synthetic diamonds may be used to cool microchips

The strong carbon bonds in diamonds efficiently carry vibrations, allowing them to conduct heat several times faster than copper, a metal commonly used in heat sinks. AI and high-performance computing have pushed researchers to investigate alternative materials for cooling solutions.

Fast charging can lead to battery degradation if the device does not stay cool

Modern phones use software to monitor charging habits and can activate adaptive charging to delay charging rates and prevent overheating. When charging, devices should not be confined (e.g., stored in your pocket) or placed in direct sunlight, as this can trigger heat warnings and sudden shutdowns.

Since 2022, two-thirds of data centers have been built in water-stressed areas

In residential evaporative cooling systems, 10% of consumed water is lost to evaporation compared to 80% in data centers. Although some companies have pledged to become water-positive—replenishing more freshwater than they consume—by 2030 through a transition to air cooling, only 10% of data center operators track water use across all their facilities.

The boiling temperature of water decreases with increasing elevation because the molecules need less energy to overcome the lower atmospheric pressure associated with thinner air.

Explaining the Leidenfrost effect, where water can hover and move against gravity

Water droplets can glide across surfaces whose temperatures are well above water's boiling point. This heat instantly vaporizes the bottom of the droplet, creating a layer of steam that the rest of the droplet rides and bounces upon. This can be seen when sprinkling water on skillets to determine if the surface is hot enough to cook on.

Data centers require interconnected server- and building-level cooling systems

Computer equipment can be cooled by circulating cold air or water through the equipment racks, siphoning the heated fluid into a heat exchanger. This exchanger transfers thermal energy to building cooling systems, which can dispose of the heat by evaporative cooling—the way humans cool off by sweating—or via air conditioning.

Thermodynamics makes building data centers in space to cool equipment impractical

Rather than cooling via interactions with flowing cold air or water, data centers in space would dissipate energy primarily by radiation, in which an object at any temperature above absolute zero emits light. This method is much less efficient at cooling and would require hyperscale data centers to have radiator panels thousands of times larger than those on the International Space Station.

Beyond a certain pressure and temperature, matter can become a supercritical fluid—an exotic state of matter that simultaneously exhibits properties of gases and liquids.

Health workers may cool body temperatures with convection cooling

That's spraying a patient with water and putting fans over them. Cooling the body by removing clothing and placing cold water and ice packs—and not blocking evaporation—are essential cooling steps.

13 unconventional ways to stay cool during heat waves

While air conditioning is the default solution for many in a heat wave, it can get expensive while requiring the consumption of fossil fuel energy. So, how else can you stay cool during a heat wave? This list compiles some practical, at times quirky, suggestions, including an ice-pack-filled aubergine hat.

The gradual loss of capacity in rechargeable batteries can be delayed by avoiding overnight charging, charging to 100%, fast charging, and exposing your device to excessive heat.

How freeze-drying leaves food with less than 4% of its original water content

In specialized equipment, foods are brought down to temperatures below freezing before a vacuum pump removes the air from the container, lowering the pressure around the food and the boiling temperature of water. Heaters beneath the food slowly raise its temperature above the now-reduced boiling point, causing the water to go from a frozen to a gaseous state.

Some geothermal power plants make electricity using a secondary fluid

Direct dry-steam systems pull underground steam into a turbine-generator system, while flash and double-flash cycle systems spray extracted liquid water into a low-pressure tank, causing it to rapidly vaporize—"flash"—before moving to the turbine. Binary cycle systems use the extracted steam and water to flash a second fluid that easily boils, which then drives the turbine.

Sand 'batteries' can store excess electricity from the power grid as thermal energy

Energy collected from solar or wind power is used to heat insulated silos full of sand to temperatures as high as 450 degrees Celsius (842 degrees Fahrenheit), which can be retained for long periods. These thermal energy storage systems can be designed to boil water and generate electricity when needed.

The industrial methods for recovering helium, including filters and cryogenic separation

Membranes with microscopic pores of varying sizes can be used to selectively filter out components of natural gas, including helium, which can then be concentrated. Because helium requires the lowest temperature of all elements to condense into a liquid, extracted natural gas can also be cooled until only helium remains as a gas.

Most advanced touch screens rely on electrical charge in your skin

Capacitive touch screens store electrical charges in an electrostatic grid of tiny wires. When we touch the screen a tiny electrical charge is transferred from the screen to the finger to complete a circuit (since skin has positive and negative charges). This connection creates a voltage drop on that point of the screen. Cloth, however, doesn't conduct electricity, which is why humans can't wear thick gloves and operate their smartphones.

The virtual reality era has finally arrived

The smartphone era has driven a large share of the consumer electronics market for almost 20 years now. But what comes next? Dominant computing platforms come and go over time, and there’s reason to believe that mixed reality devices like headsets and glasses might be the form factor that eventually replaces smartphones. This article presents a snapshot of where we are right now in the VR era, and what the future holds.

A smartphone contains over a dozen rare earth elements

One of the most important elements is indium, which makes up an electrically-conductive mesh beneath the display that provides touchscreen functionality. Alloys containing REEs are used in the magnets needed for the microphone and speaker.

Microwave ovens heat food by agitating certain molecules with non-ionizing light

Molecules with resonant frequencies within the microwave range vibrate, producing heat between adjacent matter, just as hands warm when rubbed together. The mesh in front of an oven's door confines the microwaves to the container, while the rotating plate allows different parts of food to travel through regions of maximum vibration.

When users prompt AI chatbots, both cooling systems that support data centers and power plants that rely on steam cycles to generate electricity for data centers contribute to water use.

Microchip fabricators create light by heating tin droplets to over 220,000 Kelvin

Every second, lasers strike 50,000 droplets moving at 250 kilometers (155 miles) per hour, vaporizing the tin in supernova-like miniature explosions that produce ultraviolet light. Knowing this light will spread via diffraction as it passes through a filter during manufacturing, designers reverse-engineer the filter design based on the required final microchip pattern.

Geothermal power can be used beyond heating and energy production

Depending on the depth of the natural vents or artificial wells drilled, the surrounding fluid temperature will vary greatly—from 10 to 371 degrees Celsius (50 to 700 degrees Fahrenheit)—allowing for various applications, including the drying of cement, concrete, and lumber, as well as the processing of pulp and paper.

Solid-state batteries substitute the fluid electrolyte layer with a solid

The non-flammable solid greatly reduces the risk of fire and explosion, as well as the release of toxic gases via leaks in the existing sulfide-based systems. These batteries use garnet-type solid electrolytes, which provide high ionic conductivity and chemical stability but require temperatures above 1,000 degrees Celsius (1,800 degrees Fahrenheit) for fabrication.

Lasers help build the layers of circuit components in microchips

During the photolithography process, light is projected through a blueprint onto a light-sensitive chemical layer on silicon wafers, etching patterns that become transistors through a series of successive reactions. These processes require significant electricity, as only about 2% of photons reach the wafer.

Mixed reality devices and other wearables may usurp smartphones

The integration of smartphone features into watches, glasses, and even clothing suggests future technology may be geared toward working independently in the background. Mixed reality technologies are expected to facilitate this ambient computing world by seamlessly and proactively displaying real-time content without physical interactions solely in the real world.

Desalination involves costly, energy-intensive methods for producing freshwater

Thermal desalination heats saltwater to produce steam, and reverse osmosis forces saltwater through a membrane that only allows water through. In both cases, freshwater is collected and remineralized for consumption, while wastewater brine is often returned to the ocean, where it may harm marine organisms.

The history of many kitchen appliances involves unexpected discoveries and applications, including wartime radar turned hamster defroster and replacing an 'ice king' with heat-stealing boxes.

Infrared light is most often associated with thermal radiation and cooking food

Although extensively used in remote controls for electronics, where LED lights send signals wirelessly, infrared cameras allow for night vision and thermography—imaging of heat patterns in the body to non-invasively reveal blood flow for supplementary diagnostics. Infrared radiation also provides heat in toasters, saunas, and other technologies.

Cloud formation requires water vapor and condensation nuclei to build from

The nuclei—particles like dust, salt, and smoke—act like jumpstarts that water molecules can start to accumulate onto to form clouds. Condensation nuclei are about 1/100th the size of cloud droplets, which are mostly water.

Within fabrication plants, it takes about three months to manufacture hundreds of microchips from a single wafer of pure silicon using light and significant quantities of electricity, water, and hazardous chemicals.

Samsung makes much more than smartphones

Samsung is best known for its highly popular smartphones and related consumer electronics. But the business, first created in 1938, is a conglomerate invested in container shipping, tank building, and even real estate construction like the Burj Khalifa. Its annual $200B in revenue comprises 20% of South Korea's gross domestic product. Watch this video for more on this diverse, enormous company.

What is a heat dome?

The world is seeing regular heat waves with multiple causes, including so-called "heat domes," a term rising in use in recent years. A heat dome occurs when the atmosphere traps hot ocean air like a lid or cap, creating stifling conditions and resulting in extended periods of heat. See an illustration of this phenomenon and read how it works with this brief explainer.

If two strands of conducting materials are connected at two junctions, electricity can be generated if one junction is heated while the other is cooled—a phenomenon known as the Seebeck effect.

Silicon must be 99.9999999% pure to be used in creating microchips

After the mined quartz is processed in an electric-arc furnace to remove oxygen from the silica, it undergoes the Siemens process, where it is bathed in hydrochloric acid. The liquid produced in the reaction undergoes multiple distillations to produce ultra-pure silicon in the end.

Despite accounting for less than 1% of the country's water consumption in 2023, US data centers' water use for cooling and electricity generation can increase water stress in drought-affected areas.

Lasers can be used to reduce the motion of atoms because particles of light—photons—can collide with particles of matter, as billiard balls do, to slow them down.

Aquifer thermal energy storage systems bank water heated during the summer in aquifers—layers of porous rock, gravel, and sand filled with groundwater—which are then collected in winter to warm homes.

The properties of helium, which has the lowest boiling point of any element

The colorless, odorless, mainly unreactive element condenses from a gas into a liquid at -268.928 degrees Celsius (-452.07 degrees Fahrenheit)—near the lowest theoretically possible temperature—allowing it to serve as a liquid coolant in machines without the risk of causing damage as a solid.

Photolithography etches circuit components into a semiconductor wafer

A high-energy laser is fired at molten tin droplets, turning them into plasma that releases the ultraviolet light needed to burn the wafer's photoresist layer. A mask controls what parts of the wafer are etched for subsequent chemical processing.

Transpiration drives water movement through a plant’s vascular system

Water evaporates from the leaves, creating tension that pulls more water upward from the roots through the xylem—the equivalent of plant blood vessels. This process is supported by water molecules sticking to each other (cohesion) and xylem walls (adhesion).

The importance of volatile aroma compounds in the flavor quality of food

Processes such as air movement and heating cause food to lose aroma molecules, which studies have shown play a major role in our sense of taste. While losing these molecules to the environment leaves fewer to be processed during consumption to intensify flavor, it can also produce previously nonexistent aroma compounds or release previously trapped ones, altering or enhancing the food's flavor.

How geometry and uneven charge distribution make some molecules greenhouse gases

Molecules vibrate and rotate with different frequencies based on their elemental composition and shape, which can produce uneven distributions of electrons, as seen in carbon dioxide and water. The resulting unbalanced electric field can interact with electromagnetic waves of the same frequency, causing the molecule to absorb the radiation.

High-frequency sound waves have been used to brew espresso with room-temperature water and about one-fourth the energy of a traditional espresso machine, which relies on hot water and pressure.