Data centers can be kept cool by circulating fluid over plates atop high-temperature components or by submerging equipment in non-corrosive oil that does not conduct electricity.

Watch a server submerged in a fluid continue to run and stay cool by boiling the liquid away.

Data centers require interconnected server- and building-level cooling systems

Computer equipment can be cooled by circulating cold air or water through the equipment racks, siphoning the heated fluid into a heat exchanger. This exchanger transfers thermal energy to building cooling systems, which can dispose of the heat by evaporative cooling—the way humans cool off by sweating—or via air conditioning.

Thermodynamics makes building data centers in space to cool equipment impractical

Rather than cooling via interactions with flowing cold air or water, data centers in space would dissipate energy primarily by radiation, in which an object at any temperature above absolute zero emits light. This method is much less efficient at cooling and would require hyperscale data centers to have radiator panels thousands of times larger than those on the International Space Station.

Some materials can absorb low-energy light and emit high-energy radiation

Through anti-Stokes cooling, incoming energy is combined with vibrations in a material's crystal lattice to produce a net reduction in its temperature. Using this effect, lasers can be directed at microchip hot spots to help keep data centers cool.

Health workers may cool body temperatures with convection cooling

That's spraying a patient with water and putting fans over them. Cooling the body by removing clothing and placing cold water and ice packs—and not blocking evaporation—are essential cooling steps.

Since 2022, two-thirds of data centers have been built in water-stressed areas

In residential evaporative cooling systems, 10% of consumed water is lost to evaporation compared to 80% in data centers. Although some companies have pledged to become water-positive—replenishing more freshwater than they consume—by 2030 through a transition to air cooling, only 10% of data center operators track water use across all their facilities.

Watch a time-lapse of the construction of a data center

After the external structure of a data center is built, cooling systems are installed, followed by interior offices and other rooms. Before installing racks of servers and other equipment, floors are raised beneath where they will be installed to create space for cold fluid to be pumped into the hardware and to facilitate cable management.

Water vapor is used to manage heat in high-end smartphones

While smartphones have traditionally been cooled using a highly conductive plate that dissipates heat from the chip, vapor chambers offer a higher heat-removal capacity. This technology has been utilized in laptops for decades to absorb heat by cycling a fluid between liquid and gaseous phases.

Dilution fridges create the colder-than-space environments needed for quantum computers by successively lowering temperatures across layers plated with gold, which reduces heat transfer via radiation and gives them a chandelier-like appearance.

Synthetic diamonds may be used to cool microchips

The strong carbon bonds in diamonds efficiently carry vibrations, allowing them to conduct heat several times faster than copper, a metal commonly used in heat sinks. AI and high-performance computing have pushed researchers to investigate alternative materials for cooling solutions.

View the layout and components that make up a typical data center

Alongside server rooms for the storage, processing, and transmission of data, data centers include climate control systems to manage the heat generated by microchips, backup systems to ensure systems can run during power outages, offices for on-site personnel, and monitoring and security stations to provide continuous protection against physical threats.

When users prompt AI chatbots, both cooling systems that support data centers and power plants that rely on steam cycles to generate electricity for data centers contribute to water use.

IBM Quantum’s dilution refrigerators keep quantum processors colder than space

In IBM’s quantum lab, quantum processors are kept at a temperature of 15 millikelvin using dilution refrigerators. These refrigerators use nested thermal layers, cryogens like liquid nitrogen and helium, and powerful compressors to maintain the ultra-cold temperatures required for qubit stability and performance.

Our bodies cool us down by sweating because water requires a significant amount of energy to change state from liquid to gas, making it an ideal medium for carrying thermal energy away from our bodies.

Some geothermal power plants make electricity using a secondary fluid

Direct dry-steam systems pull underground steam into a turbine-generator system, while flash and double-flash cycle systems spray extracted liquid water into a low-pressure tank, causing it to rapidly vaporize—"flash"—before moving to the turbine. Binary cycle systems use the extracted steam and water to flash a second fluid that easily boils, which then drives the turbine.

Since 2026, the Large Hadron Collider has provided heat to thousands of French homes and businesses through a system that harnesses hot water from the accelerator's cooling circuits.

Aquifer thermal energy storage systems bank water heated during the summer in aquifers—layers of porous rock, gravel, and sand filled with groundwater—which are then collected in winter to warm homes.

Sand 'batteries' can store excess electricity from the power grid as thermal energy

Energy collected from solar or wind power is used to heat insulated silos full of sand to temperatures as high as 450 degrees Celsius (842 degrees Fahrenheit), which can be retained for long periods. These thermal energy storage systems can be designed to boil water and generate electricity when needed.

The Large Hadron Collider is the world's largest cryogenic system, which uses 10,000 metric tons of liquid nitrogen and 120 metric tons of helium to cool 36,000 metric tons of magnets to temperatures colder than outer space.

Geothermal power can generate electricity and provide direct heating for homes

By drilling several kilometers through penetrable rock, wells can access highly pressurized groundwater warmed by thermal energy trapped beneath Earth's surface. This water can be turned into steam to create electricity in generators. Heating systems several meters deep can pump fluid underground before circulating it through buildings.

Within fabrication plants, it takes about three months to manufacture hundreds of microchips from a single wafer of pure silicon using light and significant quantities of electricity, water, and hazardous chemicals.

A basement of mechanical systems—collectively called the technosphere—supports B2

Twenty-six underground air handlers heat, cool, filter and manage the humidity of the air across the biomes of Biosphere 2. The above-ground Energy Center complex provides continuous power to these and other systems, including heating and cooling water for laboratory experiments and personal use.

Heat pumps use an easily boilable chemical to regulate temperature

In air conditioners, warm air is pulled from a home to turn a refrigerant into a gas, which is then compressed, raising its temperature. The gas naturally releases this energy to the comparatively cooler environment when exposed, then expands and is reused in the system. Heaters run in reverse, with the refrigerant picking up energy from the comparatively warmer environment.

Carbon-neutral data centers may be possible if built within wind turbines

Wind turbine towers are typically hollow, housing only cables and a ladder for maintenance access. The excess electricity a wind turbine collects could power a stack of server racks more than 100 meters (328 feet) high within its tower.

Despite accounting for less than 1% of the country's water consumption in 2023, US data centers' water use for cooling and electricity generation can increase water stress in drought-affected areas.

Most of the critical mineral supply needed for US data centers is imported

The country with the most data centers relies on other nations for about 80% of the rare earth elements needed for magnetic materials in storage drives, 64% of the silver and 85% of the platinum it uses for electrical circuitry, and about half the aluminum and copper used in heat sinks that dissipate thermal energy from electronic components.

According to the International Energy Agency, hyperscale data centers consume about as much electricity annually as 400,000 electric vehicles to provide 24/7 access to online applications, services, and information.

Research suggests AI data centers may be creating microclimate heat islands

An analysis of satellite data from 2004 to 2024 showed that land surface temperatures in the areas surrounding AI data centers typically increase by an average of 2 degrees Celsius (3.6 degrees Fahrenheit) after they begin running. Across the 6,000 global data centers analyzed by the study, temperatures increased by as much as 9.1 degrees Celsius (16.4 degrees Fahrenheit).

Microchip fabricators create light by heating tin droplets to over 220,000 Kelvin

Every second, lasers strike 50,000 droplets moving at 250 kilometers (155 miles) per hour, vaporizing the tin in supernova-like miniature explosions that produce ultraviolet light. Knowing this light will spread via diffraction as it passes through a filter during manufacturing, designers reverse-engineer the filter design based on the required final microchip pattern.

Unlike solar panels, which convert sunlight directly into electricity, concentrated solar power systems focus sunlight to heat a material that boils water, which then drives a turbine-generator to produce electricity.

Modular data centers can be transported on a truck for rapid deployment

Bypassing the complications involved in building larger facilities over the course of several years, such as construction costs and permits, these pre-fabricated, self-contained pods, roughly the size of shipping containers, can carry thousands of graphics processing units for small- and medium-scale AI-related tasks.

Geothermal power plants can provide large-scale energy storage for other systems

These facilities can store excess energy from solar and wind power as hot water or steam, which can be used to run turbines to generate electricity when other renewable energy sources are unavailable. Simulations have found efficiencies of 90% during a storage-use cycle, making it comparable to lithium-ion batteries.

13 unconventional ways to stay cool during heat waves

While air conditioning is the default solution for many in a heat wave, it can get expensive while requiring the consumption of fossil fuel energy. So, how else can you stay cool during a heat wave? This list compiles some practical, at times quirky, suggestions, including an ice-pack-filled aubergine hat.

In nuclear reactors, water acts as a coolant and moderator, slowing neutrons produced in nuclear reactions so they are more likely to interact with nuclear fuel and generate sustainable energy.

Fracking technology can help make geothermal power possible almost everywhere

Generating electricity from Earth's thermal energy has previously required existing underground reservoirs of hot water and permeable rocks through which the fluid naturally escapes. Today, fractures can be artificially created to form fluid pathways, and surface water can be injected underground and brought back to the surface.

Today's massive data centers evolved from single-room mainframes

Punch card computers from the late 1940s were used to store and process a company's data locally before the advent of desktop computers. As the amount of data and company sizes increased alongside the miniaturization of technology, mainframes were replaced by local server rooms and external facilities with interconnected servers running cloud-based and AI software.

Watch a tour of an integrated circuit fabrication plant

Explore the protocols in place to ensure clean rooms have no dust to jeopardize the integrity of silicon wafers as they are transformed into working microchips. Layering, photolithography, etching, and chemical vapor deposition are shown alongside digital visualizations.

Beyond a certain pressure and temperature, matter can become a supercritical fluid—an exotic state of matter that simultaneously exhibits properties of gases and liquids.

Enhanced geothermal power systems can trigger earthquakes by injecting fluid into rock, increasing subterranean pressure.

Lasers help build the layers of circuit components in microchips

During the photolithography process, light is projected through a blueprint onto a light-sensitive chemical layer on silicon wafers, etching patterns that become transistors through a series of successive reactions. These processes require significant electricity, as only about 2% of photons reach the wafer.

Since computers rely on the distribution of electrons in microchips to represent binary code, cosmic rays and ionizing radiation from radioactive elements can introduce software errors by detaching electrons from atoms.

Geothermal power can be used beyond heating and energy production

Depending on the depth of the natural vents or artificial wells drilled, the surrounding fluid temperature will vary greatly—from 10 to 371 degrees Celsius (50 to 700 degrees Fahrenheit)—allowing for various applications, including the drying of cement, concrete, and lumber, as well as the processing of pulp and paper.

Fish in polar waters contain proteins in their blood that act as antifreeze, and some manufacturers have used lab-grown versions of these proteins to help keep ice cream smooth.

How freeze-drying leaves food with less than 4% of its original water content

In specialized equipment, foods are brought down to temperatures below freezing before a vacuum pump removes the air from the container, lowering the pressure around the food and the boiling temperature of water. Heaters beneath the food slowly raise its temperature above the now-reduced boiling point, causing the water to go from a frozen to a gaseous state.

While carbon capture and storage systems collect carbon dioxide at the source, such as power plants, direct air capture systems extract it from the atmosphere.

Desalination involves costly, energy-intensive methods for producing freshwater

Thermal desalination heats saltwater to produce steam, and reverse osmosis forces saltwater through a membrane that only allows water through. In both cases, freshwater is collected and remineralized for consumption, while wastewater brine is often returned to the ocean, where it may harm marine organisms.

If two strands of conducting materials are connected at two junctions, electricity can be generated if one junction is heated while the other is cooled—a phenomenon known as the Seebeck effect.

Heat slowly moves through Earth's mantle like softened wax

Energy trapped during Earth's formation and released via the radioactivity of elements is carried by convection currents towards the surface, while cooler, denser material sinks. The planet's core is almost as hot as the sun's surface.

If the temperature of water continuously decreases but it is not given room to expand, it will eventually contract and form exotic forms of ice that sink in liquid water.

City structures cause localized heat zones hotter than nearby rural areas

Urban materials like asphalt and concrete trap heat, while cities lack cooling features like trees and water. Due to hot runoff, urban streams can heat up by as much as 18°F more than forested streams.